Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
MSDS Date: 1-5-05
Product Name: KEMPEROL EP-Primer Component A
Manufacturer: Kemper System, Inc.
I. Product and Company Description
Kemper System, Inc.
1182 Teaneck Road
Teaneck, N.J. 07666
Emergency Phone Number:
(800) 424-9300 CHEMTREC
For Product Information:
(800) 541-5455
Product Description:
Priming/Sealing
II. Chemical Composition
Component CAS# %Composition
Bisphenol A-(epichlorhydrin) 25068-38-6 50-100
Neodecanoic acid oxiranylmethyl ester 26761-45-5 10-25
Hexanedioldiepoxypropylether 16096-31-4 10-25
III. Hazards Identification
A. Emergency Overview:
Physical Appearance and Odor:
Yellow liquid with aromatic odor
B. Potential Health Effects:
Acute Eye:
May cause irritation.
Acute Skin:
May cause irritation.
Acute Inhalation:
May cause irritation to the respiratory tract.
Acute ingestion:
-1-
Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
May cause gastrointestinal damage if swallowed.
Chronic effects:
ND
IV. First Aid Measures
First Aid Measures for Accidental Exposure:
Eye Exposure:
Immediately flush eyes with plenty of water. Get medical attention, if irritation persists. Remove contact
lenses after flushing.
Skin Exposure:
Wash affected area with soap and water. Get medical attention if irritation develops or persists.
Inhalation:
Remove to fresh air. Seek medical attention if respiratory irritation develops or if breathing becomes
difficult.
Ingestion:
Give large quantities of water. Never give anything by mouth to an unconscious person. Seek medical
attention.
V. Fire Fighting Measures
Fire Hazard Data:
Flash Point: >100癈 (>212癋)
Method Used: N/A
Ignition Temperature: N/A
Flammability Limits (vol/vol%): Lower: N/A Upper: N/A
Extinguishing Media:
Water fog, foam, or CO2
Special Fire Fighting Procedures:
Ensure that extinguishing agent does not enter waterways after fire.
Unusual Fire and Explosion Hazards:
Product does not present an explosion hazard.
Hazardous Decomposition Materials (Under Fire Conditions):
Combustion produces carbon monoxide, carbon dioxide, carbon and water. Other trace gases that may
be released include phenols, formaldehyde, formic acid, acetone and hydrocarbons.
-2-
Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
VI. Accidental Release Measures
Cleanup and Disposal of Spill:
Wearing proper personal protective equipment (Section VIII), stop the leak, if possible. Keep
unauthorized persons away from spill area. Shut off or remove all ignition sources. Construct a dike to
prevent spill from entering sewers, soil or waterways. Once contained, spread absorbent material over
area.
Dispose of materials according to the applicable Federal, State, or local regulations.
VII. Handling and Storage
Handling:
Use with adequate ventilation.
Storage:
Store in a well-ventilated, cool, dry place. Keep containers closed. Avoid excessive heat and ignition
sources.
VIII. Exposure Controls / Personal Protection
Exposure Guidelines:
Exposure limits
Component ACGIH NIOSH OSHA-PELs
Bisphenol A-(epichlorhydrin) ND ND ND
Neodecanoic acid
ND ND ND
oxiranylmethyl ester
Hexanedioldiepoxypropylethe
ND ND ND
r
Engineering Controls:
Ventilation must be adequate to maintain the ambient workplace atmosphere below the exposure limit(s)
outlined in the MSDS.
Respiratory Protection:
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149.
Always use a NIOSH or EN approved respirator when necessary.
Eye / Face Protection:
Wear appropriate safety glasses with side shields or chemical goggles as described by OSHA's eye and
face protection regulations in 29CFR 1910.133 or European Standard EN166.
Skin Protection:
Chemical resistant gloves recommended, such as neoprene or nitrile rubber. Body covering clothing
should be utilized
-3-
Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
IX. Physical and Chemical Properties
Physical Appearance: Yellow liquid
Odor: Aromatic
pH: ND
Specific Gravity: ND
Water Solubility: Not miscible
Melting Point Range: ND
Boiling Point Range: >200癈 (>392癋)
Vapor Pressure: ND
Density: 1.100 g/cm?br>
X. Stability and Reactivity
Chemical Stability:
Stable under standard use and storage conditions.
Conditions to Avoid:
None
Materials / Chemicals to be Avoided:
None
Hazardous Decomposition Products:
None
Hazardous Polymerization:
Should not occur
XI. Toxicological Information
Acute Oral Toxicity:
ND
Acute Dermal Toxicity:
ND
Acute Inhalation Toxicity:
ND
-4-
Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
Chronic Toxicity:
ND
XII. Ecological Information
Ecotoxicological Information:
Degradation: Not Determined
Accumulation: Not Determined
Fish-Toxicity: Not Determined
Chemical Fate Information:
Not Determined
XIII. Disposal Considerations
Waste Disposal Method:
Discard any product, residue, disposable container or liner in full compliance with federal, state, and local
regulations.
Container Handling and Disposal:
Dispose of container and unused contents in accordance with federal, state, and local regulations.
XIV. Transportation Information
US Department of Transportation Shipping Name:
US Department Proper Shipping Environmentally Hazardous Substance, Liquid, N.O.S.
of Name (Bisphenol A-(epichlorhydrin) epoxy resin)
Transportation 9
Hazard Class
UN 3082
ID Number
III
Packaging Group
XV. Regulatory Information
Federal Regulations:
SARA Title III Hazard Classes:
Fire Hazard: YES
Reactive Hazard: NO
Release of Pressure: NO
Acute Health Hazard: YES
Chronic Health Hazard: NO
SARA Section References:
Section 302 (RQ)
None of the chemicals in this material have an RQ.
-5-
Material Safety Data Sheet
Product: KEMPEROL EP-Primer Component A
Section 302 (TPQ)
None of the chemicals in this product have a TPQ.
Section 313
This substance is not listed under Section 313 of the Emergency Planning and
Community Right-to-Know Act (EPCRA) (also referred to as the Toxics Release
Inventory (TRI).
Toxic Substances Control Act (TSCA): All components are included in the inventory or are not required
to be listed.
Other Regulations:
State:
The components identified with an X are present on the respective state's Right To Know lists:
Component MA PA MI NJ IL
Bisphenol A-(epichlorhydrin)
Neodecanoic acid oxiranylmethyl ester
Hexanedioldiepoxypropylether
California Prop. 65: None of the chemicals in this product are listed.
XVI. Other Information
National Fire Protection Association Hazard Ratings ?NFPA(R):
Health Hazard: 2
Flammability: 1
Reactivity: 0
Key Legend Information:
N/A ?Not Applicable
ND ?Not Determined
ACGIH ?American Conference of Governmental Industrial Hygienists
OSHA ?Occupational Safety and Health Administration
TLV ?Threshold Limit Value
PEL ?Permissible Exposure Limit
TWA ?Time Weighted Average
STEL ?Short Term Exposure Limit
NTP ?National Toxicology Program
IARC ?International Agency for Research on Cancer
The information contained herein is based on the data available to us and is believed to be correct. However
Kemper System, Inc. makes no warranty, expressed or implied regarding the accuracy of these data or the
results to be obtained from the use thereof.
-6-
|