MSDS 7710
7710: Multi Metal Epoxy Stick [1]
MSDS Last updated: 06/05/2006
Permatex, Inc.
10 Columbus Blvd.
Hartford, Ct 06106 USA
Telephone; 1-87-Permatex
(877) 376-2839
Emergency; 800-255-3924
MATERIAL SAFETY DATA SHEET
1. PRODUCT IDENTIFICATION
--------------------------------------------------------------------------------
Product Name; PERMA POXY MULTI-METAL EPOXY STICK 56G
Item No; 84309
Product Type; Epoxy resin
2. COMPOSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------------------
Ingredient Weight Percent ACGIH TLV; OSHA PEL;
Bisphenol A/Epichlorohydrin 10-45 Not Listed Not Listed
Based Epoxy Resin
25068-38-6
Mercaptan Amine Blend 10-40 Not Listed Not Listed
Mixture
2,4,6- 1-15 Not Listed Not Listed
Tris(Dimethylaminomethyl)P
Henol
90-72-2
Silica, Quartz <1 0.05 mg/m3 TWA 0.1 mg/m3
14808-60-7 respirable TWA respirable
3. FIRST AID MEASURES
--------------------------------------------------------------------------------
Ingestion; Do not induce vomiting. Slowly dilute with 1-2 glasses of water or
milk and seek medial attention. Never give anything by mouth to an
unconscious person.
Inhalation; Move to fresh air in case of accidental inhalation of vapors.
Oxygen or artificial respiration if needed. Obtain medial attention.
Skin Contact; Wash off immediately with soap and water removing all
contaminated clothes and shoes. If skin irritation persists, call a
physician.
Eye Contact: In case of contact, immediately flush eyes with plenty of water
for at least 15 minutes and get medical attention if irritation persists.
4. HAZARDS IDENTIFICATION
--------------------------------------------------------------------------------
Toxicity; May cause eye and skin irritation. May cause skin sensitization.
May be harmful if swallowed.
Primary Routes of Entry; Eye and skin contact, ingestion, inhalation.
Signs and Symptoms of Exposure; Ingestion may cause nausea and vomiting.
Overexposure may cause eye and skin redness. Repeated skin contact
may cause allergic skin reactions.
Ingredient Weight NTP ACGIH IARC
Percent Carcinogens
Silica, Quartz <1 A2 - Suspected Group 1;
14808-60-7 Human Carcinogen Monograph 68
1997 (inhaled)
Medical Conditions Recognized as Preexisting skin disorders.
Being Aggravated by Exposure;
5. FIRE FIGHTING MEASURES
--------------------------------------------------------------------------------
Flash Point (F/C); >300 F. Method; TOC
Recommended Extinguishing Media; Carbon Dioxide, Dry Chemicals, Foam
Special Fire-Fighting Procedures; Firefighters should wear self-contained
breathing apparatus and protective clothing
to prevent all skin and eye contact.
Hazardous Products of Combustion; Oxides of carbon. Oxides of nitrogen.
Ammonia. Oxides of sulfur. Aldehydes.
Unusual Fire/Explosion Hazards; None.
Lower Explosive Limit; Not determined.
Upper Explosive Limit; Not determined.
6. ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------------
Spill Procedures;Maintain good ventilation. Scrape up putty and place in an
appropriate waste container for disposal.
7. HANDLING AND STORAGE
--------------------------------------------------------------------------------
Storage; Store in a cool, dry area.
Handling: Avoid contact with skin and eyes. Discard contaminated leather
gloves and shoes. Wash thoroughly with soap and water after
handling.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------------
Eyes; Safety glasses.
Skin; Polyethylene or rubber gloves.
Ventilation; General; local exhaust ventilation as necessary to control any
air contaminants to within their exposure limits (or to the lowest
feasible levels when limits have not been established) during the
use of this product.
Respiratory Protection; An approved respirator (i.e. NIOSH, etc) should be worn
when exposures are expected to exceed the applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------------
Appearance; Black putty.
Odor; Slight
Boiling Point; Not determined
pH; Does not apply
Solubility in water; Negligible
Specific Gravity; 1.9
VOC Content (Wt.%): None
Vapor Pressure; Nil at 78 F
Vapor Density (Air=1); >1
Evaporation Rate; < 1 (Butyl acetate = 1)
10. STABILITY AND REACTIVITY
--------------------------------------------------------------------------------
Chemical Stability; STABLE
Hazardous Polymerization; WILL NOT OCCUR
Incompatibilities; Strong oxidizers.
Conditions to Avoid: Heat
Hazardous Products of Combustion; Oxides of carbon, Oxides of nitrogen.
Ammonia. Oxides of sulfur. Aldehydes.
11. TOXICOLOGICAL INFORMATION
--------------------------------------------------------------------------------
See Section 3
12. ECOLOGICAL INFORMATION
--------------------------------------------------------------------------------
No data available
13. DISPOSAL CONSIDERATIONS
--------------------------------------------------------------------------------
Recommended Method of Disposal; Disposal should be made in accordance with
federal, state, and local regulations.
US EPA Waste Number; NH - Not a RCRA Hazardous Waste Material.
14. TRANSPORTATION INFORMATION
--------------------------------------------------------------------------------
DOT ( 49 CFR 172 )
Domestic Ground Transport
DOT Shipping Name; Unrestricted
Hazard Class: None
UN/ID Number; None
Marine Pollutant; None
IATA
Proper Shipping Name; Not regulated
Class or Division; None
UN/NA Number; None
IMDG
Proper Shipping: Unrestricted
Hazard Class: None
UN Number; None
15. REGULATORY INFORMATION
--------------------------------------------------------------------------------
SARA 313 Chemicals; The following component(s) is listed as a SARA Section 313
Toxic Chemical.
None
CALIFORNIA PROP 65;
No California Prop 65 chemicals are known to be present at or above the No
Significant Risk Level.
TSCA Inventory Status;
Listed on Inventory; YES All components of this product are listed (or exempt)
on the EPA TSCA inventory.
16. OTHER INFORMATION
--------------------------------------------------------------------------------
Estimated NFPA Rating; Health 1, Flammability 1, Reactivity 0
Estimated HMIS Classification; Health 1, Flammability 1, Physical Hazard; 0
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Prepared By; Denise Boyd, Health and Safety Manager Revision Date; 02/13/2006
Company; Permatex, Inc. 10 Columbus Blvd. Hartford, CT USA 06106 Revision 2
Number;
The information contained in this MSDS was obtained from current and reliable sources, however, the data is
provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the
conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC,
Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No
warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by
any statement in this MSDS. Various government agencies may have specific regulations regarding the
transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS.
The user is responsible for full compliance.
For more product information by email, click here
Imperial Supplies LLC does not provide services and products outside the United States
|