P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
Material Safety Data Sheet
MM-100 Part A
EPOXY SURFACE COAT
In Case of Emergency Contact 928-537-8387 Factor II, Inc.
Factor II Technology urges each customer or recipient of this MSDS to study it carefully to become aware of and
understand the hazards associated with the product. The reader should consider consulting reference works or individuals
who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to the use and understanding of
the data contained in this MSDS.
To promote safe handling each customer or recipient should: (1) notify and furnish its employees, agents, contractors,
customers, and others whom it knows or believes will use this material of the information regarding hazards or safety, (2)
request its customers to notify their employees, customers and other users of the product of this information.
I. PRODUCT IDENTIFICATION
PRODUCT NAME. ?MM-100 Part A
PRODUCT CLASS. Epoxy Resin
CHEMICAL TYPE. Bisphenol A Digycidyl Ether Mixture
II. HAZARDOUS INGREDIENTS
SUBSTANCE NAME &CAS NUMBER OSHA TWA & STEL ACGIH TWA NIOSH TWA
& STEL NIOSH IDLH
Bis-Epi Resin 25068-38-6 NE NE
Butanediol Digycidyl ether 2425-79-8
III. PHYSICAL/CHEMICAL PROPERTIES
APPEARANCE/ODOR Semi paste/White /slight odor
SPECIFIC GRAVITY (DENSITY) 1.64
BOILING POINT >400?br>
VAPOR PRESSURE N/A
% VOLATILE Nil
SOLUBILITY IN WATER Slight
V.O.C N/A
IV. EMERGENCY AND FIRST AID PROCEDURES
IF IN EYE Flush eyes with Luke warm, running water for 15 minutes. Obtain medical attention if irritation
develops.
IF ON SKIN Remove contaminated clothing, wash affected area with mild soap & water twice.
INHALATION Remove to fresh air environment. Obtain medical attention if immediate or delayed irritation,
or asthmatic symptoms occur.
INGESTION Dilute with large amounts of water. Induce Vomiting. Never give anything by
mouth to an unconscious person.
QA-MSDS-07
Revised 5/15/2008
P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
V. OCCUPATIONAL CONTROL RECOMMENDATIONS
EYE PROTECTION Safety glasses or goggles. Plastic face shield should be worn for
complete face protection.
SKIN PROTECTION Impermeable gloves. Avoid skin contact during all handling and usage.
Wash hands and face before eating or handling
tobacco products.
RESPIRATORY PROTECTION. Exhaust ventilation recommended. Observe OSHA regulations for respirator use.
VENTILATION Local exhaust, or well-ventilated work area must be provided.
ADDITIONAL PROTECTIVE MEASURES: Safety showers and eye wash stations should be easily accessible to the
work area. Training is important. Follow all label precautions.
VI. FIRE HAZARD AND PROTECTION DATA
FLASH POINT 2005?F PMCC
HAZARDOUS CLASSIFICATION: Class 8, PGIII
EXTINGUISHING MEDIA Dry chemical, COZ or foam.
SPECIAL FIRE FIGHTING PROCEDURE Use self-contained breathing apparatus. Remove containers from fire
area if possible. Do not release runoff from fire control methods to sewers or
waterways.
UNUSUAL FIRE/EXPLOSION HAZARD. Toxic fumes may be generated during combustion or high heat exposure.
VII. REACTIVITY DATA
STABILITY Stable at room temperature in closed containers under normal storage and handling
conditions.
INCOMPATIBILITY-MATRLS TO AVOID: Oxidizing acids, Lewis acids, metal-organic compounds.
POLYMERIZATION Hazard polymerization will not occur.
VIII. HEALTH AND HAZARD DATA
EYES Can cause irritation.
SKIN Redness, swelling, sensitization is possible.
INALATION/INGESTION Irritation to respiratory tract, acute or delayed asthmatic symptoms. Shortness of breath,
bronchial irritation.
EXISTING MEDICAL CONDITIONS Existing skin disorders, asthma; prior sensitization of skin
IX. SPECIAL PRECAUTIONS, HANDLING, AND STORAGE DATA
HANDLING PRECAUTIONS Avoid contact with eyes, skin and clothing. Avoid breathing vapor over open container.
STORAGE TEMPERATURE (MIN/MAX). Store in cool, dry place away from excessive heat in original waterproof
container. Containers should
be tightly sealed to avoid contamination with foreign materials.
SHELF LIFE 6 months under manufacturers recommended storage conditions
X. SPILL, LEAK, AND DISPOSAL PROCEDURES
QA-MSDS-07
Revised 5/15/2008
P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
SPILL OR LEAK PROCEDURES. Provide adequate ventilation and wear personal protective equipment. Evacuate
personnel as a precaution Prevent product
spill from entering sewers, streams or drinking water. Collect liquid or soak up with inert
filler or absorbent, such as dry
earth, sand, or oil absorbent sweeping compound. For large spills dike ahead of spill.
WASTE DISPOSAL Dispose in accordance with federal, state, and local regulations for hazardous
materials
XI. SHIPPING INFORMATION
DOT SHIPPING NAME Non-restricted, N.O.I.
TECHNICAL SHIPPING NAME Plastic Material
DOT HAZARD CLASSIFICATION Non-restricted
UN/NA NUMBER None
PACKING GROUP: Non-Restrictive
LABEL: None
XII. U.S. REGULATORY INFORMATION
TSCA Alt components of this product are registered under the regulations of the Toxic Substance
Control Act.
SARA TITLE III, SECTION 313/312 Codes: N/A
SECTION 313 (40 CFR 372.65): N/A
XIII. TOXICOLOGICAL & ECOLOGICAL INFORMATION
Information Unavailable
EMERGENCY NOTICE
Contact CHEMTREC only in event of chemical emergencies of spills, leaks, fires, exposures, or accidents involving
chemicals.
CHEMTREC: 1 (800) 424-9300
QA-MSDS-07
Revised 5/15/2008
P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
Material Safety Data Sheet
MM-100 Part B
EPOXY SURFACE COAT
In Case of Emergency Contact 928-242-1308 or 928-537-8387
Factor II Technology urges each customer or recipient of this MSDS to study it carefully to become aware of and
understand the hazards associated with the product. The reader should consider consulting reference works or individuals
who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to the use and understanding of
the data contained in this MSDS.
To promote safe handling each customer or recipient should: (1) notify and furnish its employees, agents, contractors,
customers, and others whom it knows or believes will use this material of the information regarding hazards or safety, (2)
request its customers to notify their employees, customers and other users of the product of this information.
I. PRODUCT IDENTIFICATION
PRODUCT NAME. ?MM-100 Part B
PRODUCT CLASS. Epoxy Hardener
CHEMICAL TYPE. POLYAMINE
II. HAZARDOUS INGREDIENTS
SUBSTANCE NAME &CAS NUMBER OSHA TWA & STEL ACGIH TWA NIOSH TWA
& STEL NIOSH IDLH
Bisphenol-A 80-05-7 NE 10 ppm NE NE
Polyethylene polyamine Proprietary
III. PHYSICAL/CHEMICAL PROPERTIES
APPEARANCE/ODOR Liquid; slight ammonia-like odor
SPECIFIC GRAVITY (DENSITY) 1.06
BOILING POINT B.P. >385?F (>196篊)
VAPOR PRESSURE <0.3 mm Hg @ 77 篎 (25?C)
% VOLATILE Nil
SOLUBILITY IN WATER Slight
V.O.C ref EPA Meth. 24: N/A
IV. EMERGENCY AND FIRST AID PROCEDURES
IF IN EYE Flush eyes with Luke warm, running water for 15 minutes. Obtain medical attention if irritation
develops.
IF ON SKIN Remove contaminated clothing, wash affected area with mild soap & water twice.
INHALATION Remove to fresh air enviroment. Obtain medical attention if immediate or delayed irritation,
or asthmatic symptoms occur.
QA-MSDS-07
Revised 5/15/2008
P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
INGESTION If swallowed, call physician immediately. Remove stomach contents by gastric
suction or induce vomiting only as directed
by medical personnel. Never give anything by mouth to an unconscious person.
V. OCCUPATIONAL CONTROL RECOMMENDATIONS
EYE PROTECTION Safety glasses or goggles. Plastic face shield should be worn for complete face protection.
SKIN PROTECTION Impermeable gloves. Avoid skin contact during all handling and usage.Wash hands and face
before eating or handling tobacco products.
RESPIRATORY PROTECTION.Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied
respirator (NIOSH certified) may
be necessary for certain applications. Observe OSHA regulations for respirator use.
VENTILATION Local exhaust, or well-ventilated work area must be provided.
ADDITIONAL PROTECTIVE MEASURES: Safety showers and eye wash stations should be
easily accessible to the work area. Training is important. Follow all label precautions.
VI. FIRE HAZARD AND PROTECTION DATA
FLASH POINT 385?F (>196篊) PMCC
HAZARDOUS CLASSIFICATION: Class 8, PGIII
EXTINGUISHING MEDIA Standard for chemical fires; water spray, dry chemical, COZ or foam.
SPECIAL FIRE FIGHTING PROCEDUR. Cool fire exposed containers with water spray. Remove
containers from fire area if possible. Do not release runoff
from fire control methods to sewers or waterways.
UNUSUAL FIRE/EXPLOSION HAZARD. Toxic fumes may be generated during combustion or high heat exposure.
VII. REACTIVITY DATA
STABILITY Stable at room temperature in closed containers under normal storage and handling
conditions.
INCOMPATIBILITY-MATRLS TO AVOID: Acids, chlorinated hydrocarbons. May corrode copper or brass.
POLYMERIZATION Hazard polymerization will not occur.
VIII. HEALTH AND HAZARD DATA
EYES Can cause severe irritation.
SKIN Redness, swelling, sensitization is possible.
INALATION/INGESTION Irritation to respiratory tract, acute or delayed asthmatic symptoms.
EXISTING MEDICAL CONDITIONS Existing skin disorders, asthma; prior sensitization of skin
IX. SPECIAL PRECAUTIONS, HANDLING, AND STORAGE DATA
HANDLING PRECAUTIONS Avoid contact with eyes, skin and clothing. Avoid breathing vapor over open container.
STORAGE TEMPERATURE (MIN/MAX). 65-80篎 (18-27篊) Store in cool, dry place away from excessive heat in original
waterproof container. Containers should
be tightly sealed to avoid contamination with foreign materials.
SHELF LIFE 12 months under manufacturers recommended storage conditions
QA-MSDS-07
Revised 5/15/2008
P.O. Box 1339
Factor II, Lakeside, AZ 85929
Phone:(928) 537-8387
Incorporated Fax: (928) 537-0893
X. SPILL, LEAK, AND DISPOSAL PROCEDURES
SPILL OR LEAK PROCEDURES. Provide adequate ventilation and wear personal protective equipment. Evacuate
personnel as a precaution Prevent product
spill from entering sewers, streams or drinking water. Collect liquid or soak up with inert
filler or absorbent, such as dry
earth, sand, or oil absorbent sweeping compound. For large spills dike ahead of spill.
WASTE DISPOSAL Dispose in accordance with federal, state, and local regulations for hazardous
materials
XI. SHIPPING INFORMATION
DOT SHIPPING NAME Corrosive liquid, n.o.s. Regulated
TECHNICAL SHIPPING NAME Triethylenetetramine solution Class 8, PG III
DOT HAZARD CLASSIFICATION 8
UN/NA NUMBER UN1760
PACKING GROUP: III
LABEL: CORROSIVE
XII. U.S. REGULATORY INFORMATION
TSCA Alt components of this product are registered under the regulations of the Toxic Substance
Control Act.
SARA TITLE III, SECTION 313/312 Codes: N/A
SECTION 313 (40 CFR 372.65): N/A
XIII. TOXICOLOGICAL & ECOLOGICAL INFORMATION
Information Unavailable
EMERGENCY NOTICE
Contact CHEMTREC only in event of chemical emergencies of spills, leaks, fires, exposures, or accidents involving
chemicals.
CHEMTREC: 1 (800) 424-9300
QA-MSDS-07
Revised 5/15/2008
|