, 1"5.
1W~
!I8IY USia bneet
~~11
t'&ge:
~ ~~1i"'1Y -~,q
-- I
~
MATBRIAL SAFETY DATA SHEET
-
---
--
:7
-
~-
--
-
-
--
---
--
- CHEMICAL PRODUCTAND COMPANYIDENTIFICATION
I SECTION1
1
THIS MATERIAL SAFETY DATA SHEET IS AVAILABLE IN SPANISH UPON REQUEST.
1
PRODUCT NAME
Original Contact Cement
UPC NUMBER
00262, 00270, 00271, 00272
00277
00273, 00274
PRODUCT USE/CLASS Contact Adhesive
MANUFACTURER :
24 HOUR EMERGENCY:
DAP INC.
INFO TRAC: 1-800-535-5053
P.O. BOX 277
DAP INC.: 1-800-543-3840
DAY'I'ON, OH
.
45401-0277 MEDICAL: 1-800-327-3874
PREPARE DATE 05/06/96 GENERAL INFORMATION:
REVISION NO. 14 DAP INC.: 1-800-543-3840
REVISION DATE 02/01/97
- COMPOSI'l'ION/DlFORMA'l'ION
SECTION 2
ON INGREDImr;
1
--- WT/WT,
}.or- CHEMICAL NAME
~-.- CAS NUMBER RANGE
01 Toluene
108-88-3 45.0-50.0 ,
02 Aliphatic Petroleum Distillate
64742-89-8 20.0-25.0 ,
03 Methyl ethyl ketone
10.0-15.0 ,
78-93-3
EXPOSURE LIMITS
ACGIB OSHA
COMPANY
ITa TLV-TWA TLV-STEL PEL-'1WA PEL-CEILING TLV-TWA SKIN
01 50 PPIn. H.E. 100 ppm N.E. N.E. YES
02 400 ppm H.E. 400 ppm N.E. N.E. NO
03 200 ppm 300 ppm 200 ppm N.E. N.E. NO
(See Section 16 for abbreviation legend)
(Continued on Page 2)
Product Name: Original Contact Cement
Revision Date 02/01/97
Page ~
_.~
http://www.dap.com/products/msds/
adheslves/30503.html
t"ag8:
UAI' Malena) ~IiTety uata ~neet
uesaay. June 10. 1\11111
DANGER! Extremely flaImnable liquid and vapor. Vapor
EMERGENCY OVERVIEW:
~ful. Harmful or fatal if swallowed. Vapors may cause flash fire or
losion. Aspiration hazard if swallowed - can enter lungs and cause
aamage. Harmful if inhaled.
POTENTIAL HEALTH EFFECTS
-
EFFECTS OF OVEREXPOSURE EYE CONTACT: May cause eye irritation
OVEREXPOSURE - May irritate Prolonged
skin.
EFFECTS OF SKIN CONTACT:
or repeated contact can result in defatting and drying of the skin which
may result in skin irritation and dermatitis (rash).
-
EFFECTS OF OVEREXPOSURE INHALATION: Vapor harmful if inhaled. Vapor
may irritate nose and upper respiratory tract. Vapor inhalation may affect
the brain or nervous system causing dizziness, headache or nausea.
-
This material may be harmful or
EFFECTS OF OVEREXPOSURE INGESTION:
fatal if swallowed. Aspiration of material into the lungs due to vomiting
can cause chemical pneumonitis which can be fatal. If ingested, this
product may cause vomiting, diarrhea, and depressed respiration.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Reports have associated
permanent brain and nervous system damage with prolonged and repeated
occupational overexposure to solvents. Overexposure or misuse of toluene
can cause liver, kidney, and brain damage as well as cardiac abnormalities
Symptoms include: loss of memory, loss of intellectual ability, and loss
of coordination.
None known
IICAL CONDITIONS WHICH MAY BE AGGRAVATED BY CONTACT
SKIN CONTACT INHALATION
PRIMARY ROUTE ( S) OF ENTRY:
; , ,.,.-,..:.;.;..:
c
- FIRST AID MEASURES " "
SECTION 4
~ ~.,...,.,..~+~...~,;;;-~~~-
EYE CONTACT : Flush with large quantities of water until irritation
Contact a physician.
subsides.
Wash with
SKIN CONTACT soap and water
Remove to fresh air. If not breathing, give artificial
INHALATION:
If breathing is difficult, give oxygen. Contact a physician
respiration.
itmnediately.
INGESTION: DO NOT INDUCE VOMITING. If irritation or complications arise
contact a physician or Regional Poison Control Center immediately.
None
COMMENT S
,
(ContJ.nued on Page 3)
.
~
Product Name: Contact Cement ~~~~
original ~
Revision Date: 02/01/97 Page 3
~ SECTION 5 - FIRE FIGHTING MEASURES ':"--~~~~~~
'; ;"
~4..""';;~~ ;~:;.:
N .A
FLASH POINT: 21 F. minimum LOWER EXPLOSIVE LIMIT:
UPPER EXPLOSIVE LIMI~: N.A
(SETAFLASH CLOSED CUP)
http://www.dap.com/products/msds/
adhesives/30S03. html
~
.-.,.:~
UAt' Matenal ~rety usta ~neet
uesaay, June l:J, 1111111
N.E
AUTOIGNITION TEMPERATURE
FOAM
CO2 DRY CHEMICAL
EXTINGUISHING MEDIA
Extremely flammable. Material will
~SUAL FIRE AND EXPLOSION HAZARDS:
.dily ignite at room temperature. Vapors may form an explosive mixture
w~th air. Vapors can travel through a source of ignition and flashback.
Containers may explode if exposed to extreme heat. Eliminate sources of
ignition: heat, electrical equipment, sparks, and flames. Do not put in
contact with oxidizing or caustic materials.
Full protective equipment, including
SPECIAL FIREFIGHTING PROCEDURES:
self-contained breathing apparatus, is recommended to protect from
combustion products. Cool exposed containers with water.
-
: 6 ACCIDENTAL RELEASE MEASURES
c SECTION
~-.,;~
c04
~
c "
~~~~~~-~~~-
Dike spill area. Immediately eliminate sources
SPILL OR LEAK PROCEDURES:
of ignition. Use absorbent material or scrape up dried material and place
into containers.
- HANDLING
,0::\( 0", SECTION 7 AND STORAGE
KEEP OUT OF REACH OF CHILDREN. AvQidskin and eye
HANDLING INFORMATION:
Avoid breathing vapors. Use only in a well ventilated area.
contact.
STORAGE INFORMATION: Store away from caustics and oxidizers. Keep away
~m heat, spark, and flame. Keep containers tightly closed when not in
. Keep containers from excessive heat and freezing. Do not store at
~eratures above 120 degrees F.
h?deliberately
misuse concentrating and
OTHER PRECAUTIONS: Intentional
inhaling vapors may be harmful or fatal. Do not take internally.
Construction and repair activities can adversely affect indoor air
quality. Consult with the occupants or a representative(i.e. maintenance,
building manager, industrial hygienist, or safety officer) to determine
ways to minimize any impact.
(continued on Page 4)
Product Name: Original Contact Cement ~...,o;~+~;;;~"~~
Revision Date: 02/01/97 Page 4
-
'j SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION _
;;.;:;-~ ~..~;;;;~- ,
ENGINEERING CONTROLS: Provide sufficient mechanical ventilation (local or
general exhaust) to maintain exposure below PEL and TLV. Vapors are
heavier than air and will collect in low areas. Check all low areas
~sements, sumps, etc.) for vapors before entering.
RESPIRATORY PROTECTION: If 8 hour exposure limit or value is exceeded for
any component, use an approved NIOSH/OSHA respirator. Consult your safety
equipment supplier and the OSHA regulation, 29 CPR 1910.134 for respirator
http://www.dap.com/products/msds/
adhesives/3O503.html
UAt' Malenal :)8Tety uata :)neet ...age:
luesaay. June 10. 111W
requirements. A respiratory protection program that meets OSHA 1910.134 and
ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
~ PROTECTION: Goggles or safety glasses with side shields
Solvent impervious gloves
br..IN PROTECTION:
Provide eyewash and sol vent impervious apron
OTHER PROTECTIVE EQUIPMENT:
if body contact may occur.
Remove contaminated clothing and wash before reuse
HYGIENIC PRACTICES:
-
SECTION 9 PHYSI~ AND CHEMICAL PROPERTI~ ~:-f~~:~~
;::
~",,~~:4+~
~ ~
-
: 170 180 F VAPOR DENSITY : Is heavier than air
BOILING RANGE
: Hydrocarbon
ODOR
RATE Is faster than Butyl
: Tan Mobile LiquidEVAPORATION
APPEARANCE
Acetate
SOLUBILITY IN H2O : Negligible
: 0.8903
SPECIFIC GRAVITY
: 70 Imn Hg @ 68F.
VAPOR PRESSURE
: Liquid
PHYSICAL STATE
(See Section 16 for abbreviation legend) ~\
- STABILITY
SECTION
10 AND REACTIVm c"
; : ~~~.*;,;;~~~~~~-
Excessive heat and freezing
CONDITIONS 'l'O AVOID:
Strong oxidizers and caustiC4.
~MPATIBILITY:
i.e. cox,
decomposition products
Normal
HAZARDOUS DECOMPOSITION PRODUCTS:
NOX
Will not occur under normal conditions
HAZARDOUS POLYMERIZATION:
This product is .table under normal storage conditions
S'tA&ILITY:
(Continued on Page S}
Name: Original ~~act Cement
Product ~7"' "";'~~"'
'
Revision Date: 02/01/97 Page 5
r
C
-
"C:: SECTION 11 TOXICOLOGICAL PROPERTIES ; 'co :
No product or component toxicological information is available
SECTION 12 - ECOLOGICAL INFORMATION +~-~~~~-~
,C,(':
~_19
No Information
\ SECTION 13;;'c'DISPOSAL CONSIDERATIONS '~:,'~:i,
~~-~ ~-c4~_~~~~~~~
WASTEMANAGEMENT/DISPOSAL: Dispose of according to Federal, State, and
should be incinerated
Local Standards. Discarded material at a permitted
cabnot be disposed of in a landfill.
facility. Liquids Do not reuse empty
http://www.dap.com/products/msds/
adhesives/30503.html
I"age:o
UAt' M8tenal ~8Tety USta ~
uesoay. June l~. lYYY
container. State and Local regulations/restrictions are complex and may
differ from Federal regulations. Responsibility for proper waste disposal
is with the owner of the waste.
r'\ If discarded (40 CPR 261
WASTE CODE - DOO1-Ignitable
- TRANSPORTATION
SECTION 14 INFORMATION '
;;:
DOT PROPER SHIPPING NAME Adhesive (Consumer Commodity*)
3 (ORM-D*)
DOT HAZARD CLASS
UN 1133 (NONE* PACKING GROUP: III (NONE*)
DOT UNfNA NUMBER:
For containers of 1 gallon or less
- REGULATORY INFORMATION
:\'.,!:7~ SECTION 15 ,~,
C;i
F8DERAL REGULATIONS: AS FOLLOWS-
u.s
(29 CFR
OSHA: Hazardous by definition of Hazard Communication Standard
1910.1200)
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
' CHEMICAL NAME ,..;o.-~.-
,/
CAS NUMBER fWT % RANGE
'tiT
uene 45.0-50.0 %
108-88-3
78-93-3 10.0-15.0 %
Methyl ethyl ketone
6r
C,' (Continued on Page
Pro<;iu<:,t
Naae: Original Contact Cement
Date: 02/01/97 p.ge
RevJ;sJ;on 6,
-
SECTION 15 REGULATORY INFORMATION ': "
'
'---" ~"~-;;'-'--~";;~.
TOXIC SUBSTANCES CONTROL ACT:
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States
.. J.8 avaJ.NAME e.
CHEMICAL CAS NUMBER
. .1a hI ~~~.~~
f
N
0 J.n ormatJ.on
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
CHEMICAL ~T~~ ~
CAS NUMBER
~~-
~~~
Polychlorinated Rubber TSRN-618608-S001P
Polychlorinated Rubber TSRN-618608-S023~
PENNSYLVANIA RIGHT-TO- KNOW:
~ following non-hazardous ingredients are present in the product at
~ater than 3%:
CAS NUMBER
CHEMICAL NAME --~~~
-
Polychlorinated proprietary
Rubber
Phenolic resin proprietary
http://www.dap.com/products/msds/
adhesives/30503.html
t'age: Ii
UAI-' Malenal ~alely U8ta ~
luesoay, June 10, 1111111
CALIFORNIA PROPOSITION 65:
noted below and contained in this product, are
WARNING: The chemical(s)
r-1wn to the state of California to cause birth defects or other
'roductive harm:
'toluene '. CAS NUMBER
CHEMICAL NAME ~~...~
~
108-88-3
INTERNATIONAL REGULATIONS: AS FOLLOWS-
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
No information available
CANADIAN WHMIS CLASS
- OTHER INFORMATION
SECTION 16 'c
PREVIOUS MSDS REVISION DATE:O6fO5/96
'~~710
VOC less water, less exempt solvent gm/l(78~7.9~)
VOCmaterial: 700-710 gm/l
:'; (continued on Page 7)
~~
~duct Name: Original Contact Cement ~c'
,
Jvision Date: ~/Olf97 Page 7
I SECTION 16 OTHERINFORMATION
-
1
'\
~"'~--~-~
1 ~-~~
- AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL
ACGIH HYGIENISTS
LEGEND
N.A. - NOT APPLICABLE
-
N. E. NOT ESTABLISHED
-
PEL PERMISSIBLE EXPOSURE LIMIT
-
NTP NATIONAL TOXICOLOGY PROGRAM
-
SARA SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
-
STEL SHORT TERM EXPOSURE LIMIT
-
TLV THRESHOLD LIMIT VALUE(8 HR. TIME WEIGHTED AVERAGE OR TWA)
-
VOC VOLATILE ORGANIC COMPOUND
-
NJRTK NEW JERSEY RIGHT TO KNOW LAW
.. -
ND NOT DETERMINED
Supersedea ~W503
~ ~;.;
http://www.dap.com/products/msds/
adhesives/30503.html
"'8ge: {
UAt' M8tenal ~Tety uata ~neet
I~Y. JUne l~. lWII
This data is offered in good faith as typical values and not as a product
specification. No warranty either expressed or implied, is hereby made.
The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review the
recommendations in specific context of the intended use and determine if
they are appropriate.
< End OF MSDS >
http://www.dap.com/products/msds/
adhesives/30503.html
|