MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 1 ?Identification
Strong Steel Stick Renewal Composite
Product Name:
60159, C60159
Part Number:
Filled Epoxy resin
Chemical Name:
A hand kneadable, ready to use stick designed for stopping leaks and
Product Use:
permanently fill holes in metal, concrete, wood, fiberglass, and ceramics.
LPS Laboratories, 4647 Hugh Howell Rd., Tucker, GA, USA 30084
Manufacturer Information:
1 770-243-8800
TEL:
1-800-424-9300 Chemtrec;
Emergency Telephone Number:
Outside U.S.: (703) 527-3887
1 770-243-8899
FAX:
http://www.lpslabs.com
Website:
PLAIN LANGUAGE HAZARD SUMMARY
Material Safety Data Sheets can be confusing. Federal and State laws require us to include a great deal of technical
information that probably won't help the non-professional. LPS includes this "PLAIN LANGUAGE HAZARD
SUMMARY" to address the questions and concerns of the average worker. If you have additional health, safety or
product questions, don't hesitate to call us at 800/241-8334.
Worker Toxicity
Strong Steel Stick Renewal Composite is a hand kneadable, ready to use stick for fast emergency repairs. It is a gray
and black putty stick with a sulfur odor. This product may cause eye and/or skin irritation, it is good practice to use
appropriate eye protection while machining the cured product. It is also recommended to use chemically resistant
gloves while kneading. Do not ingest. For more exposure and first aid information, refer to MSDS Sections 2, 8 and
11.
Flammability
Strong Steel Stick Renewal Composite is non-flammable; however, if ignited, irritating gases may be produced. See
sections 5 for more information.
Disposal
Dispose of in accordance with local, state, provincial and federal regulations. See section 13 for more details.
Page 1 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 2 ?Hazards identification
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
Emergency Overview: CAUTION: Irritating to eyes and skin.
Primary route(s) of entry: Skin and Eye contact.
Potential Acute Health Effects:
Irritating to eyes. This product is an inert solid. If product gets in eye, irritation may result similar to that of
Eyes:
any foreign object in eye.
Possibly an irritant and skin sensitizer.
Skin:
None.
Inhalation:
Product has a low order of acute oral toxicity, but ingestion may cause gastrointestinal irritation.
Ingestion:
Potential Chronic Health Effects:
Carcinogenic Effects: NTP: No OSHA: No ACGIH: No
Mutagenic Effects: None
Teratogenic Effects: None
Medical conditions aggravated by exposure: Dermatitis and eczema.
Signs and Symptoms
Symptoms include, stinging, tearing, redness, and swelling of eyes. Repeated or prolonged skin contact can cause
skin dryness or cracking. If ingested, symptoms include cough and irritation.
Section 3 ?Composition / Information on Ingredients
Component CASRN Weight Percent
Glycidyl Ethers of Bisphenol A Resins 25068-38-6 10-30%
Crystalline Silica 14808-60-7 1-5%
Tri (dimethylaminomethyl) phenol 90-72-2 0.5-1.5%
Page 2 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 4 ?First Aid Measures
Remove as one would any foreign object. If irritation persists seek medical attention.
Eyes:
Remove contaminated shoes and clothing. Clean affected area thoroughly with mild soap and water. Do
Skin:
not use ointments. Seek medical attention if irritation persists.
Not applicable.
Inhalation:
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
Ingestion:
an unconscious person. If spontaneous vomiting is about to occur, place victim's head below knees. If
victim is drowsy or unconscious, place on the left side with head down. Do not leave victim unattended.
Seek medical attention immediately.
Section 5 ?Fire Fighting Measures
Products of Combustion: Carbon monoxides, aldehydes, acids, oxides of sulfur and nitrogen.
Firefighting media: Extinguish with water spray, dry chemical, or foam. Firefighting personnel required to use
respiratory and eye protection.
Sensitivity to Impact: None. Sensitivity to Static Discharge: None.
Protection Clothing (Fire): Firefighters must use full bunker gear including NIOSH-approved positive pressure self-
contained breathing apparatus to protect against potential hazardous combustion or decomposition products and
oxygen deficiencies.
Section 6 ?Accidental Release Measures
Land Spill: Recover free product and place in suitable container for disposal. Observe local,
Containment
state, and federal regulations.
Procedures
Water Spill: Recover solid from water for solid waste disposal.
Recover free product and place in suitable container for disposal.
Clean-Up Procedures
None.
Evacuation
Procedures
Wear appropriate protective equipment during cleanup.
Special Procedures
Section 7 ?Handling and Storage
Handling: Do not allow material to come into contact with eyes. Wear appropriate protective equipment during
handling. Wash thoroughly after handling.
Storage: Keep in original container. Store at room temperature.
Page 3 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 8 ?Exposure Controls / Personal Protection
OSHA OSHA ACGIH- ACGIH-
Component CASRN NIOSH REL
TWA-PEL STEL TLV STEL
Glycidyl Ethers of Not Not Not Not Not
25068-38-6
Bisphenol A Resins Established Established Established Established Established
10 mg/m3 0.05 mg/m3 10 mg/m3
Not Not
Crystalline Silica 14808-60-7 respirable respirable respirable dust
Established Established
dust dust 10H CA TWA
Tri (dimethylaminomethyl) Not Not Not Not
90-72-2 5 ppm
phenol Established Established Established Established
Normal room ventilation is usually adequate. If necessary, use appropriate general and/or
Engineering
local exhaust ventilation to keep exposures below the exposure guidelines above.
measures
Personal protective equipment
If machining the cured product, it is recommended to wear dust-proof goggles.
Eye protection
Use chemical resistant gloves (i.e., neoprene, rubber latex, or butyl glove) conforming to
Hand protection
appropriate regulations. Please observe the instructions regarding permeability and
breakthrough time that are provided by the supplier of the gloves.
Typical use of this product under normal conditions does not require the use of respiratory
Respiratory
protection.
protection
Wash throughly after handling. Have eye-wash facilities immediately available.
General Hygiene
Considerations
Page 4 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 9 ?Physical and Chemical Properties
Viscous Paste Gray
Appearance: Color:
Sulphurous Not Applicable
Odor/Taste: Evaporation Rate:
Insoluble None
Solubility Description: Flash Point:
Not Determined > 200癈 (392癋)
Odor Threshold: Decomposition Temperature:
Not Applicable TCC
Boiling Point: Flash Point Method:
2.18 Not Determined
Specific Gravity (Water=1): Auto Ignition Temperature (癈):
Non-Volatile Not Applicable
Vapor Density (air=1): Partition Coefficient (octanol/water):
0.79 mmHg <1%
Vapor Pressure: Volatiles:
Not applicable Not Applicable
pH: Viscosity:
LOWER: None Not Determined
Flammable limits Melting Point (癈):
UPPER: None
(estimated):
Section 10 ?Chemical Stability and Reactivity
Product is stable under recommended storage conditions.
Chemical Stability:
Keep away from open flames, hot surfaces and ignition sources.
Conditions to Avoid:
Strong oxidizing agents. Amines.
Incompatibility:
These products are carbon monoxides, aldehydes, acids, oxides of sulfur
Hazardous Decomposition:
and nitrogen.
Will not occur.
Hazardous Polymerization:
Section 11 ?Toxicological Information
A: General Product Information
LD50/dermal/rabbit >13700 mg/kg
B: Component Analysis
Component CASRN LC-50 LD-50
Glycidyl Ethers of 5000 mg/kg/oral/rat
25068-38-6 Not Established
Bisphenol A Resins 20000mg/kg/dermal/rabbit
Crystalline Silica 14808-60-7 Not Established Not Established
Tri (dimethylaminomethyl) phenol 90-72-2 Not Established 1630mg/kg/oral/rat
Page 5 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
Section 12 ?Ecological Information
Unknown Not readily biodegradable.
Mobility: Persistence and
degradability:
Unknown Harmful to the aquatic
Bioaccumulative Other adverse effects:
environment. May cause
potential:
long-term adverse effects in
the aquatic environment.
Section 13 ?Disposal Considerations
None.
Waste Status:
Waste must be disposed of in accordance with national, state, provincial, federal, regional and local
Disposal:
environmental control regulations.
Chemical additions to, processing of, or otherwise altering this material may make this waste
Note:
management information inaccurate, incomplete, or otherwise inappropriate. Furthermore, state and
local waste disposal requirements may be more restrictive than federal laws and regulations.
Section 14 ?Transportation Information
Not regulated by any mode of transportation.
Section 15 ?Regulatory Information
U.S. Federal Regulations
RCRA Hazardous Waste No.: None
Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): None.
Toxic Substances Control Act (TSCA):
All components of this product are TSCA inventory listed and/or are exempt.
Superfund Amendments and Reauthorization Act (SARA) Title III
SARA Section 311/312 (40 CFR 370) Hazard Categories:
Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard
This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313
(40 CFR 372): No individual section 313 component is present at or above 1%
Section 112 Hazardous Air Pollutants (HAPs): None
Page 6 of 7
MATERIAL SAFETY DATA SHEET
STRONG STEEL STICK
Renewal Composite
Revision: 3 Revision Date: 10/21/08 Supercedes: 1/31/03
State Regulations
New Jersey RTK:
Magnesium Silicate Hydrate 14807-96-6 Iron / Silicon / Titanium / Aluminum Alloy 7439-89-6
Sodium Calcium Magnesium Silicate 65997-17-3 Glycidyl Ethers of Bisphenol A Resins 25068-38-6
Nypheline Syenite 37244-96-5
California: This product does not contain chemical(s) known to the State of California to cause cancer, birth defects
or reproductive harm.
California and OTC States: This product is not regulated consumer regulations.
International Regulations
Canadian Environmental Protection Act: All of the components of this product are included on the Canadian
Domestic Substances list (DSL).
Canadian Workplace Hazardous Materials Information System (WHMIS):
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
WHMIS Classification:
Class D2B
Other Regulations
Montreal Protocol listed ingredients: None.
Stockholm Convention listed ingredients: None.
Rotterdam Convention listed ingredients: None.
RoHS Compliant: Yes.
Section 16 ?Other Information
HMIS 1996 HMIS III NFPA
MSDS# 60159
Health: 1 Health: [/]1 Flammability
Responsible Name:
Clea Johnson
Flammability: 1 Flammability: 1 1
2
Regulatory Affairs Coordinator
1
Health Reactivity
0
Reactivity 0 Physical Hazard: 0
Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier
nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained
herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee
that these are the only hazards that exist.
Clea Johnson, Regulatory Affairs Coordinator
LPS Laboratories, A division of Illinois Tool Works
Page 7 of 7
|