MAPEI Material Safety Data Sheet (MSDS) - North America Read complete MSDS prior to using product. Page 1 of 2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MONDO PU 105 PART B Two components polyurethane adhesive
Product Name: Product Description:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IN THE EVENT OF A CHEMICAL EMERGENCY INVOLVING A SPILL, LEAK, FIRE, EXPLOSION, EXPOSURE OR ACCIDENT CONTACT THE
FOLLOWING NUMBERS:
EMERGENCY 24 HOUR NUMBERS: (USA) CHEMTREC 1-800-424-9300 (Canada) CANUTEC 1-613-996-6666
GENERAL INFORMATION NUMBERS: (USA) 1-954-246-8888 (Canada) 1-450-662-1212
CONSUMER STATEMENT:
WARNING. Combustible; Vapor harmful; Corrosive, Skin, eyes and respiratory irritant. Harmful or fatal if swallowed
WORK AND HYGIENE PRACTICE:
Remove contaminated clothing immediately. Wash hands, after each use and before eating, drinking, or using toiletries. Minimize contact of
product on skins.
________________________________________________________________________________________________________________________
I - GENERAL INFORMATION II - PHYSICAL CHARACTERISTICS
MANUFACTURER: Calculated VOC (See below.) 855 g/lt
USA and Puerto Rico Canada Boiling Point N/E
MAPEI CORPORATION MAPEI, INC. Vapor Pressure (mmHg) N/E
1144 East Newport Center Drive 2900 Francis-Hughes Avenue Vapor Density (AIR=1) N/E
Deerfield Beach, FL 33442 Laval, QC H7L 3J5 Specific Gravity (H20=1) N/E
Ph: (954) 246-8888 Ph: (450) 662-1212 Melting/Freezing Point (F) N/A
MSDS PREPARED BY: Evaporation Rate (Butyl Acetate=1) Same as water.
Regulatory Affairs Department - MAPEI North America Solubility in water Dispersible
pH (paste/liquid) N/E
REVISION DATE : 07-10-19 Appearance and Odor Brown liquid. Slight solvant odor.
(VOC per CA South Coast Air Quality Management District, Rule 1168)
________________________________________________________________________________________________________________________
III - HAZARD ASSESSMENT
Hazardous Components ACGIH % Percent
(specific chemical identity; common names): OSHA (PEL) (TLV-TWA) Other Limits Recommended (Optional)
Isophorone Diamine (cas# 2855-13-2) N/E 15-40 %
Benzyl Alcohol (cas# 100-51-6) N/E 15-40%
2,4,6 tri(dimethylaminomethyl)phenol (cas# 90-72-2) N/E 10-30%
For California (Proposition 65): This product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive toxicity.
All ingredients are listed within the US TSCA and Canadian DSL.
(USA) - HMIS (Hazardous Materials Identification System) Rating: Health - 3 Fire - 3 Reactivity - 0 Protection - H
(Canada) - WHMIS (Workplace Hazardous Materials Information System) Classifications: B3; D2B; E
________________________________________________________________________________________________________________________
IV - TRANSPORTATION
By GROUND - USA and Puerto Rico (DOT): By SEA (IMDG):
Same as CANADA Contact MAPEI
By GROUND - Canada (TDG): By AIR (IATA):
Not controlled Contact MAPEI
NOTE: Classifications utilizing the term "LIMITED QUANTITY" at the end of a transportation mode's shipping description allows the
product container to be packaged within a sturdy outer container (over pack) in lieu of a UN container for that mode of transportation.
________________________________________________________________________________________________________________________
V - FIRE AND EXPLOSION HAZARD DATA
Flash Point - 87 C Lower Explosive Limit (%) - N/E Upper Explosive Limit (%) - N/E
Unusual Fire and Explosion Hazards - Some decomposition products may be harmful.
Extinguishing Media:
Product will not burn until all water content has evaporated. Water spray, carbon dioxide, dry chemical or foam.
Special Fire Fighting Procedures:
Wear standard fire fighting gear with self-contained breathing apparatus.
________________________________________________________________________________________________________________________
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N/A="Not Applicable" N/E="Not Established"
MAPEI Material Safety Data Sheet (MSDS) - North America Read complete MSDS prior to using product. Page 2 of 2
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MONDO PU 105 PART B Product Description: Two components polyurethane adhesive
Product Name:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
VI - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None known.
Incompatibility (Materials to Avoid): Strong oxidizing agents, strong acids, and strong bases.
Hazard Decomposition of By-products: Carbon monoxide, carbon dioxide, oxides of nitrogen, and other unidentified organic compounds.
Polymerization: Will Not Occur Conditions to Avoid: None known.
________________________________________________________________________________________________________________________
VII - HEALTH HAZARD DATA AND FIRST AID
Routes of entry during normal usage: Inhalation? YES Skin? YES Ingestion? YES
Health Hazards:
Acute: Inhalation or contact can cause irritation to eyes, skin, nose or throat to sensitive people. If ingested can cause nausea, vomiting,
griping, and diarrhea.
Chronic: NO
Carcinogenicity: NTP - NO IARC - NO OSHA - NO
Signs and Symptoms of Overexposure:
Nausea; vomiting; nose and throat irritation; eye irritation; and skin irritation.
Medical Conditions That Can Be Aggravated by Exposure:
Allergies, skin and respiratory disorders. Product sensitivity.
________________________________________________________________________________________________________________________
VIII - EMERGENCY AND FIRST AID PROCEDURE
Eyes - Flush with cool water for 15 minutes while holding eyelid open. If irritation persists, seek medical attention immediately.
Skin - Avoid contact with skin. Remove contaminated clothing. Wash affected area thoroughly with soap and water. If irritation
persists, seek immediate medical attention.
Inhalation - Remove to fresh air. If not breathing, trained personnel should initiate artificial respirations and immediate medical attention
should be obtained.
Ingestion - Do not induce vomiting. Do not give anything by mouth to an unconscious person. Seek medical attention immediately.
________________________________________________________________________________________________________________________
IX - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken if Material is Leaked or Spilled:
While using appropriate protective equipment, place spilled material in poly drum, or container required by local disposal company, and store in a safe
place till material can be disposed of in accordance with regulations.
Waste Disposal Method:
Dispose of in accordance with local, state, and federal regulations governing your location.
Precautions to be taken during Handling and Storage:
Keep container closed when not in use. Store at 60 - 95癋(15 ?35癈) and out of the sun. Use adequate ventilation to avoid breathing vapors when
cover is removed.
Other Precautions:
Avoid prolonged skin contact.
________________________________________________________________________________________________________________________
X - CONTROL MEASURES
Respiratory Protection:
If workplace exposure limit of product is exceeded, a NIOSH/MSHA approved air supplied respirator is required in absence of proper
environmental control. Engineering or administrative controls should be implemented to reduce exposure.
Ventilation: Local Exhaust - Use in WELL VENTILATED areas only. Mechanical - Use only intrinsically safe devices.
Special - N/A Other - N/A
Eye Protection - Safety glasses or goggles as necessary to prevent eye contact.
Protective Gloves - Impervious. (Nitrile, rubber, or better)
Other Protective Equipment - As needed to minimize contact with skin.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of
these data or the results to be obtained from the use thereof. MAPEI assumes no responsibility for personal injury or property damage to
vendees, users, or third parties caused by the material. Such vendees or users assume all risks associated with the use of the material.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
N/A="Not Applicable" N/E="Not Established"
|