MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: MULTI-USE LACQUER THINNER
SYNONYMS: None.
PRODUCT CODE: 6801, 16801, VIRGIN
Lacquer thinner.
PRODUCT USE:
If this product is used in combination with other products, refer to the
Material Safety Data Sheet for those products.
24-HOUR EMERGENCY PHONE NUMBERS
These numbers are for MEDICAL: TRANSPORTATION (SPILL):
emergency use only. If
you desire non-emergency 1-800-752-7869 1-800-468-1760
product information,
please call a phone
number listed below.
SUPPLIER: Safety-Kleen Systems, Inc.
5400 Legacy Drive
Cluster II, Building 3
Plano, Texas 75024
USA
1-800-669-5740
www.Safety-Kleen.com
TECHNICAL INFORMATION: 1-800-669-5740 Press 1, then 1, then Enter 7500
MSDS FORM NUMBER: 82410 ISSUE: September 25, 2006
ORIGINAL ISSUE: July 20, 1989 SUPERSEDES: September 20, 2004
PREPARED BY: Product MSDS Coordinator APPROVED BY: MSDS Task Force
Revision 09/06; MSDS Form No. 82410 - Page 1 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
OSHA PEL** ACGIH TLV?br>
WT% NAME SYNONYM CAS NO. TWA STEL TWA STEL LDa LCb
ppm ppm ppm mg/kg
0-50* Toluene Methylbenzene 108-88-3 200 ppm 300 50 N. Av. 636 49
(ceiling) (skin) (14.1 g/m3/4H
c
mL/kg)
10-30 Acetone Dimethyl ketone 67-64-1 1000 ppm N. Av. 500 750 5800 50100
3
2400 mg/m mg/m3/8H
d d
0-35* Solvent naphtha N. Av. 64742-89-8 N. Av. N. Av. N. Av. 300 N. Av. N. Av.
(petroleum), light
aliphatic
2-15* Isopropyl alcohol Isopropanol 67-63-0 400 ppm N. Av. 200 400 5045 16000
3
980 mg/m (12800 ppm/8H
c
mg/kg)
5-10* Methyl ethyl ketone 2-Butanone 78-93-3 200 ppm N. Av. 200 300 2737 23500
3
590 mg/m (6480 mg/m3/8H
c
mg/kg)
e
0-10* Ethyl 3- Ethyl-3-ethoxy 763-69-9 N. Av. N. Av. N. Av. N. Av. 5000 (10 N. Av.
c
ethoxypropanoate propionate mL/kg)
0-10* Isobutyl acetate 2-Methylpropyl 110-19-0 150 ppm N. Av. 150 N. Av. 13400 N. Av.
3
ester acetic acid 700 mg/m (>17400
c
mg/kg)
2-5 Methyl isobutyl ketone 4-methyl-2- 108-10-1 100 ppm N. Av. 50 75 2080 N. Av.
3
pentanone 410 mg/m (>20
c
mL/kg)
0-5* Xylenes (o-, m-, p- Dimethylbenzene 1330-20-7 100 ppm N. Av. 100 150 4300 5000
3
isomers) 435 mg/m (>1700 ppm/4H
c
mg/kg)
0-5* Methyl alcohol Methanol 67-56-1 200 ppm N. Av. 200 250 5628 64000
3
260 mg/m (skin) (15800 ppm/4H
c
mg/kg)
* Even though the concentration range does not fall under the ranges prescribed by WHMIS, this is the actual range which varies with each
batch of the product.
**OSHA Final PEL value (enforceable). Some States have adopted more stringent values.
c e
N. Av. = Not Available Skin-Rabbit LD50 Manufacturer recommended: 50 ppm TWA
a d
Oral-Rat LD50 Based on VM & P Naphtha the TWA is 300 ppm and 100 ppm STEL
b
Inhalation-Rat LC50
Revision 09/06; MSDS Form No. 82410 - Page 2 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
APPEARANCE
Liquid, clear and colorless, solvent odor
DANGER!
PHYSICAL HAZARDS
Extremely flammable liquid and vapor.
Vapor may cause flash fire.
HEALTH HAZARDS
May be harmful if inhaled.
May be harmful if absorbed through the skin.
May be harmful or fatal if swallowed.
May be severely irritating to eyes. May cause damage and/or blindness.
May irritate the respiratory tract (nose, throat, and lungs) and skin.
Contains material which may cause birth defects.
Contains material which may cause eye, skin, heart, liver, kidney,
central nervous system, and brain damage.
ENVIRONMENTAL HAZARDS
Toxic to fish.
POTENTIAL HEALTH EFFECTS
High concentrations of vapor or mist may be harmful if inhaled. High
INHALATION
concentrations of methanol vapor or mist may cause blindness. High
(BREATHING):
concentrations of vapor or mist may irritate the respiratory tract (nose, throat,
and lungs). High concentrations of vapor or mist may cause nausea, vomiting,
headaches, dizziness, loss of coordination, numbness, and other central
nervous system effects. Massive acute overexposure may cause rapid central
nervous system depression, sudden collapse, coma, and/or death.
May be severely irritating to the eyes. May cause tearing, redness, swelling,
EYES:
burns, and/or eye damage.
May cause irritation. Toluene and methyl alcohol may be absorbed through
SKIN:
the skin and cause harm as noted under INHALATION (BREATHING).
Revision 09/06; MSDS Form No. 82410 - Page 3 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
May be harmful or fatal if swallowed. Swallowing methanol may cause
INGESTION
blindness and/or death. May cause throat irritation, a burning sensation,
(SWALLOWING):
abdominal spasms, nausea, vomiting, and central nervous system effects
as noted under INHALATION (BREATHING). Breathing product into the
lungs during ingestion or vomiting may cause lung injury and possible
death.
Individuals with pre-existing respiratory tract (nose, throat, and
MEDICAL CONDITIONS
lungs), cardiovascular, liver, kidney, central nervous system, eye,
AGGRAVATED BY
and/or skin disorders may have increased susceptibility to the
EXPOSURE:
effects of exposure.
Prolonged or repeated inhalation may cause brain, liver, kidney, heart, and
CHRONIC:
central nervous system damage; and toxic effects as noted under
INHALATION (BREATHING). Prolonged or repeated eye contact may cause
inflammation of the membrane lining the eyelids and covering the eyeball
(conjunctivitis). Prolonged or repeated skin contact may cause drying,
cracking, redness, itching, and/or swelling (dermatitis). Prolonged or repeated
inhalation or ingestion exposure may have reproductive toxicity and/or
teratogenicity effects.
CANCER No known carcinogenicity. For more information, see SECTION 11:
INFORMATION: CARCINOGENICITY.
Also see SECTION 15: CALIFORNIA.
POTENTIAL ENVIRONMENTAL EFFECTS
Toxic to fish. See SECTION 12: ECOLOGICAL INFORMATION.
SECTION 4: FIRST AID MEASURES
Remove to fresh air. If not breathing, give artificial respiration. If breathing
INHALATION
is difficult, give oxygen. Oxygen should only be administered by qualified
(BREATHING):
personnel. Someone should stay with victim. Get medical attention if
breathing difficulty persists.
If irritation or redness from exposure to vapor develops, move away from
EYES:
exposure into fresh air. Upon contact, immediately flush eyes with plenty
of lukewarm water, holding eyelids apart, for 15 minutes. Get medical
attention.
Remove affected clothing and shoes. Wash skin thoroughly with soap and
SKIN:
water. Get medical attention if irritation or pain develops or persists.
Revision 09/06; MSDS Form No. 82410 - Page 4 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Do NOT induce vomiting. Immediately get medical attention. Call 1-800-
INGESTION
752-7869 for additional information. If spontaneous vomiting occurs, keep
(SWALLOWING):
head below hips to avoid breathing the product into the lungs. Never give
anything by mouth to an unconscious person.
Treat symptomatically and supportively. Increased sensitivity of the heart
NOTE TO
to Adrenaline (epinephrine) may be caused by overexposure to product.
PHYSICIANS:
Administration of gastric lavage, if warranted, should be performed by
qualified medical personnel. Treatment may vary with condition of victim
and specifics of incident. Call 1-800-752-7869 for additional information.
SECTION 5: FIRE FIGHTING MEASURES
Less than 20篎 (-7篊) Tag Closed Cup
FLASH POINT:
FLAMMABLE LIMITS IN AIR: LOWER: 1 VOL% minimum UPPER: 36 VOL% maximum
(approximately) (approximately)
AUTOIGNITION
711篎 (377篊) minimum (approximately)
TEMPERATURE:
Decomposition and combustion materials may be toxic.
HAZARDOUS COMBUSTION
Burning may produce hydrocarbon gases, aldehydes,
PRODUCTS:
alcohols, organic acids, carbon monoxide and unidentified
organic compounds.
Heat, sparks, or flame.
CONDITIONS OF
FLAMMABILITY:
Carbon dioxide, alcohol-resistant foam, dry chemical, or
EXTINGUISHING MEDIA:
water spray.
NFPA 704
This information is intended solely for the use by individuals
HAZARD IDENTIFICATION:
trained in this system.
FIRE HAZARD
HEALTH HAZARD (RED)
(BLUE)
3
2 0
SPECIFIC
REACTIVITY
HAZARD
(YELLOW)
(WHITE)
Revision 09/06; MSDS Form No. 82410 - Page 5 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Keep storage containers cool with water spray. A positive-
FIRE FIGHTING
pressure, self-contained breathing apparatus (SCBA) and full-
INSTRUCTIONS:
body protective equipment are required for fire emergencies.
Vapor explosion hazard indoors, outdoors, or in sewers.
FIRE AND EXPLOSION
Vapors may travel to ignition source and flashback. Vapors
HAZARDS:
will spread along the ground and collect in low or confined
areas. Run-off to sewer may create a fire or explosion
hazard. Heated containers may rupture, explode, or be
thrown into the air. "Empty" containers may retain residue
and can be dangerous. Products are not sensitive to
mechanical impact. Product may be sensitive to static
discharge, which could result in fire or explosion.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Remove all ignition sources. Do not touch or walk through spilled product. Stop leak if you can
do it without risk. Wear protective equipment and provide engineering controls as specified in
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION. Isolate hazard area. Keep
unnecessary and unprotected personnel from entering. Ventilate area and avoid breathing vapor
or mist. A vapor suppressing foam may be used to reduce vapors. Contain spill away from
surface water and sewers. Contain spill as a liquid for possible recovery, or sorb with compatible
sorbent material and shovel with a clean, sparkproof tool into a sealable container for disposal.
Additionally, for large spills: Water spray may reduce vapor, but may not prevent ignition in
closed spaces. Dike far ahead of liquid spill for collection and later disposal.
There may be specific federal regulatory reporting requirements associated with spills, leaks, or
releases of this product. Also see SECTION 15: REGULATORY INFORMATION.
SECTION 7: HANDLING AND STORAGE
Keep away from heat, sparks, or flame. Where flammable mixtures may be
HANDLING:
present, equipment safe for such locations should be used. Use clean,
sparkproof tools and explosion-proof equipment. When transferring product,
metal containers, including trucks and tank cars, should be grounded and
bonded. Do not breathe vapor or mist. Use in a well ventilated area. Avoid
contact with eyes, skin, clothing, and shoes. Do not smoke while using this
product.
Revision 09/06; MSDS Form No. 82410 - Page 6 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Keep container tightly closed when not in use and during transport. Store
SHIPPING AND
containers below 120癋 (49癈) Store containers in a cool, dry place. Do not
STORING:
pressurize, cut, weld, braze, solder, drill, or grind containers. Keep
containers away from heat, flame, sparks, static electricity, or other sources
of ignition; containers may explode and cause injury or death. Empty
product containers may retain product residue and can be dangerous. See
SECTION 14: TRANSPORTATION INFORMATION for Packing Group
information.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Provide general ventilation needed to maintain concentration of vapor or
ENGINEERING
mist below applicable exposure limits. Where adequate general ventilation
CONTROLS:
is unavailable, use process enclosures, local exhaust ventilation, or other
engineering controls to control airborne levels below applicable exposure
limits. Where explosive mixtures may be present, equipment safe for such
locations should be used.
PERSONAL PROTECTIVE EQUIPMENT
Use NIOSH air-certified, air-supplied respirators (self-contained breathing
RESPIRATORY
apparatus or air-line) respiratory protective equipment when concentration of
PROTECTION:
methanol may exceed applicable exposure limits. Otherwise, use NIOSH-
certified P- or R- series particulate filter and organic vapor cartridges when
concentration of vapor or mist exceeds applicable exposure limits.
Protection provided by air purifying respirators is limited. Do not use N-rated
respirators. Selection and use of respiratory protective equipment should be
in accordance in the USA with OSHA General Industry Standard 29 CFR
1910.134; or in Canada with CSA Standard Z94.4.
Where eye contact is likely, wear chemical goggles; contact lens use is not
EYE
recommended.
PROTECTION:
Where skin contact is likely, wear laminate (Ansell Edmont Barrier? North
SKIN
Silver Shield? Safety 4 4h? or equivalent protective gloves; use of natural
PROTECTION:
rubber (latex), polyvinyl chloride (PVC), neoprene or equivalent gloves is not
recommended.
To avoid prolonged or repeated contact where spills and splashes are likely,
wear appropriate chemical-resistant faceshield, boots, apron, whole body
suits, or other protective clothing.
Revision 09/06; MSDS Form No. 82410 - Page 7 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Use good personal hygiene. Wash thoroughly with soap and water after
PERSONAL
handling product and before eating, drinking, or using tobacco products.
HYGIENE:
Clean affected clothing, shoes, and protective equipment before reuse.
Discard affected clothing, shoes, and/or protective equipment if they cannot
be thoroughly cleaned. Discard leather articles, such as shoes, saturated
with this product.
Where spills and splashes are likely, facilities storing or using this product
OTHER
should be equipped with an emergency eyewash and shower, both
PROTECTIVE
equipped with clean water, in the immediate work area.
EQUIPMENT:
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE,
Liquid, clear and colorless, solvent odor
APPEARANCE, AND ODOR:
Not available.
ODOR THRESHOLD:
Not available.
MOLECULAR WEIGHT:
0.84 (water = 1)
SPECIFIC GRAVITY:
7 LB/US gal (840 g/L)
DENSITY:
5.0 (air = 1) maximum (approximately)
VAPOR DENSITY:
Not available.
VAPOR PRESSURE:
56-172癈 (133-342癋)
BOILING POINT:
Not available.
FREEZING/MELTING POINT:
Not applicable
pH:
Not available.
EVAPORATION RATE:
Slight.
SOLUBILITY IN WATER:
Less than 20篎 (-7篊) Tag Closed Cup
FLASH POINT:
FLAMMABLE LIMITS IN AIR: LOWER: 1 VOL% minimum (approximately)
UPPER: 36 VOL% maximum (approximately)
711篎 (377篊) minimum (approximately)
AUTOIGNITION TEMPERATURE:
Revision 09/06; MSDS Form No. 82410 - Page 8 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 10: STABILITY AND REACTIVITY
Stable under normal temperatures and pressures. Avoid heat, sparks, or
STABILITY:
flame.
Avoid acids, alkalies, oxidizing agents, reducing agents, reactive
INCOMPATIBILITY:
halogens, or reactive metals.
Polymerization is not known to occur under normal temperature and
REACTIVITY:
pressures. Not reactive with water.
HAZARDOUS None under normal temperatures and pressures. See also SECTION 5:
DECOMPOSITION HAZARDOUS COMBUSTION PRODUCTS.
PRODUCTS:
SECTION 11: TOXICOLOGICAL INFORMATION
Based on best current information, there is no known human
SENSITIZATION:
sensitization associated with this product.
Toluene, isopropyl alcohol, methyl alcohol, acetone and xylene have
MUTAGENICITY:
demonstrated experimental effects of mutagenicity.
Based on best current information, the other components listed in
SECTION 2 are not mutagens
CARCINOGENICITY: Based on best current information, there is no known carcinogenicity
as categorized by ACGIH A1 or A2 substances; as categorized by
IARC Group 1, Group 2A, or Group 2B agents; or as listed by NTP as
either known carcinogens or substances for which there is limited
evidence of carcinogenicity in humans or sufficient evidence of
carcinogenicity in experimental animals.
Also see SECTION 15: CALIFORNIA.
Toluene, xylene, isopropyl alcohol and acetone have demonstrated
REPRODUCTIVE
animal effects of reproductive toxicity.
TOXICITY:
Based on best current information, the other components listed in
SECTION 2 are not reproductive toxicants.
Also see SECTION 15: CALIFORNIA.
Revision 09/06; MSDS Form No. 82410 - Page 9 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Toluene, methyl ethyl ketone, acetone, methyl isobutyl ketone,
TERATOGENICITY:
isopropyl alcohol, methyl alcohol and xylene have demonstrated
animal effects of teragenicity.
Based on best current information, the other components listed in
SECTION 2 are not teratogens.
Based on best current information, there are no known toxicologically
TOXICOLOGICALLY
synergistic products associated with this product. Ingested alcohol is
SYNERGISTIC
synergistic with most of these solvents.
PRODUCT(S):
SECTION 12: ECOLOGICAL INFORMATION
Toluene (108-88-3)
ECOTOXICITY:
Test & Species Conditions
96 Hr LC50 rainbow trout 24.0 mg/L Static
96 Hr LC50 bluegill 24.0 mg/L Static
96 Hr LC50 fathead minnow 31.7 mg/L flow-through
Acetone (67-64-1)
Test & Species Conditions
96 Hr LC50 rainbow trout 5540 mg/L Static
96 Hr LC50 fathead minnow 6210 mg/L flow-through
96 Hr LC50 bluegill 8300 mg/L Static
Isopropyl alcohol (67-63-0)
Test & Species Conditions
96 Hr LC50 fathead minnow
(29 days old) 94900 mg/L flow-through
96 Hr LC50 fathead minnow
(31 days old) 61200 mg/L flow-through
Methyl ethyl ketone (78-93-3)
Test & Species Conditions
96 Hr LC50 fathead minnow 3220 mg/L flow-through
96 Hr LC50 bluegill 1690 mg/L
Isobutyl acetate (110-19-0)
Test & Species Conditions
96 Hr LC50 bluegill 100 mg/L Static
Revision 09/06; MSDS Form No. 82410 - Page 10 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Methyl isobutyl ketone (108-10-1)
Test & Species Conditions
96 Hr LC50 fathead minnow 505 mg/L flow-through
24 Hr LC50 goldfish 460 mg/L
96 Hr EC50 freshwater algae
(Selenastrum capricornutum) 400 mg/L
Xylenes (o-, m-, p- isomers) (1330-20-7)
Test & Species Conditions
96 Hr LC50 fathead minnow 13.4 mg/L flow-through
96 Hr LC50 rainbow trout 8.05 mg/L flow-through
96 Hr LC50 bluegill 16.1 mg/L flow-through
Methyl alcohol (67-56-1)
Test & Species Conditions
96 Hr LC50 rainbow trout (fingerling) 13 mg/L
48 Hr LC50 trout 8000 mg/L
96 Hr LC50 fathead minnow (28 days old) 29400 mg/L flow-through
OCTANOL/WATER
Log Pow = 2.73 (Based on toluene)
PARTITION COEFFICIENT:
70 to 85 WT%; 5 to 6 LB/US gal (590 to 720 g/l)
VOLATILE ORGANIC
As per 40 CFR Part 51.100(s).
COMPOUNDS:
SECTION 13: DISPOSAL CONSIDERATIONS
Dispose in accordance with federal, state, provincial, and local regulations.
DISPOSAL:
Regulations may also apply to empty containers. The responsibility for
proper waste disposal lies with the owner of the waste. Contact Safety-
Kleen regarding proper recycling or disposal.
USEPA WASTE D001, D035
Based on available data, this information applies to the product as supplied
CODE(S):
to the user. Processing, use, or contamination by the user may change the
waste code applicable to the disposal of this product.
Revision 09/06; MSDS Form No. 82410 - Page 11 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 14: TRANSPORT INFORMATION
Shipping Name: Paint related material
DOT:
UN/NA #: UN1263 Hazard Class: 3 Packing Group: II
Required Label(s): FLAMMABLE LIQUID
Shipping Name: PAINT RELATED MATERIAL
TDG:
UN/NA #: UN1263 Hazard Class: 3 Packing Group: II
Required Label(s): FLAMMABLE LIQUID
127
EMERGENCY RESPONSE
Reference North American Emergency Response Guidebook
GUIDE NUMBER:
SECTION 15: REGULATORY INFORMATION
USA REGULATIONS
SARA SECTIONS Based on the ingredients listed in SECTION 2, this product does not
contain any "extremely hazardous substances" listed pursuant to Title III
302 AND 304:
of the Superfund Amendments and Reauthorization Act of 1986 (SARA)
Section 302 or Section 304 as identified in 40 CFR Part 355, Appendix A
and B.
This product poses the following health hazards as defined in 40 CFR
SARA SECTIONS
Part 370 and is subject to the requirements of sections 311 and 312 of
311 AND 312:
Title III of the Superfund Amendments and Reauthorization Act of 1986
(SARA):
Immediate (Acute) Health Hazard
Delayed (Chronic) Health Hazard
Fire Hazard
This product does contain "toxic" chemical(s) subject to the requirements
SARA SECTION
of section 313 of Title III of the Superfund Amendments and
313:
Reauthorization Act of 1986 (SARA) and 40 CFR Part 372.
Material CAS
Toluene 108-88-3
Isopropyl alcohol 67-63-0
Methyl ethyl ketone 78-93-3
Methyl isobutyl ketone 108-10-1
Xylenes 1330-20-7
Methyl alcohol 67-56-1
Revision 09/06; MSDS Form No. 82410 - Page 12 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
Based on the ingredients listed in SECTION 2, this product contains the
CERCLA:
following "hazardous substances" listed under the Comprehensive
Environmental Response, Compensation and Liability Act of 1980
(CERCLA) in 40 CFR Part 302, Table 302.4 with the following reportable
quantities (RQ):
Material CAS RQ
Toluene 108-88-3 1000 lb (454 kg)
Methyl ethyl ketone 78-93-3 5000 lb (2270 kg)
Methyl isobutyl ketone 108-10-1 5000 lb (2270 kg)
Xylenes 1330-20-7 100 lb (45.4 kg)
Methyl alcohol 67-56-1 5000 lb (2270 kg)
Acetone 67-64-1 5000 lb (2270 kg)
Isobutyl acetate 110-19-0 5000 lb (2270 kg)
All the components of this product are listed on, or are automatically
TSCA:
included as "naturally occurring chemical substances" on, or are
exempted from the requirement to be listed on, the TSCA Inventory.
This product may contain a detectable amount of benzene CAS 71-43-2
CALIFORNIA:
and methylene chloride CAS 75-09-2. WARNING: These chemicals are
known to the State of California to cause cancer.
This product contains a detectable amount of toluene CAS 108-88-3 and
may contain a detectable amount benzene CAS 71-43-2. WARNING:
These chemicals are known to the State of California to cause birth
defects or other reproductive harm.
CANADIAN REGULATIONS
This product has been classified in accordance with the hazard criteria of the Controlled
Products Regulations (CPR) and the MSDS contains all information required by the CPR.
B2, D1A, D2A, D2B
WHMIS:
All the components of this product are listed on, or are automatically
CANADIAN
included as "substance occurring in nature" on, or are exempted from the
ENVIRONMENTAL
requirements to be listed on, the Canadian Domestic Substances List
PROTECTION
(DSL).
ACT (CEPA):
Revision 09/06; MSDS Form No. 82410 - Page 13 of 14
MULTI-USE LACQUER THINNER
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 16. OTHER INFORMATION
This MSDS has been revised in the following sections:
REVISION INFORMATION:
Section 1, Product Code.
Not available.
LABEL/OTHER INFORMATION:
User assumes all risks incident to the use of this (these) product(s). To the best of our knowledge, the information contained herein is accurate.
However, Safety-Kleen assumes no liability whatsoever for the accuracy or completeness of the information contained herein. No
representations or warranties, either express or implied, or merchantability, fitness for a particular purpose or of any other nature are made
hereunder with respect to information or the product to which information refers. The data contained on this sheet apply to the product(s) as
supplied to the user.
?004 Printed in the USA.
Revision 09/06; MSDS Form No. 82410 - Page 14 of 14
|