Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: +01-813-248-0585
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 21425 FAST CURE EPOXY PART 1
Item No: 150345E
Product Type: Epoxy
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component Weight% ACGIH; TLV-TWA OSHA PEL
BISPHENOL A/EPICHLOROHYDRIN 30-60 Not listed Not listed
BASED EPOXY RESIN
25068-38-6
10 mg/m3 TWA (dust)
ALUMINUM HYDROXIDE 40-50 Not listed
21645-51-2
10 mg/m3 15 mg/m3
TITANIUM DIOXIDE <7
13463-67-7
EPOXY RESIN <3 Not listed Not listed
28906-96-9
3. HAZARDS IDENTIFICATION
May cause eye, skin and respiratory irritation. May cause skin sensitization. Contact at elevated
Toxicity:
temperatures can cause permanent damage to eyes including blindness.
Eye and skin contact, ingestion, inhalation
Primary Routes of Entry:
Eyes: Exposure to liquid or vapor causes mild eye irritation. Symptoms may include burning, tearing,
Signs and Symptoms of Exposure:
redness, stinging, blurred vision and corneal injury. Repeated skin contact may cause allergic skin
reactions. Ingestion may cause nausea and vomiting.
Component Weight% NTP ACGIH Carcinogens IARC
TITANIUM DIOXIDE <7 male rat-negative, A4 Group 2B; Vol 93,2006; Vol
13463-67-7 female rat-negative, 47,1989
male mice-negative,
female mice-negative
Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
Medical Conditions Recognized as
Being Aggravated by Exposure:
4. FIRST AID MEASURES
Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never
Ingestion:
give anything by mouth to an unconscious person.
Move to fresh air in case of accidental inhalation of vapours. If not breathing, give artificial respiration.
Inhalation:
Obtain medical attention.
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. Get
Skin Contact:
medical attention.
Flush eyes with clean water for at least 20 minutes while gently holding eyelids open, lifting upper and
Eye Contact:
lower lids.
5. FIRE FIGHTING MEASURES
>400癋 (204.4癈) PMCC
Flash Point 癋(C?:
Carbon Dioxide, Dry Chemicals, Foam.
Recommended Extinguishing Media:
Material will not burn unless preheated. Firefighters shoud wear self-
Special Fire-Fighting Procedures:
contained breathing apparatus and protective clothing to prevent all skin
and eye contact.
When heated to decomposition it emits fumes of Cl-, carbon monoxide,
Hazardous Products of Combustion:
other fumes and vapors varying in composition and toxicity
Heating above 300癋 in the presence of air may cause slow oxidation
Unusual Fire/Explosion Hazards:
decomposition and above 500癋 may cause polymerization.
1 of 3
Product Name: 21425 FAST CURE EPOXY PART 1 Item No: 150345E
5. FIRE FIGHTING MEASURES
Not determined
Lower Explosive Limit:
Not determined
Upper Explosive Limit:
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal. Prevent from entering waterways or sewers.
7. HANDLING AND STORAGE
Store away from heat.
Storage:
Avoid contact with skin and eyes. Use only in a well ventilated area. Avoid contact with vapors from
Handling:
heated material. Wash hands before eating and smoking. Discard contaminated leather gloves and
shoes.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses.
Eyes:
Neoprene or nitrile gloves recommended.
Skin:
General; local exhaust ventilation as necessary to control any air contaminants to within their exposure
Ventilation:
limits (or to the lowest feasible levels when limits have not been established) during the use of this
product.
An approved organic vapor respirator should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Black viscous liquid
Appearance:
Slight
Odor:
>500癋 (260癈)
Boiling Point:
Neutral
pH:
Negligible
Solubility in Water:
1.53
Specific Gravity:
<1% by weight
VOC(Wt.%):
0.03 mm Hg @ 171癋
Vapor Pressure:
>1
Vapor Density (Air=1):
<1 (butyl acetate = 1)
Evaporation Rate:
10. STABILITY AND REACTIVITY
Stable at normal conditions
Chemical Stability:
Will not occur.
Hazardous Polymerization:
Strong Lewis or mineral acids, strong oxidizing agents, strong mineral and
Incompatabilities:
organic bases (especially primary and secondary aliphatic amines)
Heat
Conditions to Avoid:
When heated to decomposition it emits fumes of Cl-, carbon monoxide,
Hazardous Products of Combustion:
other fumes and vapors varying in composition and toxicity
11. TOXICOLOGICAL INFORMATION
See Section 3
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations..
NH - Not a RCRA Hazardous Waste Material
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Ground Transport (DOT)
Unrestricted
DOT Shipping Name:
None
Hazard Class:
2 of 3
Product Name: 21425 FAST CURE EPOXY PART 1 Item No: 150345E
14. TRANSPORTATION INFORMATION
None
UN/ID Number:
IATA
Not Regulated
Proper Shipping Name:
None
Class or Division:
None
UN/ID Number:
IMDG
Unrestricted
Proper Shipping:
None
Hazard Class:
None
UN Number:
None
Marine Pollutant:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
NONE
CALIFORNIA PROP 65:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive
harm.
TSCA Inventory Status: All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 2, FLAMMABILITY 1 , REACTIVITY 1.
Estimated NFPA Rating:
HEALTH 2, FLAMMABILILTY 1, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Manager-Environmental, Health & Safety
Prepared By: Revision Date: March/02/2009
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 06106 5
Company: Revision
Number:
1-87-Permatex (877) 376-2839
Telephone No.:
3 of 3
Permatex, Inc.
10 Columbus Blvd.
Hartford, CT 06106 USA
Telephone: 1-87-Permatex
(877) 376-2839
Emergency: 800-255-3924
International Emergency: +01-813-248-0585
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 21425 FAST CURE EPOXY PART 2
Item No: 150445E
Product Type: Epoxy
2. COMPOSITION/INFORMATION ON INGREDIENTS
Component Weight% ACGIH; TLV-TWA OSHA PEL
10 mg/m3 TWA (dust)
ALUMINUM HYDROXIDE 40-50 Not listed
21645-51-2
POLYMERCAPTAN CURING 20-40 Not listed Not listed
AGENT
Proprietary
_
2,4,6- <10 Not listed Not listed
TRIS(DIMETHYLAMINOMETHYL)P
HENOL
90-72-2
BENZYL ALCOHOL <10 Not listed Not listed
100-51-6
STYRENE <5 20 ppm 100 ppm
100-42-5
3. HAZARDS IDENTIFICATION
Corrosive. Severe irritation or burns, necrosis, blistering and permanent injury. Product can be absorbed
Toxicity:
through the skin and may cause nausea, headache and general discomfort. May cause lacrimation,
conjunctivitis, corneal damage and may cause permanent injury (i.e. blindness). If the hardener is poorly
ventilated, strongly heated or atomized, the vapor or mist can cause severe irritation of the respiratory
tract, damage contacted tissue and produce scarring. Coughing and chest pain may result, nausea and
vomiting in severe cases. Causes severe damage to mucous membranes if swallowed. May cause
malaise, headache, discomfort, bleeding and vomiting of blood.
Eye and skin contact, ingestion, inhalation
Primary Routes of Entry:
Overexposure may cause eye and skin redness, difficulty breathing and vomiting. Contact with product at
Signs and Symptoms of Exposure:
elevated temperatures can result in thermal burns.
Component Weight% NTP ACGIH Carcinogens IARC
BENZYL ALCOHOL <10 male rat-no evidence;
100-51-6 female rat-no
evidence; male mice-
no evidence; female
mice-no evidence
STYRENE <5 male rat-negative; A4 - Not Classifiable Group 2B; Vol. 60, 1994;
100-42-5 female rat-negative; as a Human Monograph 82, 2002
male mice-equivocal; Carcinogen
female mice-negative
Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
Medical Conditions Recognized as
Being Aggravated by Exposure:
4. FIRST AID MEASURES
Do not induce vomiting. Slowly dilute with 1-2 glasses of water or milk and seek medical attention. Never
Ingestion:
give anything by mouth to an unconscious person.
Move to fresh air in case of accidental inhalation of vapours. Oxygen or artificial respiration if needed.
Inhalation:
Obtain medical attention.
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. Get
Skin Contact:
medical attention.
1 of 3
Product Name: 21425 FAST CURE EPOXY PART 2 Item No: 150445E
4. FIRST AID MEASURES
Flush eyes with clean water for at least 20 minutes while gently holding eyelids open, lifting upper and
Eye Contact:
lower lids.
5. FIRE FIGHTING MEASURES
>200癋 (93.3癈) Estimated
Flash Point 癋(C?:
Carbon Dioxide, Dry Chemicals, Foam.
Recommended Extinguishing Media:
Firefighters shoud wear self-contained breathing apparatus and protective
Special Fire-Fighting Procedures:
clothing to prevent all skin and eye contact. Use water spray to cool
exposed containers.
Acrid and toxic fumes with organic amines, ammonia, oxides of carbon and
Hazardous Products of Combustion:
nitrogen
Sudden reaction and fire may result if product is mixed with an oxidizing
Unusual Fire/Explosion Hazards:
agent.
Not determined
Lower Explosive Limit:
Not determined
Upper Explosive Limit:
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal. Prevent from entering waterways or sewers.
7. HANDLING AND STORAGE
Store away from heat. Do not store in reactive metal containers. Keep away from acids and oxidizers.
Storage:
Avoid prolonged skin contact. Keep away from eyes. Avoid breathing vapors, if exposed to high vapor
Handling:
concentration, leave area at once. Wash thoroughly with soap and water after handling. Discard
contaminated leather gloves and shoes. Do not mix with sodium nitrite or other nitrosating agents as
cancer-causing nitrosamines could be formed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses with side shields or chemical goggles.
Eyes:
Neoprene or nitrile gloves recommended.
Skin:
General; local exhaust ventilation as necessary to control any air contaminants to within their exposure
Ventilation:
limits (or to the lowest feasible levels when limits have not been established) during the use of this
product.
An approved organic vapor respirator should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Black paste
Appearance:
Mercaptan
Odor:
>300癋 (148.8癈)
Boiling Point:
Does not apply
pH:
Slight
Solubility in Water:
1.4
Specific Gravity:
10.8%
VOC(Wt.%):
<5 mm Hg @ 77癋
Vapor Pressure:
>1
Vapor Density (Air=1):
<1 (butyl acetate = 1)
Evaporation Rate:
10. STABILITY AND REACTIVITY
Stable at normal conditions
Chemical Stability:
Will not occur.
Hazardous Polymerization:
Strong oxidizers, Materials reactive with hydroxyl compounds,
Incompatabilities:
Sodium/calcium hypochlorite, Peroxides, Reactive metals (e.g. Na, Ca,
zinc), Acids
Heat, Corrodes base metals
Conditions to Avoid:
Acrid and toxic fumes with organic amines, ammonia, oxides of carbon and
Hazardous Products of Combustion:
nitrogen
11. TOXICOLOGICAL INFORMATION
See Section 3
2 of 3
Product Name: 21425 FAST CURE EPOXY PART 2 Item No: 150445E
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations..
NH - Not a RCRA Hazardous Waste Material
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Ground Transport (DOT)
CONSUMER COMMODITY
DOT Shipping Name:
ORM-D
Hazard Class:
None
UN/ID Number:
IATA
Consumer Commodity (Not more than 1 liter)
Proper Shipping Name:
Class 9
Class or Division:
ID 8000
UN/ID Number:
IMDG
Amines, liquid, corrosive,n.o.s., (Tris-2,4,6-(Dimethylaminomethyl) Phenol), Limited Quantity
Proper Shipping:
Class 8 PGIII
Hazard Class:
UN 2735
UN Number:
None
Marine Pollutant:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
STYRENE
CALIFORNIA PROP 65:
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive
harm.
TSCA Inventory Status: All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 3, FLAMMABILITY 1 , REACTIVITY 1.
Estimated NFPA Rating:
HEALTH 3, FLAMMABILITY 1, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Manager-Environmental, Health & Safety
Prepared By: Revision Date: March/02/2009
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 06106 4
Company: Revision
Number:
1-87-Permatex (877) 376-2839
Telephone No.:
3 of 3
|