Material MSDS # 315
Safety Latest Revision: June 2008
Data Page 1 of 5
Sheet Selectrode Industries, Inc.
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
1.1 PRODUCT NAME
Magic Metal: 8000
1.2 MANUFACTURER
Selectrode Industries, Inc.
230 Broadway
Huntington Station, NY 11746 U.S.A.
Phone: 631-547-5470
Fax: 631-547-5475
E-mail: info@selectrode.com
1.3 EMERGENCY TELEPHONE NUMBER: 631-547-5470
________________________________________________________________________________________________
2. COMPOSITION / INFORMATION ON INGREDIENT
Hazardous ingredients:
Important: This section covers the materials of which the products are manufactured. The fumes and gases produced during normal use of
this product are covered in Section 3. The term "Hazardous" in "Hazardous Material" should be interpreted as a term required and defined in
OSHA Hazard Communication Standard 29CFR 1910-1200 and it does not necessarily imply the existence of hazard. The chemicals or
compounds reportable by Section 313 of SARA are marked by the symbol #.
INGREDIENTS CAS# % RANGE TSCA HMIS
Health
Fire Reactivity PPI
Glycidyl ethers of bisphenol A resins
25068-38-6 5.0-10.0 Y 2 1 0 B
Diglycidyl ethers of bisphenol A resins
028064-14-4 1.0-5.0 Y 1 1 0 B
Tri(dimethylaminomethyl)phenol
90-72-2 0.5-1.5 Y 3 1 1 D
***ALL Ingredients in this product are listed in the T.S.C.A Inventory
___________________________________________________________________________
3. HAZARD IDENTIFICATION
Effects of acute exposure:
Route(s) of entry Species Exposure and Dose
Glycidyl ethers of bisphenol A resins Oral Rat, Adult LD50 5000. mg/kg
Skin Rabbit. Adult LD50 20000. mg/kg
Diglycidyl ethers of bisphenol A resins Oral Rat, Adult LD50 5000. mg/kg
Skin Rabbit. Adult LD50 20000. mg/kg
Tri(dimethylaminomethyl)phenol Oral Rat, Adult LD50 1630. mg/kg
Material MSDS # 315
Safety Latest Revision: June 2008
Data Page 2 of 5
Sheet Selectrode Industries, Inc.
Effects of chronic exposure: Refer to section 11 for specific toxicological information.
_____________________________________________________________________________________________
4. FIRST AID MEASURES
Inhalation: Remove victim to fresh air if effects occur.
Skin: Wash off with soap and plenty of water.
Eyes: Irrigate with water for several minutes. Consult a physician.
Ingestion: Seek medical advice.
Note: Never give anything by mouth to an unconscious person.
_____________________________________________________________________________________________
5. FIRE FIGHTING MEASURES
Flammability Class IIIB
Flash Range none
Tag Open Cup
Explosive Range none
none
Extinguishing Method: Water spray, foam, CO2, dry chemicals
Unusual Hazards: Fire fighters and others who may be exposed to the products of combustion should
be equipped with NIOSH-approved positive pressure self contained breathing apparatus (SCBA) and full protective
clothing.
_____________________________________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
Steps to be taken: Spills or leaks: Dispose of in normal manner.
_____________________________________________________________________________________________
7. HANDLING AND STORAGE
7.1 HANDLING
With standard transportation equipment. Follow good manufacturing and handling practices.
Personal Hygiene: Wash thoroughly after handling, especially before eating, drinking, smoking, and using
restroom facilities, Wash contaminated goggles, face shields, and gloves. Professionally launder contaminated
clothing before use.
Empty Container Precautions: ATTENTION: This container can be hazardous when empty. Follow label
cautions even after the container is empty since empty containers could retain product residues. Do not re-use
empty containers for food, clothing, or products for human or animal consumption, or where skin contact can occur.
Material MSDS # 315
Safety Latest Revision: June 2008
Data Page 3 of 5
Sheet Selectrode Industries, Inc.
7.2 STORAGE
Store in a cool, dry well ventilated area.
Storage Temperature: < 90癋 (32癈)
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/ PERSONAL PROTECTION
Occupational Exposure Limits:
ACGIH TLV ACGIN TLV-C ACGIH STEL OSHA STEL ASHA PEL
Glycidyl ethers of bisphenol A resins N/est N/est N/est N/est N/est
Diglycidyl ethers of bisphenol A resins N/est N/est N/est N/est N/est
Tri(dimethylaminomethyl)phenol 5.00 PPM N/est N/est N/est N/est
Protective Equipment Types:
Eyes: Safety glasses or goggles
Respiratory: None required unless sanding or abrading
Gloves: Appropriate impervious gloves. Because a variety of protective gloves exist, consult a glove
manufacturer to determine the proper type for a specific operation.
Other: None required
Ventilation:
General Mechanical: None required
Local Exhaust: Used to keep exposures below recommendations. Use if material is heated above 100癋
( 38?C)
__________________________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state: putty
Odor: Sulphur, Mercaptan
Appearance/Color: Bronze
pH: >7.0
Boiling point: N/A
Melting point: N/A
Evaporation Rate: N/A non Volatile
Vapor Density: Non Volatile
% Volatile Weight: 0.0%
% Volatile <1.0%
VOC: <1.0 %
Molecular Weight
Heavy Elements (ppm): 0.0
Specific Gravity 1.96
Solubility: insoluble in water
___________________________________________________________________________
10. STABILITY AND REACTIVITY
STABILITY: This product is stable.
Material MSDS # 315
Safety Latest Revision: June 2008
Data Page 4 of 5
Sheet Selectrode Industries, Inc.
Hazardous Polymerization: Hazardous Polymerization will not occur
Incompatibility: None
Conditions to avoid: Not applicable.
Materials to avoid: None
Hazardous decomposition products: CO2, aldehydes, acids, oxides of sulphur and nitrogen.
_____________________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
Effects of acute exposure
Toxicity to animals: Unknown
Local effects: Not applicable.
Inhalation: Not applicable for the product.
Ingestion: Irritation of intestinal tract
Contact with skin: Possible irritant and sensitizer
Contact with eyes: Possible irritant and sensitizer
_____________________________________________________________________________________________
12. ECOLOGICAL INFORMATION
About product: data are unknown
About ingredients: data are unknown.
_____________________________________________________________________________________________
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Incinerate in furnace or bury in landfill in accordance with all applicable regulations; not a
hazardous waste.
_____________________________________________________________________________________________
14. TRANSPORT INFORMATION
INTERNATIONAL REGULATIONS:
Land shipment: no hazard
- Rail / route (RID/ADR):
Material MSDS # 315
Safety Latest Revision: June 2008
Data Page 5 of 5
Sheet Selectrode Industries, Inc.
Sea shipment: no hazard
Shipment by air: no hazard
____________________________________________________________________________________________
15. REGULATORY INFORMATION
Right to Know: The non-hazardous ingredients in this product subject to the Pennsylvania, New Jersey,
and/or Massachusetts Right-to-Know laws are:
CAS Name
14807-96-6 Magnesium Silicate Hydrate
Trade Secret Polyether Polymercaptan
65997-17-3 Sodium Calcium Magnesium Silicate
7440-50-8 Copper
___________________________________________________________________________
16. OTHER INFORMATION
The information in this document is believed to be correct as of the date issued. However, no warranty is expressed
to be implied regarding the accuracy or completeness of this information. This information and product are furnished
on the condition that the person receiving them shall make his own determinations as to the suitability of the product
for his particular purpose and on the condition that he assume the risk of his use thereof.
This Material Safety Data Sheet complies with the EC directives 91/155/EEC and 93/112/EEC
Including modifications 2001/58/EC.
Complies with OSHA Communication Standard 29 CFR 1910.1200 and Superfund Amendments and Reauthorization
Act (SARA) of 1986 Public Law 99-499
End of the document.
|