MATERIAL SAFETY DATA SHEET
Page 1 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
1. Product And Company Identification
Supplier Manufacturer
HENRY COMPANY HENRY COMPANY
909 N. Sepulveda Blvd., Suite 650 909 N. Sepulveda Blvd., Suite 650
El Segundo, CA 90245-2724 El Segundo, CA 90245-2724
Company Contact: Technical Services Company Contact: Technical Services
Telephone Number: (800) 486-1278 Telephone Number: (800) 486-1278
Web Site: www.henry.com www.bakor.com Web Site: www.henry.com www.bakor.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: (800) 424-9300 CHEMTREC: (800) 424-9300
CHEMTREC: (703) 527-3887 CHEMTREC: (703) 527-3887
CANUTEC: (613) 996-6666 CANUTEC: (613) 996-6666
Issue Date: 01/25/2010
Product Name: HE574 - BLUESKIN LVC ADHESIVE HE574
Product Code: HE574
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
benzene, 1-chloro-4-(trifluoromethyl) 98-56-6 5 - 15
CYCLOHEXANE 110-82-7 1-5
HEPTANE 142-82-5 1-5
hexane 110-54-3 5 - 15
HYDROCARBON RESINS NA - Mixture 15 - 30
LIGHT NAPHTHA 64742-89-8 1-5
methyl acetate 79-20-9 35 - 55
Mineral Oil 64742-52-5 5 - 15
SYNTHETIC POLYMER BLEND NA Mixture 10 - 20
EMERGENCY OVERVIEW
DANGER! Extremely flammable liquid and vapor. Vapor may cause flash fire. Harmful or fatal if swallowed.
Harmful if absorbed through the skin. Pulmonary aspiration hazard. After ingestion, may enter lungs and
produce damage. High vapor concentrations may cause drowsiness. Can cause eye, skin and respiratory tract
irritation.
.
3. Hazards Identification
Primary Routes(s) Of Entry
Inhalation, skin contact
Eye Hazards
Irritation may be severe, causing burns and leading to permanent eye damage.
Skin Hazards
May cause skin irritation and contact dermatitis upon prolonged contact. May be absorbed through skin in harmful
MATERIAL SAFETY DATA SHEET
Page 2 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
3. Hazards Identification - Continued
Skin Hazards - Continued
amounts.
Ingestion Hazards
Can cause gastrointestinal irritation, nausea and vomiting. Aspiration of material into the
lungs may cause chemical pneumonitis, which can be fatal. Harmful or fatal if swallowed.
Inhalation Hazards
Exposure to vapors may cause respiratory tract irritation. Inhalation of vapors or mists may cause central nervous system
depression, light-headedness, headache, nausea and loss of coordination.
Subchronic (Target Organ Effects)
Central nervous system.
Chronic/Carcinogenicity Effects
Damage to the nervous system of the extremities, peripheral neuropathy, with symptoms including numbness, tingling
and weakness in the toes and fingers, sensory impairment to touch, pain, vibration and temperature, muscular
weakness, blurred vision, coldness of extremities, loss of body weight and reflexes, and even paralysis. Frequent or
prolonged contact may irritate the skin and cause a skin rash (dermatitis).
None of the ingredients of this product comprising over 0.1% are classified as carcinogenic according to OSHA, National
Toxicology Program (NTP), International Agency for Research on Cancer (IARC) or the American Conference of
Governmental Industrial Hygienists (ACGIH).
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention immediately.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water. Get medical attention if symptoms
occur.
Ingestion
Get medical attention immediately. DO NOT INDUCE VOMITING. Never give anything by mouth to an unconscious
victim.
Inhalation
Remove the person from the contaminated area to fresh air. Get medical attention immediately.
Note To Physician
Aspiration of liquid into the lungs during swallowing or vomiting can cause lung inflammation, serious lung damage and
even death from chemical pneumonitis.
5. Fire Fighting Measures
Flash Point: -9.4 癋 -23 癈
Flash Point Method: closed cup
Autoignition Point: 437-851 癋 225-455 癈
Flammability Class: Class 1B
Lower Explosive Limit: 1.2
Upper Explosive Limit: 16
Fire And Explosion Hazards
Extremely flammable liquid and vapor.
MATERIAL SAFETY DATA SHEET
Page 3 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
5. Fire Fighting Measures - Continued
Extinguishing Media
Chemical foam, carbon dioxide (CO2), dry chemical, water spray or water fog.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Wear adequate respiratory protection equipment. Ventilate area. Avoid open flames, sparks or other ignition sources.
Contain any liquids and absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose in accordance with
applicable regulations.
7. Handling And Storage
Handling And Storage Precautions
Keep away from ignition sources. Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Do not handle
or store near heat, sparks, flame, strong oxidents or strong acids. Use only with adequate ventilation. Ground all
containers.
Handling Precautions
SENSITIVE TO STATIC DISCHARGE: Likely to catch fire from near-by spark. Static charge may accumulate by flow or
agitation. Grounding and bonding of containers is required.
For professional or industrial use only. Follow label instructions. Keep out of the reach of children. Not for consumption.
No smoking. Do not breathe vapors. Avoid contact with body. Turn off all pilot lights, flames, stoves, heaters, electric
motors, welding equipment and other sources of ignition. Empty containers must not be washed and re-used for any
purpose. Contact lens wearers must wear protective eye wear around chemical vapors and liquid. Wash hands
thoroughly after handling. Flammable vapors may cause flash fire or ignite explosively. To prevent build-up of vapors,
use adequate natural and/or mechanical ventilation (e.g. open all windows and doors to achieve cross ventilation).
Containers may be hazardous when empty. Never use welding or cutting torch on or near container. Do not cut, drill,
grind, or expose containers to heat, sparks, static electricity or other source of ignition. Explosion may occur causing
injury or death.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. When used outdoors, stay well away from building air intakes or
close and seal the intakes to prevent product from entering building.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Use with chemical-protective gloves made of nitrile or neoprene to prevent skin contact.
Respiratory Protection
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health or safety
professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge and particulate filter
or supplied air respirator.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
HEPTANE
ACGIH TLV-STEL 500 ppm
ACGIH TLV-TWA 400 ppm
OSHA PEL-TWA 500 ppm
MATERIAL SAFETY DATA SHEET
Page 4 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
8. Exposure Controls/Personal Protection - Continued
Ingredient(s) - Exposure Limits - Continued
hexane
ACGIH TLV-STEL 1000 ppm
ACGIH TLV-TWA 50 ppm (Skin)
ACGIH TLV-TWA 500 ppm
OSHA PEL-TWA 500 ppm
methyl acetate
ACGIH TLV-STEL 250 ppm
ACGIH TLV-TWA 200 ppm
OSHA PEL-TWA 200 ppm
Mineral Oil
5 mg/m3
9. Physical And Chemical Properties
Appearance
Liquid.
Odor
Sweet ester odor
Odor Threshold
Not established
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: 133-136 癋 56-58 癈
Specific Gravity: 0.922
Percent Volatiles: 59.8
Percent VOCs: 135 g/L (non-reactive)
Vapor Density: 2.0-2.8 @77篎
pH Factor: not applicable
Solubility: not soluble in water
Evaporation Rate: >1 (butyl acetate = 1)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Avoid extreme temperatures. Keep away from static electricity, ignition sources, heat and flames.
Incompatible Materials
Avoid contact with strong oxidizing agents, strong acids and strong bases.
Hazardous Decomposition Products
Toxic and irritating gases, vapors or fumes of carbon monoxide (CO), carbon dioxide (CO2).
Conditions To Avoid (Polymerization)
Product will not undergo polymerization.
MATERIAL SAFETY DATA SHEET
Page 5 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
11. Toxicological Information
Acute Studies
Chemical Name ORAL LD50 (rat) DERMAL LD50 (rabbit) INHALATION LC50 (rat)
Methyl Acetate 6975 mg/kg > 5000 mg/kg > 16000 ppm (4-hr dose -rat)
Chlorobenzotrifluoride >6800 mg/kg >2700 mg/kg 4479 ppm
Light Naphtha >2000 mg/kg >2000 mg/kg >5000 ppm
n-Hexane 25000 mg/kg No data 48000 ppm
Eye Effects
Causes severe irritiation.
Skin Effects
Causes irritiation and possible allergic skin reaction (from defatting and drying of the skin).
Acute Inhalation Effects
Causes throat and respiratory tract irritation.
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for individual
ingredients are summarized below.
Ingredient(s) - Toxicological Data
hexane
LD50 (oral, 14-day old rat): 15840 mg/kg
LC50 (male rat): 38500 ppm (4-hour exposure)
methyl acetate
LD50 (oral, rat): greater than 5000 mg/kg
LD50 (skin, rabbit): greater than 5000 mg/kg
LC50 (rat): 16000 ppm (4-hour exposure)
12. Ecological Information
Ecotoxicological Information
This product contains components that will normally float on water. These components may be harmful to aquatic
organisms and may cause long term adverse effects in the aquatic environment.
Toxicity - Aquatic And Terrestrial Plants
Contains components that are potentially toxic to freshwater and saltwater ecosystems.
Environmental Fate Information
Contains components with the potential to bio-accumulate.
No specific information available.
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Ground UN1133, Adhesives, 3, PGII
IMDG UN1133, Adhesives, 3, PGII
IATA UN1133, Adhesives, 3, PGII
MATERIAL SAFETY DATA SHEET
Page 6 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
15. Regulatory Information
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
Ingredient(s) - U.S. Regulatory Information
hexane
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
State Regulations
Warning! May contain trace amounts of chemicals know to the state of California to cause cancer and/or reproductive
harm.
Ingredient(s) - State Regulations
HEPTANE
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
hexane
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
methyl acetate
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
Canadian Regulatory Information
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR. WHMIS Classification: B2 - Flammable Liquid, D2B - Toxic.
Ingredient(s) - Canadian Regulatory Information
hexane
WHMIS - Ingredient Disclosure List
WHMIS - Canada (Pictograms)
MATERIAL SAFETY DATA SHEET
Page 7 of 7
HE574 - BLUESKIN LVC ADHESIVE HE574
NFPA HMIS
HEALTH *1
3
FLAMMABILITY 3
1 0
REACTIVITY 0
B
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
This MSDS Supersedes A Previous MSDS Dated: 10/06/2009
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties and
make no representations as to the accuracy or completeness of the information contained therein, and assume
no responsibility regarding the suitablility of this information for the user's intended purposes or for the
consequences of its use. Each individual should make a determination as to the suitability of the information
for their particular purposes(s).
HENRY COMPANY
Printed Using MSDS GeneratorTM 2000
|