Safety hazards: Not known.
Health hazards: Eye irritant. Skin irritant. May cause sensitisation in susceptible individuals by
skin contact. Irritant if swallowed.
Environmental hazards: See section 12.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical
characterization: Mixture of modified epoxy resin with filler.
Hazardous Ingredients: Epoxy resin
CAS No: 25068-38-6
Hazard symbols: Xi
R-phrases: R36/R38-R43
% Concentration: <40%
4. FIRST AID MEASURES
Immediate treatment
While eyes are held open gently flush with water for 15 minutes.
Eye contact:
Remove all contaminated clothing and shoes. Wash skin thoroughly with soap
Skin contact:
and water. Avoid solvents. Seek medical advice if irritation persists.
Remove to fresh air. Supply oxygen and / or artificial respiration as needed.
Inhalation:
Seek medical assistance as needed particularly in case of allergic response.
Do not induce vomiting. Contact doctor immediately. Rinse mouth and give
Ingestion:
glass of water.
Information for physicians: Treat symptomatically. Contact Poisons Information Center as needed.
Allergic response as dermatitis or asthma-like symptoms / wheezing may occur
after a single significant exposure and sensitization may occur after single or
multiple minor exposures, depending on the individual.
MASTERTOP 1110 AQUA BLUE PART A Page 1 of 6 Revision No: 1 on 14 July 2006
Printed on 2/11/2006
MATERIAL SAFETY DATA SHEET
5. FIRE FIGHTING MEASURES
Special hazards: In case of fire oxides of carbon, nitrogen and other toxic gases are formed.
Protective equipment: Fire fighters should wear self-contained breathing apparatus in enclosed areas.
Extinguishing agents: Water spray, foam, carbon dioxide, dry powder.
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate personal protection and ensure adequate ventilation.
Personal precautions:
Prevent discharge into drains, sewers and waterways.
Environmental precautions:
Absorb in inert dry material. Do not sweep up or wash down with water.
Method for cleaning up:
7. HANDLING AND STORAGE
Handling: Keep containers tightly closed when not in use.
Requirements for storage rooms: Keep dry and preferably keep cool.
Additional information: Keep separate from oxidizing materials.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Use mechanical mixing equipment and provide long handled brush
Technical measures:
for washing tools. Use only in well ventilated areas.
Personal protection
Respiratory protection: Use respiratory equipment in accordance to local safety
requirements.
Eye protection: Wear safety glasses, which comply with local standards.
Hand protection: Wear gloves or suitable protective creams.
Body protection: Wear overalls or other suitable protective clothing.
MASTERTOP 1110 AQUA BLUE PART A Page 2 of 6 Revision No: 1 on 14 July 2006
Printed on 2/11/2006
MATERIAL SAFETY DATA SHEET
9. PHYSICAL AND CHEMICAL PROPERTIES
Stability: Stable under normal storage and usage temperatures.
Hazardous reactions
Avoid heat, and sources of ignition.
(conditions to avoid):
Materials to avoid: Avoid oxidizing materials.
Hazardous decomposition products: None under normal storage and use temperatures.
MASTERTOP 1110 AQUA BLUE PART A Page 3 of 6 Revision No: 1 on 14 July 2006
Printed on 2/11/2006
MATERIAL SAFETY DATA SHEET
11. TOXICOLOGICAL INFORMATION
Acute toxicity (lethal dose)
LD50 oral Albino rat
Dose: n.d.
Additional information: n.d.
Information applies to: Mastertop 1110 Aqua Blue Part A
LC50 inhalation Albino rat
n.d.
Dose:
n.a.
Additional information:
Information applies to: Mastertop 1110 Aqua Blue Part A
Dispose in accordance with all local and governmental regulations.
Set resin and hardener can be disposed to landfill.
14. TRANSPORT INFORMATION
This product is not classified as a dangerous good under any transport regulations.
Road transport ADR / RID
n.as.
Class:
n.as.
Number/letter:
n.as.
Warning sign:
n.as.
Hazard No:
n.as.
UN No:
Maritime / Air transport IMDG
n.as.
UN No:
n.as.
PG:
n.as.
Class:
n.as.
IMDG code page:
MASTERTOP 1110 AQUA BLUE PART A Page 5 of 6 Revision No: 1 on 14 July 2006
Printed on 2/11/2006
MATERIAL SAFETY DATA SHEET
15. REGULATORY INFORMATION
Required.
Classification:
Xi- Irritant.
Hazard labels:
R36/R38- Irritating to eyes and skin.
R-phrases:
R43- May cause sensitization by skin contact.
S28- After contact with skin, wash immediately with plenty of water and soap.
S-phrases:
S37/39- Wear suitable gloves and eye/face protection.
National regulatory information:
n.as.
Other regulations, restrictions and prohibitions:
n.a.
16. OTHER INFORMATION
Mastertop 1110 Aqua Blue Part A is part of a two-component epoxy resin system.
Fully cured epoxy resin compositions, comprising mixed Part A and Part B, are considered non-toxic, non-
irritant and non-sensitizing to the skin.
Contact with the individual components during mixing and application should be minimised.
Reason for Issue: New format based on National Code of Practice for the preparation of MSDS ?2nd edition
[NOHSC:2011(2003)]. Change of company name.
This MSDS summarises our best knowledge of the health and safety hazard information of the product and
how to safely handle and use the product in the workplace. Each user should read this MSDS and consider
the information in the context of how the product will be handled and used in the workplace including in
conjunction with other products. If clarification or further information is needed to ensure that an appropriate
risk assessment can be made, the user should contact this company. Our responsibility for products sold is
subject to our standard terms and conditions, a copy of which is sent to our customers and is also available
on request. All information contained in this MSDS is as accurate and up-to-date as possible. No warranty
expressed or implied is made as to its accuracy, reliability or completeness.
MASTERTOP 1110 AQUA BLUE PART A Page 6 of 6 Revision No: 1 on 14 July 2006