MATERIAL SAFETY DATA SHEET
Marine Epoxy Sticks
Date of Original Preparation: July 20, 2001 Revision Date: December 9, 2004
Section 1 - Product Information
Bondo Corporation
Manufacturer:
3700 Atlanta Industrial Parkway NW
Atlanta, GA 30331
For US transportation emergencies call - For Canadian transportation emergencies
Emergency
Chemtrec: 800-424-9300 call - Canutec: 613-996-6666
Telephone:
404-696-2730 (USA 8:30am ?4:30pm Eastern Product Use: Filler
Information:
Time)
Stock Number: 3101
Emergency Overview
Signs of Overexposure: Irritation, sensitization, dermatitis.
Emergency First Aid: Move to fresh air, remove contaminated clothing, wash effected skin with soap and water, do not
use solvents or thinners; if product gets into eyes, remove contact lenses, flush with water for 15 minutes.
Handling: When handling, wear solvent resistant gloves and safety eyewear. Close all containers tightly after use. Do
not eat, drink or smoke in work areas.
Clean-up: Clean-up as a non-hazardous waste.
Fire Fighting: Use foam, carbon dioxide, dry chemical or water fog or spray.
NFPA Flammability: NA
Bondo Corporation has no oversight with respect to the guidance practices or policies or manufacturing processes of
other companies handling or using this material. The information given in this MSDS is only related to the product as
shipped in its original condition as described in Section 2, "Hazardous Ingredients" and Section 9 "Physical and Chemical
Properties".
Section 2 - Hazardous Ingredients
Vapor ACGIH OSHA LD50 LD50 LC50
Hazardous Ingredient CAS No. Press. TLV PEL Oral Derm Inhal. LEL
Bisphenol A Diglycidyl Ether Polymer 25068-38-6 n. ap. n. av. n. av. 11400 2340 n. av. n.ap
2,4,6-tri(dimethylaminomethyl) phenol 90-72-2 n. ap. 5ppm n. av. n. av. n. av. n. av. n. ap
LD50 Oral - rat mg/m3, LD50 Dermal - rabbit mg/m3,LC50 Inhalation - rat mg/m3 unless otherwise specified.
Section 3 ?Hazards Identification
Primary Routes of Entry: skin contact, ingestion, eyes.
Exposure Effects Acute and Chronic:
Skin contact: Acute: irritation, redness and dermatitis.
Eye contact: Acute: irritation.
Ingestion: Acute: Gastrointestinal irritation.
Chronic: Skin sensitization and dermatitis.
Other Health Effects: None
Section 4 ?First Aid Measures
Emergency and First Aid Procedures: In all cases if symptoms persist, seek medical attention.
Skin contact - remove contaminated clothing, wash with soap and water or recognized skin cleaner. Do not use
solvents or thinners.
Eye contact - contact lenses must be removed, flush with water for at least 15 minutes, consult a physician immediately.
Ingestion - Induce vomiting. Consult a physician or poison control center immediately. Treat symptomatically
Medical Conditions Prone to Aggravation: None known.
Section 5 ?Fire Fighting Measures
Flash Point (SFCC): not applicable
Lower Explosive Limit: not determined
Extinguishing Media: foam, carbon dioxide, dry chemical or water fog or spray. Water jet or stream is unsuitable.
Unusual Fire and Explosion Hazards: Keep containers tightly closed, isolate from heat, electrical equipment, sparks
and open flame. Closed containers may explode when exposed to extreme heat. Fire may produce dense black smoke
containing hazardous products of combustion. Symptoms may not be immediately apparent. Obtain medical attention.
Special Fire Fighting Procedures: Water should be used to cool containers exposed to fire. Fire fighting personnel
should wear self-contained breathing apparatus.
Section 6 ?Accidental Release
Steps To Be Taken In Case Material Is Released Or Spilled: Considered to be non-hazardous waste.
Section 7 ?Handling and Storage
Precautions To Be Taken In Handling And Storing: Minimize contact between the worker and this material. No
smoking. Store containers out of sun and away from heat, sparks, and open flames. Close all containers after each
use.
Hygienic Practices: Do not eat, drink or smoke in work areas. Wash hands before eating, smoking, or using the
washroom. Launder clothing before reuse.
Other Precautions: Do not take internally. Observe label precautions. The information contained in this safety data
sheet does not constitute the user's own assessment of workplace risks as required by regulations.
Section 8 ?Exposure Controls
Primary Routes of Entry: Inhalation, skin contact, ingestion, eyes.
Respiratory Protection: None required.
Ventilation: None required
Protective Gloves: Required for prolonged or repeated contact. Use solvent resistant gloves. Barrier creams are not
substitutes for full physical protection. Refer to safety equipment supplier for effective glove recommendations.
Eye Protection: Use safety glasses or goggles.
Other Protective Equipment: None
Section 9 ?Physical and Chemical Properties
Evaporation Rate: not applicable
Weight per Gallon (Specific Gravity): 15.8 lb/gal (1.9)
Odor and Appearance: mercaptan odor, paste
Freezing point, Coefficient of water/oil distribution ,pH: Not applicable or not available
Section 10 ?Stability and Reactivity
Stability: Stable under non-emergency conditions.
Materials to Avoid: None known
Hazardous Polymerization: Will not occur.
Conditions to Avoid: None known
Hazardous Decomposition Products: Carbon monoxide, aldehydes, acids, oxides of sulfur and nitrogen.
Section 11 - Toxicological Information
Carcinogenicity (risk of cancer): None known
Sensitization (effects of repeated exposure): This product may cause skin sensitization to certain individuals.
Teratogenicity (risk of malformation in an unborn fetus): None known
Reproductive Toxicity (risk of sterility): None known
Mutagenicity (risk of heritable genetic effects): None known
Threshold Limit Value: None established for this product. For further information, see Section 2 - Hazardous
Ingredients
Section 12 - Ecological Information
General Information: The nature and packaging size of these products minimizes the potential for adverse ecological
impact.
Environmental Impact Data (percentage by weight):
Ozone Depleters: none Heavy Metals: none There are extensive ecological data available on the various
components of this product. An adequate representation of all these data is beyond the scope of this document. Please
contact the information phone number found in Section 1.
Section 13 ?Disposal Information
Waste Disposal Method: Dispose of in accordance with federal, state or provincial and local pollution requirements.
Clean-up preferably with a detergent, avoid the use of solvents. This information applies only to the material as
manufactured; processing, use or contamination may make this information inappropriate, inaccurate or incomplete. The
generator of the waste has the responsibility for proper waste classification, transportation and disposal.
Section 14 ?Transportation Information
Not regulated
Section 15 - Regulatory Information
OSHA: These products are considered hazardous under the Federal OSHA Hazard Communication Standard.
WHMIS: D1B;D2B
SARA Title III:
Section 302 Extremely Hazardous Substances: None
Section 311 / 312 Hazard Categories: Immediate health, delayed health, fire hazard.
Section 313 Toxic Chemicals: none. You may be required to submit this MSDS to state and local emergency response
agencies (SERC & LEPC) and to your local fire department. Also, you may be affected
by other sections of this law, depending on the chemicals and amounts that you inventory at your location. To learn more
about your responsibilities, call the EPA Hotline (800) 535-0202.
TSCA status: All ingredients are TSCA registered.
Proposition 65: WARNING: This product contains a chemical known to the State of California to cause cancer.
NFPA704: Health: 1 Flammability: 0 Reactivity: 0
Section 16 - Preparation Information
Prepared by Bondo Corporation Research and Development Department
Phone: 404-696-2730
Do not handle until the manufacturer's safety precautions have been read and understood. Regulations require that all
employees be trained on Material Safety Data Sheets for all products with which they come in contact.
While Bondo Corporation believes that the data contained herein are accurate and derived from qualified sources, the
data are not to be taken as a warranty or representation for which Bondo Corporation assumes legal responsibility. They
are offered solely for your consideration, investigation and verification. Any use of these data and information must be
determined by the user to be in accordance with applicable federal, state, provincial and local laws and regulations.
|