MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 1
Material Safety Data Sheet
INGREDIENTS CAS # VAPOR EXPOSURE
SECTION 1. Identification of the substance/preparation and of the
PRESSURE LIMITS
company/undertaking
A 150.0 ppm
O 150.0 ppm
Calcium carbonate
471-34-1 None A 10.0 mg/m3
Manufacturer: E.I. du Pont de Nemours & Co.
O 15.0 mg/m3
DuPont Performance Coatings
Total Dust
Wilmington, DE, 19898
O 5.0 mg/m3
Respirable Dust
Telephone: Product information: (800) 441-7515
Carbon black
Medical emergency: (800) 441-3637
1333-86-4 None A 3.5 mg/m3
Transportation emergency: (800) 424-9300
O 3.5 mg/m3
(CHEMTREC)
D 0.5 mg/m3
8 & 12 hour TWA
Product:
Nason Aerosols Carbon dioxide
R
838.0@70.0 F A 5000.0 ppm
124-38-9
DOT Shipping Name: See DOT Addendum. O 5000.0 ppm
Cyclohexane, methyl-
Hazardous Materials Information: See Section 10. 108-87-2 None A 400.0 ppm
O 400.0 ppm
Dioctyl phthalate
117-81-7 0.0 A 5.0 mg/m3
Copyright 2007 E. I. duPont de Nemours and Company. All rights
D 1.0 mg/m3
reserved. Copies may be made only for those using DuPont products.
8 & 12 hour TWA
O None
Epoxy resin
SECTION 2. Composition/information on ingredients
25068-38-6 None A None
O None
Ethyl 3-ethoxy propionate
INGREDIENTS CAS # VAPOR EXPOSURE 1.1@25.0 C
763-69-9 A None
PRESSURE LIMITS O None
1,1-difluoroethane Ethyl alcohol
87.0@25.0 C A None
75-37-6 64-17-5 48.0 A 1000.0 ppm
O None O 1000.0 ppm
2-propoxyethanol D 1000.0 ppm
1.3@25.0 C
2807-30-9 S 60.0 ppm 8 & 12 hour TWA
15 min STEL Ethylbenzene
Skin 100-41-4 7.0 A 125.0 ppm
S 20.0 ppm 15 min STEL
Skin A 100.0 ppm
A None O 100.0 ppm
O None D 25.0 ppm
Acetone 8 & 12 hour TWA
247.0@68.0 F A 750.0 ppm
67-64-1 Ethylene glycol monobutyl ether
15 min STEL 111-76-2 0.6 A 20.0 ppm
A 500.0 ppm O 50.0 ppm
O 1000.0 ppm Skin
D 500.0 ppm D 5.0 ppm
8 & 12 hour TWA Skin
Acetyl tributyl citrate D 5.0 ppm
0.8@170.0 C A None
77-90-7 Heptane
O None 45.0@66.0 F
142-82-5 A 500.0 ppm
Acrylic resin 15 min STEL
NotAvail 22.0 A None A 400.0 ppm
O None O 500.0 ppm
Amorphous silica Hydrous magnesium silicate
7631-86-9 None A 10.0 mg/m3 14807-96-6 None A 2.0 mg/m3
Total Dust Respirable Dust
O 20.0 mppcf D 0.5 mg/m3
D 3.0 mg/m3 8 & 12 hour TWA
Asphalt, bitumen Respirable Dust
8052-42-4 1.0 A 0.5 mg/m3 D 0.1 mg/m3
O None 8 & 12 hour TWA
Butane O None
106-97-8 999.9 A 1000.0 ppm
O None
Butyl acetate
123-86-4 10.0 A 200.0 ppm
15 min STEL
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 2
Material Safety Data Sheet
INGREDIENTS CAS # VAPOR EXPOSURE INGREDIENTS CAS # VAPOR EXPOSURE
PRESSURE LIMITS PRESSURE LIMITS
Iron oxide Skin
1309-37-1 None A 5.0 mg/m3 O 500.0 ppm
Respirable Dust D 25.0 ppm
O 10.0 mg/m3 8 & 12 hour TWA
D 3.0 mg/m3 Skin
Isobutyl acetate Nitrocellulose solution
110-19-0 16.6 A 150.0 ppm 9004-70-0 None A None
O 150.0 ppm O None
Kaolin Polyvinyl butyraldehyde
1332-58-7 None A 2.0 mg/m3 63148-65-2 None A None
Respirable Dust O None
O 15.0 mg/m3 Propane
109.7@70.0 F A None
TWA 74-98-6
Total Dust O None
O 5.0 mg/m3 Propylene glycol monomethyl ether acetate
TWA 108-65-6 3.8 D 10.0 ppm
Respirable Dust 8 & 12 hour TWA
Limestone (calcium carbonate) A None
1317-65-3 None A 10.0 mg/m3 O None
O 15.0 mg/m3 Quartz-crystalline silica
Total Dust 14808-60-7 None A 25.0 ug/m3
O 5.0 mg/m3 Respirable Dust
Respirable Dust O 0.3 mg/m3
Liquified compressed gas Total Dust
68476-85-7 120.3 A 1000.0 ppm O 0.1 mg/m3
O 1000.0 ppm Respirable Dust
Liquified petroleum gas D 0.1 mg/m3
68476-86-8 None A None Respirable Dust
O None Styrene-alphamethylstyrene resin
Magnesium aluminum silicate 9011-11-4 None A None
8031-18-3 None A 10.0 mg/m3 O None
O 5.0 mg/m3 Sucrose acetate isobutyl resin
Respirable Dust 27216-37-1 53.2 A None
O 15.0 mg/m3 O None
D 1.0 mg/m3 Titanium dioxide
D 0.5 mg/m3 13463-67-7 None A 10.0 mg/m3
12 hr TWA O 15.0 mg/m3
Medium mineral spirits Total Dust
0.3@68.0 F
64742-88-7 D 50.0 ppm D 10.0 mg/m3
8 & 12 hour TWA Total Dust
A None D 5.0 mg/m3
O None Respirable Dust
Methyl ethyl ketone Toluene
78-93-3 71.2 A 300.0 ppm 108-88-3 22.0 A 20.0 ppm
15 min STEL
A 200.0 ppm O 300.0 ppm
O 200.0 ppm CEIL
D 300.0 ppm O 500.0 ppm
15 min TWA 10 min TWA
D 200.0 ppm O 200.0 ppm
8 & 12 hour TWA D 50.0 ppm
Methyl isobutyl ketone 8 & 12 hour TWA
108-10-1 15.1 A 75.0 ppm Vm&p naphtha
17.9@68.0 F
15 min STEL 8032-32-4 A 300.0 ppm
A 50.0 ppm D 100.0 ppm
O 100.0 ppm O None
N-butyl alcohol Water
5.6@68.0 F
71-36-3 A 20.0 ppm 7732-18-5 23.6 A None
O 100.0 ppm O None
D 50.0 ppm Xylene
8.0@25.0 C
15 min TWA 1330-20-7 A 150.0 ppm
D 25.0 ppm 15 min STEL
N-hexane A 100.0 ppm
180.0@25.0 C A 50.0 ppm
110-54-3
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 3
Material Safety Data Sheet
INGREDIENTS CAS # VAPOR EXPOSURE eyes, kidneys, liver, respiratory system, skin.
PRESSURE LIMITS
O 100.0 ppm Acetyl tributyl citrate
D 150.0 ppm Ingestion may cause any of the following: burns to mouth and stomach.
15 min STEL Skin contact may cause any of the following: irritation. Eye contact may
D 100.0 ppm cause any of the following: irritation, corneal injury, burning sensation.
8 & 12 hour TWA Inhalation may cause any of the following: respiratory tract irritation.
Zinc phosphate
7779-90-0 None O 5.0 mg/m3 Asphalt, bitumen
Respirable Dust WARNING: This chemical is known to the State of California to cause
A None cancer and birth defects or other reproductive harm
Zinc stearate
557-05-1 None A 10.0 mg/m3 Butane
Total Dust Increased susceptibility to the effects of this material may be observed in
O 15.0 mg/m3 people with preexisting disease of any of the following: cardiovascular
Total Dust system. Eye contact may cause any of the following: swelling, reversible
O 5.0 mg/m3 eye injury. This gas is a simple asphyxiant, which at high concentrations
Respirable Dust can reduce the amount of oxygen available for breathing.
Butyl acetate
*A=ACGIH, O=OSHA, D=DuPont, S=Suppliers. Limits are 8 hour TWA May cause abnormal liver function. The following medical conditions may
unless otherwise specified. Vapor pressure @ 20 C unless be aggravated by exposure: respiratory system. Tests for embryotoxic
otherwise noted. activity in animals has been inconclusive. Rats exposed to very high
airborne levels have exhibited high frequency hearing deficits. The
significance of this to man is unknown. Has been toxic to the fetus in
laboratory animals at doses that are toxic to the mother.
SECTION 3. Hazards identification
Carbon black
Is an IARC, NTP or OSHA carcinogen. Has shown carcinogenic activity in
Potential Health Effects:
laboratory animals at high doses. Significance to man is unknown. The
Inhalation:
following medical conditions may be aggravated by exposure: asthma,
May cause nose and throat irritation. May cause nervous system
respiratory disease.
depression, characterized by the following progressive steps: headache,
WARNING: This chemical is known to the State of California to cause
dizziness, nausea, staggering gait, confusion, unconsciousness. Reports
cancer.
have associated repeated and prolonged overexposure to solvents with
permanent brain and nervous system damage. If this product contains or
Dioctyl phthalate
is mixed with an isocyanate activator/hardener, the following health effects
Cancer hazard based on tests with laboratory animals. Overexposure may
may apply: Exposure to isocyanates may cause respiratory sensitization.
create cancer risk Tests in animals demonstrate reproductive toxicity.
This effect may be permanent. Symptoms include an asthma-like reaction
WARNING: This chemical is known to the State of California to cause
with shortness of breath, wheezing, cough or permanent lung
cancer and birth defects or other reproductive harm
sensitization. This effect may be delayed for several hours after exposure.
Repeated overexposure to isocyanates may cause a decrease in lung
Epoxy resin
function, which may be permanent. Individuals with lung or breathing
The following medical conditions may be aggravated by exposure: skin
problems or prior reactions to isocyanates must not be exposed to vapors
disorders. Vapor may be irritating at elevated temperatures. Repeated or
or spray mist of this product.
prolonged skin contact may cause any of the following: allergic skin rash.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Ethyl alcohol
The following medical conditions may be aggravated by exposure: liver
Ingestion:
disease. Tests in some laboratory animals indicate this compound may
May result in gastrointestinal distress.
have embryotoxic activity. Tests in animals demonstrate reproductive
toxicity. Ingestion may cause any of the following: stupor (central nervous
Skin or eye contact: system depression), gastrointestinal irritation. If absorbed through the skin,
May cause irritation or burning of the eyes. Repeated or prolonged liquid may be: harmful.
contact may cause skin irritation with discomfort and dermatitis.
Ethylbenzene
Is an IARC, NTP or OSHA carcinogen. Increased susceptibility to the
Other Potential Health Effects in addition to those listed above:
effects of this material may be observed in people with preexisting disease
1,1-difluoroethane
of any of the following: central nervous system, kidneys, liver, lungs.
Skin or eye contact with cold gas, or liquid or solid material may cause
Recurrent overexposure may result in liver and kidney injury. Studies in
severe frostbite. This gas is a simple asphyxiant, which at high
laboratory animals have shown reproductive, embryotoxic and
concentrations can reduce the amount of oxygen available for breathing.
developmental effects.
WARNING: This chemical is known to the State of California to cause
2-propoxyethanol
cancer.
May destroy red blood cells. Tests in laboratory animals have shown that
overexposure can have effects on any of the following organs/systems:
Ethylene glycol monobutyl ether
kidneys. Has been toxic to the fetus in laboratory animals at doses that are
Increased susceptibility to the effects of this material may be observed in
toxic to the mother. The following medical conditions may be aggravated by
people with preexisting disease of any of the following: bone marrow,
overexposure: asthma, dermatitis, pulmonary conditions.
central nervous system, eyes, gastrointestinal system, kidneys, liver,
respiratory system, skin. May cause injury to the kidneys, liver, blood
Acetone
and/or bone marrow. Repeated overexposure may result in damage to the
The following medical conditions may be aggravated by exposure: lung
blood. Eye contact may cause corneal injury. Has been toxic to the fetus in
disease, eye disorders, skin disorders. Overexposure may cause damage
laboratory animals at doses that are toxic to the mother. If absorbed
to any of the following organs/systems: blood, central nervous system,
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 4
Material Safety Data Sheet
through the skin, may be: harmful. May cause abnormal kidney function. Can be absorbed through the skin in
harmful amounts. N-hexane can produce peripheral polyneuropathy, a
Heptane progressive disorder of the nervous system, such as muscular weakness
Increased susceptibility to the effects of this material may be observed in and a loss of feeling in the extremities. With repeated high exposure,
people with preexisting disease of any of the following: central nervous effects may become irreversible. Harmful if inhaled. Harmful or fatal if
system, respiratory system, skin. May cause central nervous system swallowed.
effects such as dizziness, headache, nausea, and loss of consciousness.
Laboratory studies with rats have shown that petroleum distillates can Nitrocellulose solution
cause kidney damage and kidney or liver tumors. These effects were not Ingestion may cause any of the following: abdominal discomfort. Inhalation
seen in similar studies with guinea pigs, dogs, or monkeys. Several studies may cause any of the following: irritation. Skin or eye contact may cause
evaluating petroleum workers have not shown a significant increase of any of the following: irritation.
kidney damage or an increase in kidney or liver tumors. Aspiration may
occur during swallowing or vomiting, resulting in lung damage. Propane
Skin or eye contact with cold gas, or liquid or solid material may cause
Isobutyl acetate severe frostbite. This gas is a simple asphyxiant, which at high
The following medical conditions may be aggravated by exposure: eye concentrations can reduce the amount of oxygen available for breathing.
disorders, skin disorders, respiratory disorders.
Propylene glycol monomethyl ether acetate
Kaolin Recurrent overexposure may result in liver and kidney injury.
The following medical conditions may be aggravated by exposure: asthma,
dermatitis. Repeated or prolonged inhalation may cause any of the Quartz-crystalline silica
following: lung injury. Is an IARC, NTP or OSHA carcinogen. Repeated overexposure to
crystalline silica may lead to x-ray changes and chronic lung disease.
Liquified compressed gas Inhalation of high dust concentrations may cause: breathing difficulties,
May possibly cause modest initial irritation, followed in hours by severe lung injury.
shortness of breath, requiring prompt medical attention. May cause central WARNING: This chemical is known to the State of California to cause
nervous system effects such as temporary muscular weakness and loss of cancer.
cordination. Contact may cause skin burns. Can irritate or burn eyes.
Titanium dioxide
Liquified petroleum gas Is an IARC, NTP or OSHA carcinogen. In a lifetime inhalation test, lung
Ingestion may cause any of the following: aspiration leading to lung cancers were found in some rats exposed to 250 mg/m3 respirable
damage.. Eye contact may cause any of the following: irritation. Repeated titanium dust. Analysis of the titanium dioxide concentrations in the rat's
or prolonged inhalation of high vapor concentrations may cause: breathing lungs showed that the lung clearance mechanism was overwhelmed and
difficulties, dizziness, headache. Skin or eye contact with cold gas, or liquid that the results at the massive 250 mg/m3 level are not relevant to the
or solid material may cause severe frostbite. workplace.`Results of a DuPont epidemiology study showed that
employees who had been exposed to Titanium Dioxide were at no greater
Medium mineral spirits risk of developing lung cancer than were employees who had not been
Increased susceptibility to the effects of this material may be observed in exposed to Titanium dioxide. No pulmonary fibrosis was found in any of
people with preexisting disease of any of the following: central nervous the employees and no association was observed between Titanium dioxide
system, kidneys, liver, respiratory system, skin. This substance may cause exposure and chronic respiratory disease or x-ray abnormalities. Based on
damage to any of the following organs/systems: blood, central nervous the results of this study DuPont concludes that titanium dioxide will not
system, eyes, kidneys, liver, lungs, reproductive system, skin. Laboratory cause lung cancer or chronic respiratory disease in humans at
studies with rats have shown that petroleum distillates can cause kidney concentrations experienced in the workplace.`
damage and kidney or liver tumors. These effects were not seen in similar
studies with guinea pigs, dogs, or monkeys. Several studies evaluating Toluene
petroleum workers have not shown a significant increase of kidney Increased susceptibility to the effects of this material may be observed in
damage or an increase in kidney or liver tumors. people with preexisting disease of any of the following: central nervous
system, kidneys, liver, respiratory system, skin. Can be absorbed through
Methyl ethyl ketone the skin in harmful amounts. Recurrent overexposure may result in liver
Material is irritating to mucous membranes and upper respiratory tract. and kidney injury. High airborne levels have produced irregular heart beats
Increased susceptibility to the effects of this material may be observed in in animals and occasional palpitations in humans. Rats exposed to very
people with preexisting disease of any of the following: central nervous high airborne levels have exhibited high frequency hearing deficits. The
system, eyes, respiratory system, skin. Prolonged or repeated significance of this to man is unknown.
overexposure may cause any of the following: conjunctivitis, dermatitis. WARNING: This chemical is known to the State of California to cause birth
High concentrations have caused embryotoxic effects in laboratory defects or other reproductive harm.
animals. Aspiration may occur during swallowing or vomiting, resulting in
lung damage. Ingestion may cause headache, nausea, vomiting, Vm&p naphtha
dizziness, and drowsiness. Increased susceptibility to the effects of this material may be observed in
people with preexisting disease of any of the following: central nervous
Methyl isobutyl ketone system, kidneys, liver, lungs, respiratory system, skin. This substance may
The following medical conditions may be aggravated by exposure: asthma, cause damage to any of the following organs/systems: central nervous
respiratory disease, eye disorders, pulmonary conditions, skin disorders. system, kidneys, liver, lungs, skin and eyes. Material may be harmful or
Repeated or prolonged skin contact may cause any of the following: fatal if swallowed.
dryness, cracking of the skin, defatting. Inhalation may cause any of the
following: dizziness, stupor (central nervous system depression), Xylene
drowsiness, respiratory tract irritation. Increased susceptibility to the effects of this material may be observed in
people with preexisting disease of any of the following: bone marrow,
N-butyl alcohol cardiovascular system, central nervous system, kidneys, liver, lungs.
May cause abnormal blood forming function with anemia. Liquid splashes Recurrent overexposure may result in liver and kidney injury. High
in the eye may result in chemical burns. exposures may produce irregular heart beats. Canada classifies Xylene as
a developmental toxin as high exposures to xylenes in some animal
N-hexane studies have been reported to cause health effects on the developing
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 5
Material Safety Data Sheet
fetus/embryo. These effects were often at levels toxic to the adult animal. Ecological information:
The significance of these effects to humans is not known. Repeated or There is no data available on the product. The product should not be
prolonged skin contact may cause any of the following: irritation, dryness, allowed to enter drains, water courses or the soil.
cracking of the skin.
SECTION 7. Handling and storage
SECTION 4. First aid measures
First Aid Procedures:
Precautions to be taken in handling and storing:
Inhalation:
Observe label precautions. If combustible (flashpoint between 100 - 200
If affected by inhalation of vapor or spray mist, move to fresh air. If not
deg F), keep away from heat, sparks and flame. If flammable (flashpoint
breathing, give artificial respiration, preferably mouth-to-mouth. If breathing
less than 100 deg F), also keep away from static discharges and other
difficulty persists, or occurs later, consult a physician.
sources of ignition. If material is extremely flammable (flashpoint less than
20 deg F) or flammable, VAPORS MAY IGNITE EXPLOSIVELY OR
Ingestion: CAUSE FLASH FIRE, respectively. Vapors may spread long distances.
In the unlikely event of ingestion, DO NOT INDUCE VOMITING. Call a Prevent buildup of vapors. Close container after each use. Ground
physician immediately and have names of ingredients available. containers when pouring. Wash thoroughly after handling and before
eating or smoking. Do not store above 120 deg F. If product is waterbased,
Skin or eye contact: do not freeze.
In case of eye contact, immediately flush with plenty of water for at least 15 CONTENTS UNDER PRESSURE. Clean nozzle and cap container after
minutes; call a physician. In case of skin contact, wash thoroughly with each use. Do not puncture or incinerate (burn) container. Exposure to heat
soap and water. If irritation occurs, contact a physician. or prolonged exposure to sun may cause bursting.
Other precautions:
SECTION 5. Fire-fighting measures If material is a coating: do not sand, flame cut, braze or weld dry coating
without a NIOSH approved air purifying respirator with particulate filters or
appropriate ventilation, and gloves.
Flash Point (Closed Cup): See Section 11 for exact values.
Flammable Limits: LFL 0.5 % UFL 16.9 %
SECTION 8. Exposure controls / personal protection
Extinguishing Media:
Universal aqueous film-forming foam, carbon dioxide, dry chemical.
Fire Fighting Procedures:
Full protective equipment, including self-contained breathing apparatus, is
Engineering controls and work practices:
recommended. Water from fog nozzles may be used to prevent pressure
Ventilation:
build-up.
Provide sufficient ventilation in volume and pattern to keep contaminants
below applicable exposure limits.
Fire and Explosion Hazards:
For flammable liquids, vapor/air will ignite when an ignition source is
Respiratory protection:
present. In other cases, when heated above the flash point, emits
Do not breathe vapors or mists. If this product contains isocyanates or is
flammable vapors which, when mixed with air, can burn or be explosive.
used with an isocyanate activator/hardener, wear a positive-pressure,
Fine mists or sprays may be flammable at temperatures below the flash
supplied-air respirator (NIOSH approved TC-19C) while mixing
point.
activator/hardener with paint, during application and until all vapors and
spray mist are exhausted. If product does not contain or is not mixed with
an isocyanate activator/hardener, a properly fitted air-purifying respirator
SECTION 6. Accidental release measures with organic vapor cartridges (NIOSH TC-23C) and particulate filter
(NIOSH TC-84A) may be used. Follow respirator manufacturer s directions
for respirator use. Do not permit anyone without protection in the painting
Procedures for cleaning up spills or leaks: area. Individuals with history of lung or breathing problems or prior
Ventilate area. Remove sources of ignition. Prevent skin and eye contact reaction to isocyanates should not use or be exposed vapor or spray mist if
and breathing of vapor. If material does not contain or is not mixed with an product contains or is mixed with isocyanate activators/hardeners.
isocyanate activator/hardener: Wear a properly fitted air-purifying
respirator with organic vapor cartridges (NIOSH approved TC-23C), eye Protective equipment:
protection, gloves and protective clothing. Confine, remove with inert Personal protective equipment should be worn to prevent contact with
absorbent, and dispose of properly. If the material contains, or is mixed eyes, skin or clothing.
with an isocyanate activator/hardener: Wear a positive-pressure,
supplied-air respirator (NIOSH approved TC-19C), eye protection, gloves
Skin protection:
and protective clothing. Pour liquid decontamination solution over the spill
Neoprene gloves and coveralls are recommended.
and allow to sit at least 10 minutes. Typical decontamination solutions for
isocyanate containing materials are: 20% Surfactant (Tergitol TMN 10) and
80% Water OR 0-10% Ammonia, 2-5% Detergent and Water (balance). Eye protection:
Pressure can be generated. Do not seal waste containers for 48 hours to Desirable in all industrial situations. Goggles are preferred to prevent eye
allow C02 to vent. After 48 hours, material may be sealed and disposed of irritation. If safety glasses are substituted, include splash guard or side
properly. shields.
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 6
Material Safety Data Sheet
SECTION 9. Physical and chemical properties
SOLVENT DENSITY: 7.18 VOC LE: 5.5 VOC AP: 4.3
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Evaporation rate Slower than Ether
Water solubility NIL
402-10TM Acetone, Calcium carbonate, Dioctyl phthalate(1%*), Limestone
Vapour density Heavier than air
Approx. Boiling Range ( C) -42 - 343 C (calcium carbonate), Liquified compressed gas, Methyl ethyl ketone,
Approx. Freezing Range ( C) -189.7 - -93.8 C Methyl isobutyl ketone(4%*@), Nitrocellulose solution, Titanium
dioxide(4.8%), Toluene(15%*@)
Gallon Weight (lbs/gal) 6.13 - 9.53
GAL WT: 6.81 WT PCT SOLIDS: 20.00 VOL PCT SOLIDS: 8.04
Specific Gravity 0.73 - 1.14
SOLVENT DENSITY: 5.87 VOC LE: 4.7 VOC AP: 2.8
Percent Volatile By Volume 63.44 - 100.00
FLASH POINT: Below 20 F H: 2 F: 3 R: 3 OSHA STORAGE: IB
Percent Volatile By Weight 39.92 - 100.00
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Percent Solids By Volume 0.00 - 36.56
Percent Solids By Weight 0.00 - 60.08
402-11TM Acetone, Dioctyl phthalate(1%*), Limestone (calcium carbonate),
Liquified compressed gas, Methyl ethyl ketone, Methyl isobutyl
ketone(4%*@), Nitrocellulose solution, Titanium dioxide(7.7%),
SECTION 10. Stability and reactivity
Toluene(15%*@)
GAL WT: 6.79 WT PCT SOLIDS: 19.00 VOL PCT SOLIDS: 7.40
SOLVENT DENSITY: 5.89 VOC LE: 4.8 VOC AP: 2.8
Stability:
FLASH POINT: Below 20 F H: 2 F: 3 R: 3 OSHA STORAGE: IB
Stable
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Incompatibility (materials to avoid):
403-00TM Acetone, Acrylic resin, Butane, Ethylene glycol monobutyl
None reasonably foreseeable
ether(5%*), Liquified compressed gas, Styrene-alphamethylstyrene
resin(3%*), Toluene(24%*@)
Hazardous decomposition products: GAL WT: 6.13 WT PCT SOLIDS: 12.52 VOL PCT SOLIDS: 9.46
CO, C02, smoke, and oxides of any heavy metals that are reported in SOLVENT DENSITY: 5.92 VOC LE: 4.8 VOC AP: 3.3
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
"Composition, Information on Ingredients" section.
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Hazardous Polymerization:
421-24TM Acetone, Acrylic resin, Butane, Ethylbenzene(0.4%*@), Liquified
Will not occur.
compressed gas, Medium mineral spirits, Titanium dioxide(6.0%),
Toluene(16%*@), Xylene(1%*@), Zinc stearate(2%*)
Sensitivity to Static Discharge:
GAL WT: 6.34 WT PCT SOLIDS: 12.85 VOL PCT SOLIDS: 5.63
For flammable materials (flashpoint less than 100 deg F) and combustibles
SOLVENT DENSITY: 5.86 VOC LE: 4.8 VOC AP: 3.0
(flashpoint between 100-200 deg F) if heated above the flashpoint, solvent
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
vapors in air may explode if static grounding and bonding is not used
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
during transfer of this product.
421-25TM Acetone, Acrylic resin, Butane, Ethylbenzene(0.4%*@), Iron
Sensitivity to Mechanical Impact:
oxide, Liquified compressed gas, Medium mineral spirits,
None known.
Toluene(18%*@), Xylene(1%*@), Zinc stearate(3%*)
GAL WT: 6.19 WT PCT SOLIDS: 9.74 VOL PCT SOLIDS: 5.05
SOLVENT DENSITY: 5.88 VOC LE: 4.9 VOC AP: 2.9
SECTION 11. Additional Information
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
402-01TM 2-propoxyethanol(4%*@), Acetone, Acrylic resin, Butane,
421-26TM Acetone, Acrylic resin, Butane, Ethylbenzene(0.3%*@), Liquified
Carbon black(0.9%), Ethylbenzene(0.2%*@), Isobutyl acetate, Liquified
compressed gas, Medium mineral spirits, Titanium dioxide(6.0%),
compressed gas, Methyl isobutyl ketone(4%*@), Propylene glycol
Toluene(16%*@), Xylene(1%*@), Zinc stearate(2%*)
monomethyl ether acetate, Sucrose acetate isobutyl resin,
GAL WT: 6.36 WT PCT SOLIDS: 13.18 VOL PCT SOLIDS: 5.70
Toluene(16%*@)
SOLVENT DENSITY: 5.86 VOC LE: 4.8 VOC AP: 3.0
GAL WT: 6.25 WT PCT SOLIDS: 18.90 VOL PCT SOLIDS: 13.98
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
SOLVENT DENSITY: 5.89 VOC LE: 4.7 VOC AP: 3.7
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
441-37TM Acetone, Butyl acetate, Ethyl 3-ethoxy propionate,
Ethylbenzene(0.2%*@), Heptane, Propane, Toluene(3%*@)
402-02TM Acetone, Acetyl tributyl citrate, Acrylic resin, Amorphous silica,
GAL WT: 8.09 WT PCT SOLIDS: 0.00 VOL PCT SOLIDS: 0.00
Butane, Carbon black(0.4%), Ethylene glycol monobutyl ether(6%*),
SOLVENT DENSITY: 8.09 VOC LE: 5.3 VOC AP: 4.2
Isobutyl acetate, Propane, Propylene glycol monomethyl ether acetate,
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
Styrene-alphamethylstyrene resin(3%*), Toluene(13%*@), Vm&p naphtha
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
GAL WT: 7.32 WT PCT SOLIDS: 8.01 VOL PCT SOLIDS: 6.17
SOLVENT DENSITY: 7.18 VOC LE: 5.5 VOC AP: 4.3
481-20TM Ethyl alcohol, Ethylene glycol monobutyl ether(4%*), Liquified
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
petroleum gas, Water
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
GAL WT: 7.95 WT PCT SOLIDS: 0.07 VOL PCT SOLIDS: 0.06
SOLVENT DENSITY: 7.95 VOC LE: 5.9 VOC AP: 1.0
402-03TM Acetone, Acetyl tributyl citrate, Acrylic resin, Butane, Carbon
FLASH POINT: Below 20 F H: 0 F: 3 R: 0 OSHA STORAGE: IB
black(0.5%), Ethylene glycol monobutyl ether(6%*), Isobutyl acetate,
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Propane, Propylene glycol monomethyl ether acetate,
Styrene-alphamethylstyrene resin(3%*), Toluene(14%*@), Vm&p naphtha
481-75TM Carbon dioxide, Cyclohexane, methyl-, Heptane, Medium
GAL WT: 7.28 WT PCT SOLIDS: 7.34 VOL PCT SOLIDS: 6.02
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 28.6
DuPont Performance Coatings January 1, 2008
Nason Aerosols
R
Page: 7
Material Safety Data Sheet
mineral spirits, N-hexane(2%*@), Toluene(10%*@), Vm&p naphtha
GAL WT: 7.27 WT PCT SOLIDS: 0.00 VOL PCT SOLIDS: 0.00
SOLVENT DENSITY: 7.27 VOC LE: 7.3 VOC AP: 7.3
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IB
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
491-40TM Acetone, Butyl acetate, Epoxy resin, Ethylbenzene(0.6%*@),
Hydrous magnesium silicate, Liquified compressed gas, N-butyl
alcohol(12%*), Polyvinyl butyraldehyde, Propylene glycol monomethyl
ether acetate, Titanium dioxide(4.1%), Xylene(3%*@), Zinc
phosphate(2%*)
GAL WT: 6.62 WT PCT SOLIDS: 14.32 VOL PCT SOLIDS: 5.49
SOLVENT DENSITY: 6.00 VOC LE: 5.1 VOC AP: 3.3
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IB
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
492-01TM Asphalt, bitumen, Butane, Hydrous magnesium silicate, Kaolin,
Limestone (calcium carbonate), Liquified compressed gas,
Toluene(18%*@), Vm&p naphtha
GAL WT: 9.53 WT PCT SOLIDS: 60.08 VOL PCT SOLIDS: 36.56
SOLVENT DENSITY: 5.97 VOC LE: 3.8 VOC AP: 3.8
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IB
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
492-51TM 1,1-difluoroethane, Asphalt, bitumen, Carbon black(0.7%),
Kaolin, Limestone (calcium carbonate), Magnesium aluminum silicate,
Medium mineral spirits, N-hexane(13%*@), Quartz-crystalline silica(0.1%),
Toluene(13%*@)
GAL WT: 8.68 WT PCT SOLIDS: 42.51 VOL PCT SOLIDS: 25.53
SOLVENT DENSITY: 6.62 VOC LE: 4.3 VOC AP: 3.4
FLASH POINT: Below 20 F H: 2 F: 3 R: 0 OSHA STORAGE: IA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Footnotes:
TSCA: in compliance = In compliance with TSCA Inventory requirements
for commercial purposes.
ACGIH = American Conference of Governmental Industrial Hygienists.
IARC = International Agency for Research on Cancer.
NTP = National Toxicology Program.
OSHA = Occupational Safety and Health Administration.
PNOR = Particles not otherwise regulated.
PNOC = Particles not otherwise classified.
STEL = Short term exposure limit.
TWA = Time-weighted average.
TM = Is a Trademark of E.I. DuPont de Nemours Co.
* = Section 313 Supplier Notification: These chemicals are subject to the
reporting requirements of Section 313 of the Emergency planning and
Right-to-Know act of 1986 and of 40 CFR 372.
@ = Listed as a Clean Air Act Hazardous Air Pollutant.
# = EPCRA Section 302 - Extremely hazardous substances.
Notice:
The information on this Material Safety Data Sheet relates only to the
specific material designated herein and does not relate to use in
combination with any other material or in any process.
Product Manager: Refinish Sales
Prepared by: Y. B. Yarbrough
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
|