MATERIAL SAFETY DATA SHEET
StaycellTM 245-2.0, Component B
1. Product and Company Identification
Manufacturer Emergency Contacts & Phone Number
Manufacturer
CHEMTREC: 800-424-9300
Preferred Solutions, Inc.
7819 Broadview Road
Cleveland, OH 44131
Company Contact: Jack S. Stahl
Telephone Number: 800-522-4522
Fax Number: 216-642-1166
Issue Date: 04/03/07
Product Name: StaycellTM 245-2.0, Component B
2. Composition/Information On Ingredients
Percent of
Ingredient Name CAS Number Total Weight
hydrofluorocarbons 460-73-1 7 -13
2-butoxyethanol 111-76-2 1- 5
2,2'-oxybis(n,n-dimethylenthanamine) 3033-62-3 0 - 1.5
aromatic diamine 68479-98-1 < 0.1 - 5
dimethylcylohexylamine 98-94-2 0.1 - 5
polyol blend Not Available 40 - 100
chlorinated phosphate ester 13674-84-5 7 - 13
EMERGENCY OVERVIEW
CAUTION. Direct skin and eye contact may cause irritation or burns.
Appearance/Odor: Amber colored liquid with a slight aromatic odor.
3. Hazards Identification
Primary Routes(s) of Entry
Skin & Eye Contact, Inhalation.
Eye Hazards
May cause eye irritation. Irritation may be severe, causing burns and leading to permanent eye damage.
Skin Hazards
May cause skin irritation. Irritation may be severe resulting in burns to the skin from prolonged contact. A
minor constituent in this product is in a class of compounds that may cause cholinesterase inhibition.
Symptoms of such inhibition may include salivation, sweating, headache, nausea and abdominal cramps.
Ingestion Hazards
Harmful if swallowed. Ingestion may cause: corrosive lesions of the mouth, throat and esophagus,
gastrointestinal upset, nausea and vomiting, abdominal pain, central nervous system depression and
neurological disorders. Ingestion may result in injury to the liver and kidneys.
3. Hazards Identification - Continued
Inhalations Hazards
Inhalation of vapors or mists may cause irritation of the nose and throat. Symptoms of respiratory tract
irritation include sore throat, coughing, wheezing, and shortness of breath. Severe cases can result in
pulmonary edema and even death. A minor constituent in this product is in a class of compounds that
may cause cholinesterase inhibition. Symptoms of such inhibition may include salivation, sweating,
headache, nausea and abdominal cramps.
1
MATERIAL SAFETY DATA SHEET
StaycellTM 245-2.0, Component B
Chronic/Carcinogenicity Effects
None of the ingredients of this product comprising over 0.1% are classified as carcinogenic according to
OSHA, National Toxicology Program (NTP), International Agency for Research on Cancer (IARC) or the
American Conference of Governmental Industrial Hygienists (ACGIH).
Reproductive Effects
This product contains a material (lead naphthenate) that may cause adverse reproductive effects.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention immediately. Remove contact lenses, if worn.
Skin
Remove contaminated clothing and shoes. In case of contact, immediately flush skin with plenty of water
for at least 15 minutes. Get medical attention immediately.
Ingestion
Call a physician or a poison control center immediately.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. If not
breathing, give artificial respiration. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: 269?F.
Flash Poinat Method: closed cup
Lower Explosive Limit: 7.1%
Upper Explosive Limit: 17.7%
Fire and Explosion Hazards
Thermal decomposition (burning) may release irritating, corrosive and/or toxic gases, vapors and fumes.
Closed containers may explode when heated due to increased pressure. Do not puncture, cut open or
reuse empty containers.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire. Water spray or fog, carbon dioxide
(CO2), dry chemical, alcohol foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate personal protective equipment (PPE). Contain and/or
absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose. Avoid runoff to waterways
and sewers.
7. Handling and Storage
Handling and Storage Precautions
Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Protect from physical damage.
Use only with adequate ventilation. Wash thoroughly after handling. Empty containers may contain
hazardous residue, do not reuse. Open containers slowly to allow any pressure build-up to vent safely.
Do not open or spray near eyes and face.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate ventilation. When used outdoors, stay well away from building air intakes or close the
intakes to prevent product from entering building.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
2
MATERIAL SAFETY DATA SHEET
StaycellTM 245-2.0, Component B
Skin Protection
Use with chemical-protective gloves to prevent excessive skin contact. Chemical-resistant gloves made
of rubber can be used.
Respiratory Protection
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a
health or safety professional. If required, use a NIOSH-approved air-purifying respirator with organic
vapor cartridge or supplied air respirator.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
2-butoxyethanol
ACGIH TLV-TWA 20 ppm
OSHA PEL-TWA 50 ppm (Skin)
2,2'-oxybis(n,n-dimethylethanamine)
ACGIH TLV-STEL 0.15 ppm (Skin)
ACGIH TLV-TWA 0.05 ppm (Skin)
9. Physical and Chemical Properties
Appearance
Amber colored liquid
Odor
Low, slight aromatic
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: not available 篎.
Specific Gravity: 1.2 at 70?F.
Vapor Pressure: not available
pH Factor: 7-10
Solubility: moderate in water
10. Stability and Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials
Avoid contact with strong oxidizing agents, acids.
Hazardous Decomposition Products
Toxic and irritating gases, vapors or fumes of: carbon monoxide (CO), carbon dioxide (CO2), oxides of
nitrogen, hydrogen fluoride, aldehydes, ketones
3
MATERIAL SAFETY DATA SHEET
StaycellTM 245-2.0, Component B
11. Toxicological Information
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for
individual ingredients are summarized below.
Ingredients(s) - Toxicological Data
2-butoxyenthanol
oral-rat LD50: 500 mg/kg
2,2'-oxybis(n,n-dimethylethanamine)
oral-rat LD50: 570 mg/kg
dermal-rabbit LD50: 750 mg/kg
aromatic diamine
oral-rat LD50: 542 mg/kg
dimethylcyclohexylamine
oral-mouse LD50: 320 mg/kg
dermal-rat LD50: 370 mg/kg
inhal-rat LC 50: 1100 mg/m3/2 hr
chlorinated phosphate ester
oral-rat LD50: 2800 mg/kg
inhal-rat LC50: 4.6 mg/L/4H
12. Ecological Information
No specific information available.
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Avoid/prevent
release to the environment.
14. Transport Information
Not Regulated - Resin Compound
15. Regulatory Information
Sara Hazard Classes
Acute Health Hazard
Ingredient(s) - U.S. Regulatory Information
2-butoxyethanol
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
2-butoxyethanol
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
dimethylcyclohexylamine
New Jersey - Workplace Hazard
New Jersey - Special Hazard
New York City - Hazardous Substance
15. Regulatory Information - Continued
Canadian Regulatory Information
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS
contains all the information required by the CPR. WHMIS Classification: D1B - Toxic
Ingredient(s) - Canadian Regulatory Information
2-butoxyethanol
WHMIS - Ingredient Disclosure List
dimethylcyclohexylamine
4
MATERIAL SAFETY DATA SHEET
StaycellTM 245-2.0, Component B
WHMIS - Ingredient Disclosure List
WHMIS - Canada (Pictograms)
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
This MSDS Supersedes A Previous MSDS Dated: 05/12/05
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no
warranties and make no representations as to the accuracy or completeness of the information
contained therein, and assume no responsibility regarding the suitability of this information for
the user's intended purposes or for the consequences of its use. Each individual should make a
determination as to the suitability of the information for their particular purposes.
PREFERRED SOLUTIONS, INC.
5
|