Material Safety Data Sheet
PC METAL EPOXY PUTTY MSDS No. 90831-63
Date of Preparation: 8-31-2009 Revision: 8
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: PC METAL EPOXY PUTTY
Chemical Formula: Mixture
CAS Number: Mixture
General Use: Adhesive
Manufacturer: Protective Coating Company, 221 S. Third St., Allentown, PA 18102-4922, Phone (610)432-3543, FAX
(610)432-5043 (9AM-5PM EST).
Section 2 - Composition / Information on Ingredients
Ingredient Name CAS Number %
Bisphenol A Epoxy Resin 25068-38-6 10 ?30
Tri(dimethylaminomethyl)phenol 90-72-2 0.5 ?1.5
OSHA PEL ACGIH TLV NIOSH REL NIOSH
Ingredient TWA STEL TWA STEL TWA STEL IDLH
Bisphenol A Epoxy
resin None estab. None estab. None estab. None estab. None estab None estab. None estab.
Tri(dimethylamino
methyl)phenol None estab. none estab. None estab. none estab. None None estab. None estab.
estab.
Section 3 - Hazards Identification
HMIS
Emergency Overview H1
1
F
Potential Health Effects
0
R
Acute Effects B
PPE
Inhalation: None.
Sec. 8
Eye: Possible irritant and sensitizer.
Skin: Possible irritant and sensitizer.
Ingestion: Irritation of intestinal tract.
Section 4 - First Aid Measures
Inhalation: Remove to fresh air.
Eye Contact: Flush with water, consult a physician.
Skin Contact: Wash with soap and water.
Ingestion: Seek medical advice
Section 5 - Fire-Fighting Measures
NFPA
Flash Point: N/A.
Flammability Classification: IIIB
1
Extinguishing Media: Water spray, foam, CO2, dry chemicals.
0
1
Hazardous Combustion Products: CO, Aldehydes, acids, oxides of sulfur and nitrogen may be formed.
--
Fire-Fighting: Fire fighters and others who may be exposed to the products of combustion should be
equipped with NIOSH- approved positive pressure self contained breathing apparatus (SCBA)
and full protective clothing.
Section 6 - Accidental Release Measures
Spill /Leak Procedures: Dispose of in normal manner.
Disposal: Incinerate in furnace of bury in landfill according to applicable regulations; not a hazardous waste.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Section 7 - Handling and Storage
Handling Precautions: None.
Storage Requirements: Storage temperature: <90癋(32癈). Store in a cool, dry, well ventilated area.
PC METAL EPOXY PUTTY MSDS No. 90831-63
Date of Preparation: 8-31-2009 Revision: 8
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Section 8 - Exposure Controls / Personal Protection
Ventilation: Provide general or local exhaust ventilation systems if product is sanded or ground.
Respiratory Protection: Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSH-
approved respirator.
Protective Clothing/Equipment: Wear chemically protective gloves to prevent skin contact. Wear protective eyeglasses or
chemical safety goggles.
Section 9 - Physical and Chemical Properties
Form: Putty. % Volatile: < 1%
Specific Gravity (H2O=1, at 4 癈): 2.18
Appearance: Aluminum stick.
Odor: Mercaptan. VOC: <1%
Solubility (in water): insoluble in water. pH: >8
Section 10 - Stability and Reactivity
Stability: PC METAL EPOXY PUTTY is stable.
Polymerization: Hazardous polymerization cannot occur.
Section 11- Toxicological Information
Toxicity Data:
Lethal Dose Information(mg/kg) Oral Skin Inhale LC50
Bisphenol A Epoxy Resin 11400.00 rat 20000 rabbit No data No data
1350.00 rabbit
Tri(dimethylaminomethyl)phenol 1635.00 rat No data No data
estimated
Section 12 - Ecological Information
Ecotoxicity: No data.
Environmental Fate: No data.
Environmental Degradation: No data.
Section 13 - Disposal Considerations
Disposal: Incinerate in furnace of bury in landfill according to applicable regulations; not a hazardous waste.
Section 14 - Transport Information
DOT Transportation Data (49 CFR 172.101):
Shipping Name: Not regulated. Packing Group: Not determined.
Shipping Symbols: Not Label: Not required.
applicable. Special Provisions (172.102):
Hazard Class: Non hazardous. None.
ID No.: Not applicable.
Page 2 of 3
PC METAL EPOXY PUTTY MSDS No. 90831-63
Date of Preparation: 8-31-2009 Revision: 8
Section 15 - Regulatory Information
EPA Regulations:
RCRA Hazardous Waste Number: Not listed (40 CFR 261.33)
RCRA Hazardous Waste Classification (40 CFR 261.??): Not classified
CERCLA Hazardous Substance (40 CFR 302.4) unlisted specific per RCRA, Sec. 3001; CWA, Sec. 311 (b)(4); CWA, Sec.
307(a), CAA, Sec. 112
CERCLA Reportable Quantity (RQ), Not listed.
SARA 311/312 Codes: None.
SARA Toxic Chemical (40 CFR 372.65): Not listed.
SARA EHS (Extremely Hazardous Substance) (40 CFR 355): Not listed.
OSHA Regulations:
Air Contaminant (29 CFR 1910.1000, Table Z-1, Z-1-A): Not listed
OSHA Specifically Regulated Substance, none
Right-to-know: The non-hazardous ingredients in this product subject to the Pennsylvania, New Jersey, and/or Massachusetts
right-to-know laws are:
CAS NAME
144807-96-6 Magnesium Silicate Hydrate
Trade Secret Polyether Polymercaptan
65997-17-3 Soda Lime Borosilicate Glass
7439-89-6 Iron/silicon/titanium/aluminum alloy
Section 16 - Other Information
Storage Requirements: Storage temperature: <90癋(32癈). Store in a cool, dry, well ventilated area.
Personal Hygiene: Wash thoroughly after handling, especially before eating, drinking, smoking, and using restroom facilities.
Wash contaminated goggles, faceshield, and gloves.
Prepared By: Charles Moloney
Revision Notes:
Notes: A bulletin such as this cannot be expected to cover all possible individual situations. As the user has the responsibility to provide a safe workplace, all
aspects of an individual operation should be examined to determine if, or where, precautions- in addition to those described herein- are required. Any health
hazard and safety information herein should be passed on to your customers or employees as the case may be.
Disclaimer: The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are
beyond our control, we make no guarantee of results, and assume no liability for damages incurred by the use of this material. All chemicals may present
unknown health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that
exist. Final determination of suitability of the chemical is the sole responsibility of the user. No representation or warranties, either expressed or implied, of
merchantability, fitness for a particular purpose or any other natures are made hereunder with respect to the information refers. It is the responsibility of the user
to comply with all applicable federal, state and local laws and regulations.
Page 3 of 3
|