Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1344-28-1 409-21-2 25068-38-6

File Name: 1344-28-1_409-21-2_25068-38-6.asp

                                                                      Similar to OSHA 1218-0072




Material Safety Data Sheet

1.0 Identity and Manufacturer

Identity: Epoxy bonded abrasive products

Manufacturer: Anchor Abrasives Co. Phone: (877) 596-3100
7651 W. 185th Street (8:00 am - 4:00 pm CST)
Tinley Park, IL 60477 USA

Date Prepared: October 1, 2005 Reaffirmed 2/26/09

2.0 Hazardous Ingredients / Identity Information

Component CAS # OSHA PEL ACGIH TLV Wt. %

15 mg/m3 10 mg/m3
Aluminum Oxide 1344-28-1 50-90
15 mg/m3 10 mg/m3
Silicon Carbide 409-21-2 50-90
Cured Epoxy Resin 25068-38-6 n/a n/a 10-40
15 mg/m3 15 mg/m3
Inert Fillers n/a 0-40

3.0 Physical / Chemical Characteristics

Boiling Pt. Specific Gravity:
n/a 1.5 - 3.0 g/cc
Vapor Pressure: Melting Point:
n/a n/a
Vapor Density: Evaporation Rate:
n/a n/a
Solubility In Water: Insoluble
Appearance and Odor: White to Grey solid, no odor.

4.0 Fire and Explosion Hazard Data

Flash Point: Flammable Limits: For Dust
n/a
LEL: .025 oz./ft3
UEL: n/a
Extinguishing Media: Water, Foam, Dry Chemical, CO2

Special Procedures: MSHA/NIOSH approved self-contained breathing apparatus when in an
enclosed area. Avoid inhalation of gases.

Unusual Hazards: Organic dust/air mixtures are highly flammable. Avoid dust
accumulations and sources of ignition.




1
5.0 Reactivity Data
Stability: Stable
Conditions to avoid: None Known
Incompatibility: Strong Organic Oxidizers
Hazardous Decomposition: n/a
Hazardous Polymerization: Will not occur

6.0 Health Hazard Data
Inhalation: TLV 10 mg/m3
Routes of entry: Skin: n/a Ingestion: n/a
Health Hazards: Acute: Inhalation of dust generated during use may cause coughing or
shortness of breath.
Chronic: Prolonged exposure above TLV may cause respiratory
problems.
Carcinogenicity: n/a
Signs and Symptoms of Overexposure: Choking sensation
Medical conditions aggravated by overexposure: Pre-existing Pulmonary conditions
which are aggravated by nuisance dust.
Emergency and First Aid Procedures: Remove to dust free area.

7.0 Precautions for Safe Handling and Use

Steps to be taken in case of spill: Collect in most convenient and safe manner for disposal.
Waste Disposal Method: In accordance with Federal, State, and Local regulations as a dry
solid.
Storage / Handling Precautions: Handle in accordance with ANSI B7.1 "Safety Requirements
for the Use, Care and Protection of Abrasive Wheels"
Other Precautions: Inspect grinding wheel for damage upon arrival and prior to mounting.

8.0 Control Measures

Respiratory Protection: NIOSH approved respiratory protection recommended if TLV is
exceeded.
Ventilation: Local: To remove dust during use
Gen.: Mechanical Dust collection system
Spec.: n/a
Protective Gloves: Suitable for grinding
Eye Protection: Safety glasses are highly recommended.
Other Protection: As required for a grinding operation.
Work/Hygienic Practices: n/a

Disclaimer: All information and recommendations appearing on this Safety Data sheet are based upon
data believed to be reliable. It is the users responsibility to determine the suitability for their own use and
to comply with all applicable regulations. No guarantee, either expressed or implied is made by Anchor
Abrasives Co. as to the safety and toxicity of the product, nor does Anchor Abrasives Co. assume any
liability arising from the use of this product.




2

Search    ENTER KEYWORD
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
25068-38-6_15625-89-5.asp 25068-38-6 15625-89-5
26761-45-5_25068-38-6_84-74-2.asp 26761-45-5 25068-38-6 84-74-2
25068-38-6_68609-97-2.asp 25068-38-6 68609-97-2
14807-96-6_25068-38-6_65997-17-3_90-72-2_14808-60-7_67762-90.asp 14807-96-6 25068-38-6 65997-17-3 90-72-2 14808-60-7 67762-90-7
120-55-8_27138-31-4_13463-67-7_1317-65-3_25068-38-6_80-15-9.asp 120-55-8 27138-31-4 13463-67-7 1317-65-3 25068-38-6 80-15-9
1477-55-0_25068-38-6_2855-13-2_616-47-7_68738-77-2.asp 1477-55-0 25068-38-6 2855-13-2 616-47-7 68738-77-2
25068-38-6_90-72-2.asp 25068-38-6 90-72-2
25068-38-6_556-67-2.asp 25068-38-6 556-67-2
25068-38-6_28064-14-4_67762-90-7_7429-90-5.asp 25068-38-6 28064-14-4 67762-90-7 7429-90-5
39382-25-7_25852-47-5_9004-81-3_9002-88-4_9002-84-0_13463-67-7.asp 39382-25-7 25852-47-5 9004-81-3 9002-88-4 9002-84-0 13463-67-7 80-15-9 613-48-9 81-07-2 112945-52-5 25068-38-6
25068-38.asp 25068-38-6
25068-38-6_37237-76-6_9046-10-0.asp 25068-38-6 37237-76-6 9046-10-0
25068-38-6.asp 25068-38-6
25068-38-6_141-78-6.asp 25068-38-6 141-78-6
25068-38-6_112945-52-5_147-14-8_00090-72-2_13463-67-7.asp 25068-38-6 112945-52-5 147-14-8 00090-72-2 13463-67-7
25068-38-6_2210-79-9_26376-86-3_37244-96-5_8031-18-3.asp 25068-38-6 2210-79-9 26376-86-3 37244-96-5 8031-18-3
25068-38-6_2425-79-8_80-05.asp 25068-38-6 2425-79-8 80-05-7
17557-23-2_68609-97-2_38-43-5_15625-89-5.asp 17557-23-2 68609-97-2 38-43-5 15625-89-5
25068-38-6_258064-14-4_112945-52-5_1344-09-8.asp 25068-38-6 258064-14-4 112945-52-5 1344-09-8
25068-38-6_26950-63-0_112-57-2.asp 25068-38-6 26950-63-0 112-57-2
7440-21-3_14807-96-6_7439-89-6_7440-32-6_25068-38-6_074-00.asp 7440-21-3 14807-96-6 7439-89-6 7440-32-6 25068-38-6 074-00-8
01-11-0_25068-38-6_90-72-2_71074-89-0.asp 01-11-0 25068-38-6 90-72-2 71074-89-0
25068-38-6_68609-97.asp 25068-38-6 68609-97-2
9072-62-2_25068-38-6_67924-34-9_12001-26-2_1317-65-3_14808-60.asp 9072-62-2 25068-38-6 67924-34-9 12001-26-2 1317-65-3 14808-60-7
25068-38-6_26761-45-5_16096-31.asp 25068-38-6 26761-45-5 16096-31-4
25068-38-6.asp 25068-38-6
471-34-1_25068-38-6_25085-99-8_2210-79-9_84852-15-3_546-93.asp 471-34-1 25068-38-6 25085-99-8 2210-79-9 84852-15-3 546-93-0
1305-62-0_25068-38-6.asp 1305-62-0 25068-38-6
21645-51-2_25068-38-6_13463-67-7_28906-96-9_1333-86-4_90-72.asp 21645-51-2 25068-38-6 13463-67-7 28906-96-9 1333-86-4 90-72-2 100-51-6 100-42-5
25068-38-6_7727-43-7_471-34-1_1309-38-2_112945-52-5_101359-87-9.asp 25068-38-6 7727-43-7 471-34-1 1309-38-2 112945-52-5 101359-87-9 1327-36-2 111-40-0 13474-96-9 13463-67-7
25068-38-6_26950-63-0_112-24-3.asp 25068-38-6 26950-63-0 112-24-3
80-62-6_9010-88-2_109-16-0_112945-52-5_94-36-0_25068-38-6.asp 80-62-6 9010-88-2 109-16-0 112945-52-5 94-36-0 25068-38-6
25068-38-6_14808-60.asp 25068-38-6 14808-60-7
25068-38-6_1477-55-0.asp 25068-38-6 1477-55-0
25068-38-6_14808-60-7_108-10-1_1330-20-7_68515-49-1_100-41-4.asp 25068-38-6 14808-60-7 108-10-1 1330-20-7 68515-49-1 100-41-4
25338-55-0_25068-38.asp 25338-55-0 25068-38-6
25068-38-6_9004-87-9_13983-17-0_13463-67-7_16389-88-1_68131-74-8.asp 25068-38-6 9004-87-9 13983-17-0 13463-67-7 16389-88-1 68131-74-8
25068-38-6.asp 25068-38-6
n1433624010.asp N/A
25068-38-6_68609-97-2_64742-94-5_100-51-6_2855-13-2_112-24.asp 25068-38-6 68609-97-2 64742-94-5 100-51-6 2855-13-2 112-24-3 90-72-2
8010-01-3_25068-38-6_110-43-0_64742-95-6_13983-17-0_37244-96-5.asp 8010-01-3 25068-38-6 110-43-0 64742-95-6 13983-17-0 37244-96-5 1344-28-1 107-98-2 68424-41-9 68443-08-3
25068-38-6_471-34-1_7727-43-7_1317-61-9_28906-96-9_1332-58.asp 25068-38-6 471-34-1 7727-43-7 1317-61-9 28906-96-9 1332-58-7 14808-60-7 1675-54-3
9046-10-0_25068-38-6.asp 9046-10-0 25068-38-6
25068-38-6.asp 25068-38-6
25068-38-6_68609-97-2.asp 25068-38-6 68609-97-2
01-11-0_25068-38-6_90-72-2_71074-89-0_13463-67-7.asp 01-11-0 25068-38-6 90-72-2 71074-89-0 13463-67-7
1344-28-1_409-21-2_25068-38-6.asp 1344-28-1 409-21-2 25068-38-6
1330-20-7_100-41-4_117-81-7_108-88-3_25068-38-6_108-65-6.asp 1330-20-7 100-41-4 117-81-7 108-88-3 25068-38-6 108-65-6
9072-62-2_25068-38-6_67924-34-9_001675-54-3.asp 9072-62-2 25068-38-6 67924-34-9 001675-54-3
1333-86-4_14808-60-7_25068-38-6_71011-27-3_7440-38-2_7439-92.asp 1333-86-4 14808-60-7 25068-38-6 71011-27-3 7440-38-2 7439-92-1 106-89-8 1317-65-3


HBCChem,Inc

Chemical Information Net chemcas.orgCopyright Reserved

Trading Lead

Leputech HPLC Laboratory