MATERIAL SAFETY DATA SHEET
IntegraSeal Class I "B" Component
Page 1 of 4
INTEGRASEAL CLASS I "B" COMPONENT
Distributed by: EMERGENCY PHONE NUMBERS
IDI Distributors CHEMTREC 800-424-9300
7667 Equitable Drive IDI 800-678-6868
Suite 201
Eden Prairie, MN 55344
SECTION 1. MATERIAL IDENTIFICATION
Chemical Family: Polyurethane Polyol Mixture
Chemical Name: Polypropylene Glycol
Synonyms: Polyol, Urethane Resin, B Component
CAS: N/A - Blend
SECTION 2. INGREDIENTS AND HAZARDS
Ingredient Name: Approx.% Exposure Limits
Hydroxyl Terminated Poly (Oxyalkylene) Polyether 15-50 N.E.
Polyethylene Terephthalate Polyester Polyol 5-35 N.E.
Tertiary Amine Bearing Compounds <5 N.E
Tris-(1-Chloro-2-Propyl) Phosphate CAS #13674-84-5 1-15 N.E.
1,1,1,3,3-Pentafluoropropane CAS #460-73-1 2-25 Suggested 300 ppm
SECTION 3. PHYSICAL DATA
Appearance: Viscous Liquid
Color: Amber to Dark Brown
Odor: Aromatic Polyester
Molecular Weight: Proprietary
Melt Point/Freeze Point: <32 F?(<0?C)
Boiling Point: Decomposes
Vapor Pressure: Not Established
Vapor Density (air=1): Not Established
Specific Gravity (H20=1): 1.1
Water Solubility: Slight
SECTION 4. FIRE AND EXPLOSION DATA
Flash Point: 248?F (120?C) PMCC
Limits
LEL %: Not Established (non-volatile fluid)
UEL %: Not Established (non-volatile fluid)
7667 Equitable Drive, Suite 201, Eden Prairie, MN 55344
Toll Free: 800-678-6868 Fax: 952-937-9809
www.idimn.com
MATERIAL SAFETY DATA SHEET
IntegraSeal Class I "B" Component
Page 2 of 4
SECTION 4. FIRE AND EXPLOSION DATA (continued)
Extinguishing Media: Dry chemical extinguishers such as monoammonium phosphate,
potassium sulfate, and potassium chloride. Additionally, carbon
dioxide, high expansion (proteinic) chemical foam, water spray for
large fires.
Special Fire Fighting Do not direct solid water stream or foam into hot, burning pools; this
Procedures: may cause frothing and increase fire intensity. Use self-contained
breathing apparatus and body-covering protective clothing.
Unusual Fire And Contact with certain finely divided reactive materials may cause
Explosion Hazards: reactions. Decomposition products may be hazardous.
SECTION 5. HEALTH EFFECTS DATA
ANIMAL TOXICITY:
Oral, LD50 (ingestion) NE
Dermal, LD50 (skin contact) NE
Inhalation, LC50 (4 hrs.) NE
Aquatic, LC50 (24 hrs.) NE
Eyes NE
Skin NE
HUMAN EFFECTS OF OVEREXPOSURE:
Inhalation: May cause irritation to the throat and respiratory passages but at
room temperature, vapor inhalation is not considered hazardous.
This product contains HFC-245fa. At temperatures above 60癋,
HFC-245fa gas may escape. Vapors may cause dizziness,
tremors, cardiac arrhythmias and cardiac arrest.
Skin: This product contains small amounts of amine catalyst and may
cause irritation to the skin after prolonged contact. Some
individuals may be more sensitive to exposure. Proper protective
equipment should always be worn, when handling. Immediately
wash any skin area that comes in contact.
Ingestion: This is not considered a common occupational route of exposure,
and no observable effects have been demonstrated.
Threshold Limit Value No TLV has been established for this product as a system. It
(ACGIH): contains HFC-245fa - suggested TWA is 300 PPM.
Permissible Exposure Same as above.
Limit (OSHA):
7667 Equitable Drive, Suite 201, Eden Prairie, MN 55344
Toll Free: 800-678-6868 Fax: 952-937-9809
www.idimn.com
MATERIAL SAFETY DATA SHEET
IntegraSeal Class I "B" Component
Page 3 of 4
SECTION 6. EMERGENCY & FIRST AID PROCEDURES
Eye Contact: Flush with clean, lukewarm water at low pressure for no less than 15
minutes, occasionally lifting eyelids. Consult a physician immediately.
Skin Contact: Remove contaminated clothing. Wash exposed area with warm soapy
water thoroughly. Contaminated clothing should be properly laundered
before reusing.
Inhalation: Remove victim from area of exposure to safe area.
Ingestion: Induce vomiting. Never give anything to drink to an unconscious person
or induce vomiting in an unconscious person.
SECTION 7. SPECIAL PROTECTION INFORMATION
Eye Protection: Liquid chemical goggles or full-face shield. No contact lenses should be
worn.
Skin Protection: Chemical resistant gloves such as natural rubber or polyvinyl alcohol.
Cover as much exposed skin as possible with appropriate clothing. If
skin creams are used, keep the area covered by the cream to a
minimum.
Respiratory This product has demonstrated no observable effects at room
Protection: temperature; however, it is highly recommended that an air-purifying
respirator with organic filter cartridges be worn. In addition, in any spray
application, a supplied air source must be provided.
Ventilation: Natural or mechanical. Local exhaust will keep the TLV below minimum
in most cases. Spills or other emergencies may require more forceful
ventilation means.
Other: Safety showers and eye wash stations should be provided in all work
areas. All employees should be properly trained.
SECTION 8. REACTIVITY DATA
Stability: Stable
Polymerization: Will not occur
Incompatibility (Materials To Avoid contact with isocyanates and other substances that react
Avoid): with hydroxyl groups.
Hazardous Decomposition Aliphatic fragments, CO, NH3, CO2
Products:
7667 Equitable Drive, Suite 201, Eden Prairie, MN 55344
Toll Free: 800-678-6868 Fax: 952-937-9809
www.idimn.com
MATERIAL SAFETY DATA SHEET
IntegraSeal Class I "B" Component
Page 4 of 4
SECTION 9. SPILL OR LEAK PROCEDURES
Steps To Be Taken In Case Material Is Spilled Or Released:
? Contain the spilled material with proper absorbent material and utilize personal
protective equipment (PPE)
? Cover with a loose, absorbent material such as oil-dry, vermiculite, sawdust or
Fuller's earth
? Shovel absorbent waste material into proper waste containers
? Wash the contaminated areas thoroughly with hot Industrial soapy water
? Ventilate area to remove vapors
? Report sizeable spills to proper environmental agencies
Waste Disposal Methods: Waste material may be incinerated or disposed of under local,
state and federal regulations controlling environmental protection.
SECTION 10. SPECIAL PRECAUTIONS/STORAGE DATA
Storage Temperature: Keep in a cool, dry, and well-ventilated area.
Average Shelf Life: 3-4 months from date of manufacture
Special Sensitivity (Heat, This product is hygroscopic. Container should be tightly sealed
Light, Moisture): to prevent moisture contamination. Do not expose to high
temperatures for any length of time.
Precautions In If contamination with isocyanates is suspected, do not re-seal
Handling/Storage: container because of possible rupture due to pressure buildup.
This product contains HFC-245fa. Exposure to temperatures
above 60癋 may cause the HFC-245fa to vaporize in the
container causing a pressure buildup. Always slowly vent
container when opening to relieve any pressure buildup.
SECTION 11. SHIPPING DATA
Technical Shipping Name: Polyether Polyol Blend
Dot Hazard Classification: Not-regulated
Freight Class (Bulk): Polypropylene Glycol Mixture
Freight Class (Package): Polypropylene Glycol Mixture
Product Label: "B" Component Polyol
Placards Required: None
HMIS: F-1, H-1, R-0
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED,
EXCEPT THAT IT IS ACCURATE TO THE BEST KNOWLEDGE OF IDI DISTRIBUTORS, INC..
THE DATA ON THESE SHEETS RELATE ONLY TO THE SPECIFIC MATERIAL
DESIGNATED HEREIN. IDI DISTRIBUTORS, INC. ASSUMES NO LEGAL RESPONSIBILITY
FOR USE OR RELIANCE UPON THIS DATA.
7667 Equitable Drive, Suite 201, Eden Prairie, MN 55344
Toll Free: 800-678-6868 Fax: 952-937-9809
www.idimn.com
|