MATERIAL SAFETY DATA SHEET
Page 1 of 4
RT 5050-B Series
1. Product And Company Identification
Manufacturer Manufacturer Emergency Contacts & Phone Number
HENRY COMPANY CHEMTREC: 800-424-9300
2270 Castle Harbor Place
Ontario, CA 91761
Company Contact: R&D Dept.
Telephone Number: 909-947-7224
Web Site: www.resintechnology.com
Issue Date: 10/26/2006
Product Name: RT 5050-B Series
MSDS Number: 17
Product/Material Uses
Polyurethane Foam Resin
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
diethylene glycol 111-46-6 0-5
polyol blend not avail. 60 - 100
chlorinated phosphate ester 13674-84-5 10 - 30
EMERGENCY OVERVIEW
CAUTION. Direct skin and eye contact may cause irritation. Contact may cause skin sensitization.
Appearance/Odor: Amber liquid, slight aromatic odor
3. Hazards Identification
Primary Routes(s) Of Entry
Inhalation.
Eye Hazards
May cause eye irritation. Symptoms may include stinging, redness and tearing.
Skin Hazards
May cause skin irritation. Harmful if absorbed through skin. A minor constituent in this product is in a class of
compounds that may cause cholinesterase inhibition. Symptoms of such inhibition may include salivation,
sweating, headache, nausea and abdominal cramps.
Ingestion Hazards
Ingestion of significant quantities is thought to be unlikely. May be harmful if swallowed. Ingestion may cause:
gastrointestinal upset, nausea and vomiting.
Inhalation Hazards
Inhalation of vapors or mists may cause irritation of the nose and throat. Prolonged or repeated inhalation may
cause toxicity to the liver and kidneys. A minor constituent in this product is in a class of compounds that may
cause cholinesterase inhibition. Symptoms of such inhibition may include salivation, sweating, headache, nausea
and abdominal cramps.
MATERIAL SAFETY DATA SHEET Page 2 of 4
RT 5050-B Series
3. Hazards Identification - Continued
Chronic/Carcinogenicity Effects
None of the ingredients of this product comprising over 0.1% are classified as carcinogenic according to OSHA,
National Toxicology Program (NTP), International Agency for Research on Cancer (IARC) or the American
Conference of Governmental Industrial Hygienists (ACGIH).
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water. Get medical attention
immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
Call a physician or a poison control center immediately.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. If not breathing,
give artificial respiration. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: 269 癋
Flash Point Method: closed cup
Lower Explosive Limit: no data
Upper Explosive Limit: no data
Fire And Explosion Hazards
Thermal decomposition (burning) may release irritating, corrosive and/or toxic gases, vapors and fumes. Closed
containers may explode when heated due to increased pressure. Do not puncture, cut open or reuse empty
containers.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire. Water spray or fog, carbon dioxide (CO2), dry
chemical, alcohol foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Eliminate all ignition sources. Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Collect and
dispose. Avoid runoff to waterways and sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Protect from physical damage. Use
only with adequate ventilation. Wash thoroughly after handling. Empty containers may contain hazardous
residue, do not reuse. Open containers slowly to allow any pressure build-up to vent safely. Do not open or
spray near eyes and face.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate ventilation. When used outdoors, stay well away from building air intakes or close the intakes
to prevent product from entering building.
MATERIAL SAFETY DATA SHEET Page 3 of 4
RT 5050-B Series
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Use with chemical-protective gloves to prevent excessive skin contact.
Respiratory Protection
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health
or safety professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge or
supplied air respirator.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
9. Physical And Chemical Properties
Appearance
Amber-colored liquid
Odor
Slight aromatic odor
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: not available 癋
Specific Gravity: 1.05-1.25 @70篎
Vapor Pressure: not available
pH Factor: 7-10
Solubility: moderate in water
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials
Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products
Toxic and irritating gases, vapors or fumes of: carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen
11. Toxicological Information
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for individual
ingredients are summarized below.
Ingredient(s) - Toxicological Data
diethylene glycol
oral-mouse LD50: 2300 mg/kg
oral-rat LD50: 12565 mg/kg
dermal-rabbit LD50: 11890 mg/kg
chlorinated phosphate ester
oral-rat LD50: 2800 mg/kg
inhal-rat LC50: 4.6 mg/L / 4H
12. Ecological Information
Do not allow into any sewer, on the ground, or into any body of water.
MATERIAL SAFETY DATA SHEET Page 4 of 4
RT 5050-B Series
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Avoid/prevent release to the
environment.
14. Transport Information
Not Regulated - Resin Compound
15. Regulatory Information
SARA Hazard Classes
Acute Health Hazard
Ingredient(s) - State Regulations
diethylene glycol
Pennsylvania - Workplace Hazard
Canadian Regulatory Information
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR.
NFPA HMIS
HEALTH 1
1
FLAMMABILITY 1
1 0
REACTIVITY 0
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
This MSDS Supersedes A Previous MSDS Dated: 06/17/1993
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended
purposes or for the consequences of its use. Each individual should make a determination as to the
suitability of the information for their particular purposes(s).
HENRY COMPANY
Printed Using MSDS GeneratorTM 2000
|