MATERIAL SAFETY DATA SHEET
Company Name: Superior Stone Products, Inc.
Product Name: Superior Acry-Tyte (Various Colors)
Issue Date: 5/16/08
Revision Date: 12/3/08
MSDS Number: SUP-15500
Section I ?Chemical Product and Company Identification
Product Identifier: Superior Acry-Tyte (Various Colors)
This MSDS covers the following Superior Acry-Tyte Colors
Almond Amarillo Aquamarine Arctic White Aztec Bamboo Battleship Gray
Black Black Anubis Black Night Brick Butterscotch Camelback Candell
Caribou Celadon Champagne Charcoal Clear Cobalt Cotton
Dandelion Desert Gold Eclipse Espresso Fire Engine Red Goldenrod Graphite Gray
Gunmetal Honey Honeycomb Ivory Java Khaki Macadamia
Mahogany Midnight Blue Midnight Green Mocha Gray Neutral Olive Oyster Shell
Pearl Pewter Polar White Portabella Robins Egg Rococco Rustic Gold
Sable Saffron Sage Sand Dune Santa Fe Shingle Silver Sky
Smoke Gray Starlite Gray Starlite White Stucco Tan Taupe Tortoise
Tumbleweed Vanilla Wrought Iron
Product Description: Part 1 - Acrylic / Part 2 - Organic Peroxide
24 Hour Emergency Telephone Number:
Manufacturer:
CHEMTREC 800-424-9300
Superior Stone Products, Inc.
8580 Byron Commerce Drive
Byron Center, MI 49315
616-583-0171
Section II ?Composition/Information on Ingredients
If present, IARC, NTP and OSHA carcinogens and chemicals subject to the reporting requirements of SARA title III
Section 313 are identified in this Section.
Part 1
Ingredient CAS# % (By Weight) OSHA PEL ACGIH TLV
Methyl Methacrylate 80-62-6 55-75% 100 PPM 50 PPM
Poly (Methyl Methacrylate 9010-88-2 10-30% Not Established Not Established
Ethyl Methacrylate)
Triethylene Glycol 109-16-0 1-15% Not Established Not Established
Dimethacrylate Esters
Amorphus Fumed Silica 112945-52-5 <10% 5 mg/m3 (Respirable)* 5 mg/m3 (Respirable)*
15 mg/m3 (Total )* 15 mg/m3 (Total)*
* Particulates Not Otherwise Regulated
Part 2
Ingredient CAS# % (By Weight) OSHA PEL ACGIH TLV
Benzoyl Peroxide 94-36-0 <15% 5 mg/m3 5 mg/m3
Bisphenol A/Epichlorohydrin 25068-38-6 <70% Not Established Not Established
Based Epoxy Resin
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Company Name: Superior Stone Products, Inc.
Product Name: Superior Acry-Tyte (Various Colors)
Issue Date: 5/16/08
Revision Date: 12/3/08
MSDS Number: SUP-15500
Section III ?Hazards Identification/Possible Routes of Entry
Part 2 - Organic Peroxide
Part Part Per
eroxide
Caution: Part 1 - Flammable Liquid
Ingestion: May cause irritation, a burning sensation of the mouth throat and gastrointestinal tract and abdominal pain.
Skin: May cause skin irritation, skin sensitization or defatting. May be readily absorbed through the skin.
Eye: May cause eye irritation. May cause lachrymation (tears), blurred vision and redness.
Inhalation: High concentration is irritant to the respiratory tract and may cause dizziness, headache and anesthetic
effects and/or nausea. Aspiration of material into lungs may result in chemical pheumonitis which may be fatal.
HMIS Codes:
Flammability: 3
Health: 2
Physical Hazard: 2
Personal Protective Index: X
Section IV ?First Aid Measures
If Swallowed: Do not induce vomiting unless directed by a medical professional. Give victim 2 glasses of water if
conscious. Never give anything by mouth to an unconscious person. Prevent aspiration of vomit. Turn victims head to
the side. Seek immediate medical attention.
Skin Contact Remove contaminated clothing. Immediately wash area with soap and water. Continue irrigating skin
Contact:
until medical assistance is obtained. Seek immediate medical attention if irritation develops or persists.
If Inhaled: Remove to fresh air. If breathing is labored or has stopped artificial respiration may be provided by a
certified individual at the direction of a medical professional. Seek immediate medical attention.
Eyes: Hold eyelids apart and immediately flush with water for at least 15 minutes. Seek immediate medical attention.
If medical attention is not immediately available continue irrigation until patient receives medical care.
Section V - Fire Fighting Measures
Part 1 Part 2
Flash Point: 11.5 C (52.7 F) (Estimated) Flash Point: >84oC (>184oF) (Estimated)
o o
Class IB Flammable Liquid May be Combustible when dry
Hazardous Products of Combustion: Acrid smoke/fumes/carbon monoxide and other toxic vapors may be
generated during combustion. Do not allow runoff from fire fighting to enter drains or water courses.
Extinguishing Agents: Use water fog, foam, dry chemical, dry sand, limestone powder or carbon dioxide. Water
spray may be used to cool down tanks in proximity to the fire.
Special Fire Fighting Procedures: Utilize full protective clothing and self-contained breathing apparatus.
Fire Fighting Pr
Unusual Fire And Explosion Hazards: Intense heat may cause nearby containers to erupt due to hazardous
Fire
polymerization.
Section VI - Accidental Release Measures
Procedure For Cleanup: Ventilate area. Eliminate sources of ignition. Use self contained breathing apparatus and
For
chemically protective clothing. Wear suitable protective clothing, cloves and eye/face protection. Absorb spill with an
absorbent material such as sawdust, vermiculite or sand and place in a closed chemical container. If large spill, dike the
area to prevent this material from entering water systems or sewers. Prevent contamination of soil and water. Dispose
of material in accordance with federal, state/provincial and local regulations.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Company Name: Superior Stone Products, Inc.
Product Name: Superior Acry-Tyte (Various Colors)
Issue Date: 5/16/08
Revision Date: 12/3/08
MSDS Number: SUP-15500
Section VII - Handling and Storage
General Procedures: Read and observe all precautions on product label and material safety data sheet before
handling. Refer to product label or manufactures technical bulletins for the proper use and handling of this material.
Avoid contact with skin, eyes and clothing. Do not use or store near flame, sparks or hot surfaces. Use only in well
ventilated area. Keep container closed tightly and store in a cool, dry, well ventilated area. Do not weld, heat or drill
container.
Storage Temperature: 50o - 100o F
Temperature:
Shelf Life: One (1) year when stored at room temperature.
Section VIII - Exposure Controls/Personal Protection
Respiratory Protection: When exposures can not be reduced below the PEL, respiratory protection may be required.
Use only a NIOSH/MSHA approved respiratory protection if exposed to vapors above the PEL.
Ventilation: If the PEL is exceed, provide explosion proof ventilation to reduce these levels.
Protective Gloves: Wear appropriate protective gloves and clothing to prevent skin contact.
Eye Protection: Wear safety glasses, face shield or chemical goggles when handling this material.
Section IX ?Physical and Chemical Properties
Part 2
Part Part
Part I
Form: Paste Like Form: Paste Like
Appearance: Opaque Appearance: Opaque
Odor: Characteristic strong and acrid odor Odor: Characteristic
Boiling Point: >100oC (>212oF) (estimated) Boiling Point: >150oC (<302oF) (estimated)
Point: Point:
Vapor Pressure: <28.00 mmHg @ 70oF (20oC) Vapor Pressure: NA
Pressure: Pressure:
Vapor Density: ~3.5 (water = 1) Vapor Density: >1
Density: Density:
Solubility in Water: Slightly Soluble Solubility in Water: Insoluable
Water: Water:
VOC Content: 504 - 687 g/L (estimated) VOC Content: Negligible
Section X - Stability and Reactivity
Stability: Stable under normal use conditions.
Hazardous Polymerization: May occur by contamination of product or depletion of inhibitor.
Polymerization:
Incompatibility (materials to avoid): Oxidizing agents and reducing agents. Material is a strong solvent and can
soften paints and rubber.
Hazardous Decomposition or Combustion Products: Heating of this product may cause irritating, acrid fumes.
Hazardous gases/vapors including carbon monoxide, carbon dioxide and smoke may develope.
Section XI - Toxicological Information
Acute Oral Toxicity: No data available for this product.
Toxicity
oxicity:
Acute Dermal Toxicity: No data available for this product.
Toxicity
oxicity:
Acute Inhalation Toxicity: No data available for this product.
Toxicity
oxicity:
Section XII - Ecological Information
No data available for this product.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Company Name: Superior Stone Products, Inc.
Product Name: Superior Acry-Tyte (Various Colors)
Issue Date: 5/16/08
Revision Date: 12/3/08
MSDS Number: SUP-15500
Section XIII - Disposal Considerations
Dispose of container and unused contents in accordance with federal, provincial, state and local requirements. For further
information, contact your provincial, state or local solid waste agency or the United States Environmental Protection
Agency's RCRA hotline (800-424-9346).
Section XIV - Transportation Information
Transportation
United States Department of Transportation (DOT)
Shipping Name: Adhesive
Hazard Class: 3
NA/UN Number: 1133
Packing Group: II
International Maratime Organization (IMO)
Shipping Name: Adhesive
Hazard Class: 3
NA/UN Number: 1133
Packing Group: II
EmS: F-E, S-D
International Air Transport Organization (IMO)
Transport
Shipping Name: Adhesive
Hazard Class: 3
NA/UN Number: 1133
Packing Group: II
ERG Code: 3L
Please refer to U.S. DOT, IMO and IATA regulations for more information.
Section XV - Regulatory Information
Federal Regulations:
Regulations:
Title
Sara Title III - Section 311
Immediate (Acute) Health Effects: Yes
Chronic (Delayed) Health Effects: No
Fire Hazard: Yes
Sudden Release of Pressure Hazard: No
Reactivity: Yes
Title
Sara Title III - Section 313
Methyl Methacrylate (80-62-6)
Benzoyl Peroxide (94-36-0)
Canadian Ingredient Disclosure List:
Methyl Methacrylate (80-62-6)
Triethylene Glycol Dimethacrylate Esters (109-16-0)
Benzoyl Peroxide (94-36-0)
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Company Name: Superior Stone Products, Inc.
Product Name: Superior Acry-Tyte (Various Colors)
Issue Date: 5/16/08
Revision Date: 12/3/08
MSDS Number: SUP-15500
WHMIS Classification:
Class B - Division 2
Class D - Division 2 - Subdivision B
Section XVI - Other Information
MANUFACTURER DISCL AIMER This information is provided in good faith and is correct to the best of Superior
MANUFACTURER DISCLAIMER AIMER:
Stone Products' knowledge as of the date hereof; however, Superior Stone Products makes no representation as to its
completeness or accuracy. Customers are encouraged to make their own determination as to the suitability of this
product for their purpose prior to use. Superior Stone Products disclaims responsibility to damages of any kind resulting
from the use of this information. THERE ARE NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING
THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS INFORMATION OR TO
THE PRODUCT IT DESCRIBES.
Page 5 of 5
|