MATERIAL SAFETY DATA SHEET
Page 1 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
1. Product And Company Identification
Manufacturer Manufacturer Emergency Contacts & Phone Number
HENRY COMPANY CHEMTREC: (800) 424-9300
909 N. Sepulveda Blvd., Suite 650 CHEMTREC: (703) 527-3887
El Segundo, CA 90245-2724 CANUTEC: (613) 996-6666
Company Contact: Technical Services
Telephone Number: (800) 486-1278
Web Site: www.henry.com www.bakor.com
Issue Date: 05/10/2008
Supersedes MSDS Dated: 05/12/2006
Product Name: BK93038 - BAKOR 930-38 TACK SHEET PRIMER
Product Code: BK93038
Product/Material Uses
Adhesive for low density glass insulation to metal
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
isopropanol 67-63-0 0.1 - 1
perchloroethylene 127-18-4 0.1 - 1
toluene 108-88-3 0.1 - 1
trichloroethylene 79-01-6 60 - 100
xylene 1330-20-7 0.1 - 1
ZZZZZ Inert Ingredients
EMERGENCY OVERVIEW
CAUTION! Vapor may cause light-headedness, headache, nausea, drowsiness, loss of coordination and
respiratory tract irritation. Central nervous system depressant. Causes irritation to the eyes, skin and
respiratory tract.
Appearance/Odor: Blue liquid with chlorinated solvent odor
3. Hazards Identification
Primary Routes(s) Of Entry
Inhalation
Eye Hazards
May cause irritation (burning, tearing, redness or swelling).
Skin Hazards
May cause skin irritation, defatting and dermatitis upon prolonged contact.
Ingestion Hazards
May be harmful if swallowed. May cause gastric distress, vomiting and diarrhea.
Inhalation Hazards
Exposure to vapors may cause respiratory tract irritation. Inhalation of vapors or mists may cause central nervous
system depression, dizziness, fatigue, nausea, alcohol-like intoxication, and unconsciousness.
MATERIAL SAFETY DATA SHEET
Page 2 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 20 minutes. Get
medical attention.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water. Get medical attention immediately
if irritation develops and persists.
Ingestion
Get medical attention immediately. DO NOT INDUCE VOMITING. Never give anything by mouth to an unconscious
victim. Call a physician or poison control center immediately.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. If not breathing, give
artificial respiration. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: not available 癋 not available 癈
Flammability Class: not flammable
Lower Explosive Limit: 8
Upper Explosive Limit: 52.0
Fire And Explosion Hazards
During a fire, irritating and highly toxic gases may be generated, inlcuding phosgene, hydrogen chloride, and chlorine.
Extinguishing Media
Chemical foam, carbon dioxide (CO2), dry chemical.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose of in accordance with
applicable regulations. Avoid runoff to waterways and sewers.
7. Handling And Storage
Handling And Storage Precautions
Store in a cool, dry, well-ventilated area. Keep away from ignition sources. Use only with adequate ventilation. Do not
store near incompatible materials.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. When used outdoors, stay well away from building air intakes
or close and seal the intakes to prevent product from entering building.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Use with chemical-protective gloves (solvent-resistant) to prevent skin contact.
Respiratory Protection
Airborne exposures to hazardous vapors or mists may be generated by spraying or use in confined spaces.
MATERIAL SAFETY DATA SHEET
Page 3 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection - Continued
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health or safety
professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
perchloroethylene
ACGIH TLV-STEL 100 ppm
ACGIH TLV-TWA 25 ppm
OSHA PEL-CEILING 200 ppm
OSHA PEL-PEAK 300 ppm
OSHA PEL-TWA 100 ppm
toluene
ACGIH TLV-TWA 20 ppm
OSHA PEL-CEILING 300 ppm
OSHA PEL-PEAK 500 ppm
OSHA PEL-TWA 200 ppm
trichloroethylene
ACGIH TLV-TWA 10 ppm
ACGIH TLV-STEL 25 ppm
OSHA PEL-TWA 50 ppm
OSHA STEL-TWA 200 ppm
xylene
ACGIH TLV-STEL 150 ppm
ACGIH TLV-TWA 100 ppm
OSHA PEL-TWA 100 ppm
9. Physical And Chemical Properties
Appearance
Blue liquid
Odor
Chlorinated solvent odor
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: approximately 187 癋 approximately 86 癈
Specific Gravity: 1.3-1.4
Percent Volatiles: 67-73% < 1000 g/L
Vapor Pressure: 58 mmHg@20 癈
Vapor Density: 4.54
pH Factor: not applicable
Solubility: insoluble
Evaporation Rate: approximately 3
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Not expected to occur
Conditions To Avoid (Stability)
Keep away from ignition sources, heat, sparks and flames.
MATERIAL SAFETY DATA SHEET
Page 4 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
10. Stability And Reactivity - Continued
Incompatible Materials
Avoid contact with strong acids, strong bases, strong oxidizers, chemically active metals, copper, aluminum powder,
aluminum chloride, potassium nitrate, and strong reducing agents.
Hazardous Decomposition Products
Decomposition will not occur if handled and stored properly.
11. Toxicological Information
Chronic/Carcinogenicity
Perchloroethylene is present in this product at concentrations equal to or greater than 0.1%, and has been determined
to be carcinogenic as follows: IARC: Group 2A NTP: listed, and ACGIH: A3
Trichloroethylene is present in this product at concentrations equal to or greater than 0.1%, and has been determined to
be carcinogenic as follows: IARC: Group 2A NTP: listed, and ACGIH: A2
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for individual
ingredients are summarized below.
Ingredient(s) - Carcinogenicity
perchloroethylene
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
Ingredient(s) - Toxicological Data
isopropanol
LD50 (oral, rat): 5000 mg/kg
LC50: 22600 ppm (4-hours)
perchloroethylene
LD50 (oral, rat): 8850 mg/kg
LC50: 5200 ppm (4-hour exposure)
toluene
LD50 (oral, rat): 2600-7500 mg/kg
LC50 (rat) : 7350 ppm (4-hour exposure)
LD50 (dermal, rabbit): 12225 mg/kg
xylene
LD50 (oral, rat): 5400 mg/kg
LD50 (dermal, rabbit): 12180 mg/kg
LC50 (rat): 6350 ppm (4-hour exposure)
12. Ecological Information
None identified.
13. Disposal Considerations
Do not allow into any sewer, on the ground, or into any body of water. Dispose in accordance with applicable federal,
state and local government regulations.
MATERIAL SAFETY DATA SHEET
Page 5 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
14. Transport Information
Ground or Water (Domestic Voyage)
If shipped in containers < 4 L (1.06 gallons)
USA Consumer Commodity, ORM-D
Canada Ltd. Qty.
If shipped in containers >4 L. (1.06 gallons)
Both UN2810, Toxic liquid, organic n.o.s., (Trichloroethylene mixture), 6.1, III
IMDG UN2810, Toxic liquid, organic n.o.s., (Trichloroethylene mixture), 6.1, III
IATA UN2810, Toxic liquid, organic n.o.s., (Trichloroethylene mixture), 6.1, III
TDG - Canada (Pictograms)
15. Regulatory Information
Ingredient(s) - U.S. Regulatory Information
perchloroethylene
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
toluene
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
xylene
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
perchloroethylene
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
toluene
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
xylene
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
MATERIAL SAFETY DATA SHEET
Page 6 of 6
BK93038 - BAKOR 930-38 TACK SHEET PRIMER
15. Regulatory Information - Continued
Ingredient(s) - State Regulations - Continued
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
Canadian Regulatory Information
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR. WHMIS Classification: Class D, Div 1 - Poisonous or Infectious Material: immediate
and serious toxic effects, Class D, Div 2, Subdivision A - Materials Causing Other Toxic Effects. Very Toxic Material at
greater than or equal to 0.1%
Ingredient(s) - Canadian Regulatory Information
isopropanol
WHMIS - Ingredient Disclosure List
perchloroethylene
WHMIS - Ingredient Disclosure List
toluene
WHMIS - Ingredient Disclosure List
trichloroethylene
WHMIS - Ingredient Disclosure List
WHMIS - Canada (Pictograms)
NFPA HMIS
HEALTH 1
3
FLAMMABILITY 3
1 0
REACTIVITY 0
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
This MSDS Supersedes A Previous MSDS Dated: 05/12/2006
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties and
make no representations as to the accuracy or completeness of the information contained therein, and
assume no responsibility regarding the suitablility of this information for the user's intended purposes or for
the consequences of its use. Each individual should make a determination as to the suitability of the
information for their particular purposes(s).
Printed Using MSDS GeneratorTM 2000
|