Classified as Hazardous According to NOHSC Criteria
Classified as Dangerous Goods by the ADG Code
Irritating to eyes, skin and respiratory system
May cause sensitisation by skin contact
Description Solvent based polychloraprene contact adhesive
UN No 1133
Hazchem Code 3(Y)E
DG Class 3.1
Subsidiary Risk(s) None Allocated
Poisons S5
Packaging Group II
EPG None Allocated
CAS No None Allocated
3. COMPOSITION/ INFORMATION ON INGREDIENTS
Ingredient Formula CAS No Weight %
Toluene Not Available 108-88-3 10 - <30%
Acetone Not Available 67-64-1 10 - <30%
Aliphatic Hydrocarbon Solvent Not Available 110-54-3 10 - <30%
Non Hazardous Ingredients Not Available Not Available 10 - <30%
4. FIRST AID MEASURES
Eye Immediately hold eyes open and flush continuously for at least 15
minutes with fresh running water.
Ensure irrigation under eyelids by occasionally lifting upper & lower
eyelid.
Transport to doctor or hospital without delay.
Skin Immediately flush skin with plenty of water (warm & soapy if
available) for at least 15 minutes while removing contaminated
clothing and shoes.
Inhaled If affected, remove to fresh air. If not breathing apply resuscitation.
Transport to doctor or hospital without delay.
Ingestion If conscious give water to drink do not induce vomiting unless
directed by doctor. Call a doctor immediately.
Advice to Doctor Treat Symptomatically & contact the poisons information centre on
131 126
5. FIRE FIGHTING MEASURES
Flash Point < -30篊
Auto-ignition Temperature Not determined
Lower Explosive Limit Not determined
Upper Explosive Limit Not determined
Suitable Extinguishing Media Carbon dioxide, dry chemical powder, water spray or fog.
Hazards from Combustion Use of water spray may cause water contamination and will generate
carbon dioxide which is a fire hazard in closed containers or confined
spaces.
Heating may cause expansion or decomposition leading to explosion
of container.
Combustion may emit toxic fumes.
Protective Precautions & Wear full body protective clothing with breathing apparatus.
Equipment for Fire Fighters Use water delivered as fine spray to control fire and cool adjacent
area.
Avoid spraying water onto pools of liquid.
Do not approach container suspected to be hot.
Cool fire exposed containers with water spray from a protected
location.
If safe to do so, remove container from path of fire.
Hazchem Code None Allocated
6. ACCIDENTAL RELEASE MEASURES
Evacuate personnel
Wear full body protective clothing with self contained breathing apparatus
Take all steps necessary to prevent spillage from entering drains or waterways
Keep away from, and close off all sources of ignition
Increase ventilation
Contain and absorb spill with sand, earth, insert material or vermiculite
Collect solid residues and seal in drums for disposal. Wash spill area with detergent and water
Do not use water or neutralising agent indiscriminately on large spills
Do not seal or stopper drums but allow to stand outdoors for 48 hours with bung removed
Dispose of waste and empty containers in accordance with federal state and local laws
7. STORAGE AND HANDLING
STORAGE Store in a cool, dry well ventilated area away from foodstuffs
Keep only in original container
HANDLING Wear gloves, overalls and eye protection
Do not eat, drink or smoke in the workplace
If ventilation is inadequate, wear suitable respiratory protection.
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
Respiratory Protection When exposed to vapours or mists, a respiratory protection program
meeting Australian and New Zealand Standards AS/NZS-1715
requirements must be followed whenever workplace conditions
warrant use of a respirator.
Use organic vapour cartridge. None required if airborne
concentrations are maintained below the exposure limit listed in the
Exposure Limit Information.
Product contains quantities of hydrocarbon solvents, which may
cause discomfort in confined spaces, or other poorly ventilated areas
during handling and use.
Eye and Hand Protection Avoid contact with skin and eyes.
Wear chemical splash goggles (AS/NZS-1337) and or approved
equivalent. Eye protection worn must be compatible with respiratory
system employed.
Wear chemical resistant gloves and footwear.
Always work in well ventilated areas.
Flammability Highly-flammable liquid containing extremely volatile solvents.
Content will burn in the presence of an ignition source. Vapours can
travel great distances to potential ignition source.
Engineering Controls Adequate ventilation should be provided in work area. A local
(Ventilation) exhaust ventilation system may be required to maintain exposure
levels below exposure limit concentrations. Refer to Australian
Standard AS-1668.
9. PHYSICAL DESCRIPTION/ PROPERTIES
Appearance Yellow liquid with hydrocarbon & keytones solvent odours
Boiling Point 56.5癈 - 111癈
Vapour Pressure 18.5mm of Hg at 20癈
Specific Gravity Approximately 0.82
Flash Point <-30癈
Flammable Limits LEL: 2.62% UEL: 13%
Vapour Density (air = 1) Not Available
Solubility in Water Slightly Soluble
10. STABILITY AND REACTIVITY
Hazardous Reactions Non known. However due to the highly flammable nature of this
product avoid all sparks and flames.
11. TOXICOLOGICAL INFORMATION
Skin Prolonged or repeated exposure may cause skin irritation and in cases
lead to dermatitis
Eye May cause slight eye irritation. Corneal injury is unlikely
Respiratory At room temperature, vapours are minimal due to low vapour
pressure, although certain operations may generate vapour or aerosol
concentrations sufficient to cause adverse effects
Swallowed Material considered to be harmful if swallowed
12. ECOLOGICAL INFORMATION
Eco-toxicological Effect Material may be hazardous to the environment
Do not discharge to drain or water ways
13. DISPOSAL CONSIDERATIONS
Dispose of empty containers in accordance with federal, state and local laws.
14. TRANSPORT INFORMATION
Classified as 6.1(b) Harmful Substance according to the Australian Code for Transport of Dangerous
Goods By Road and Rail (Edition 6, Section 1).
15. REGULATORY INFORMATION
The material is labelled in accordance with State Poisons Regulations.
16. OTHER INFORMATION
The advice and information contained herein is based on the original raw materials supplier's information. We believe the
information to be accurate and reliable as at the date supplied, but no representation , guarantee or warranty, expressed or implied,
is made to the accuracy, reliability, or completeness of the advice and information.
We urge persons receiving this advice and information to make their own determination as to the advice and information suitability
and the completeness for their own particular situation.