Page 1/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
1 Identification of substance
?Product details
?Trade name: BurkEpoxy Pistol Pak EZ - Part A
?Article number: 83-307167A
?Application of the substance / the preparation
?Manufacturer/Supplier:
Edoco
4226 Kansas Avenue Tel.: (888) 287-5387
Kansas City, KS 66106
Emergency Telephone Number: Use only in the event of an emergency involving a spill, leak, fire, exposure, or accident
involving chemicals. Within the U.S., Canada, or the U.S. Virgin Islands, call ChemTrec at (800) 424-9300, 24 hours a day.
Or, outside these areas, call (703) 527-3887. Collect calls are accepted.
?Information department: Environmental, Health, and Safety department.
2 Composition/Data on components
?Chemical characterization
?Description: Mixture of the substances listed below with nonhazardous additions.
?Dangerous components:
471-34-1 calcium carbonate 50-75%
25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight = 700) 10-25%
25085-99-8 Diglycidyl ether of bisphenol A homopolymer 10-25%
10%
2210-79-9 2,3-epoxypropyl o-tolyl ether
5%
84852-15-3 4-nonylphenol, branched
2.5%
546-93-0 Magnesite
?Additional information: For the wording of the listed risk phrases refer to section 16.
3 Hazards identification
?Hazard description: May cause eye and skin irritation. Prolonged contact may cause sensitization.
?Information pertaining to particular dangers for man and environment:
The product has to be labelled due to internationally acknowledged calculation procedures using the latest valid versions.
?Classification system:
The classification was made according to the latest editions of international substances lists, and expanded upon from
company and literature data.
?NFPA ratings (scale 0 - 4)
Health = 1
1 Fire = 1
1 0 Reactivity = 0
?HMIS-ratings (scale 0 - 4)
HEALTH *1 Health = *1
Fire = 1
FIRE 1
Reactivity = 0
PHYSICAL HAZARD 0
USA
(Contd. on page 2)
DR
Page 2/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 1)
4 First aid measures
?After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
?After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
?After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
?After swallowing: Seek medical treatment.
5 Fire fighting measures
?Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
?Protective equipment:
Because fire may produce thermal decomposition products, wear a self-contained breathing apparatus (SCBA) with a full face
piece operated in pressure-demand or positive-pressure mode.
6 Accidental release measures
?Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
?Measures for environmental protection: Inform respective authorities in case of seepage into water course or sewage system.
?Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
7 Handling and storage
?Handling:
?Information for safe handling:
Wear appropriate personal protective clothing to prevent eye and skin contact. Avoid breathing vapors or mists of this
product. Use with adequate ventilation. Do not take internally.
?Information about protection against explosions and fires: No special measures required.
?Storage:
?Requirements to be met by storerooms and receptacles: No special requirements.
?Information about storage in one common storage facility: Not required.
?Further information about storage conditions: Keep receptacle tightly sealed.
8 Exposure controls and personal protection
?Additional information about design of technical systems: No further data; see item 7.
?Components with limit values that require monitoring at the workplace:
471-34-1 calcium carbonate
PEL 15*; 5** mg/m?br>
*Total dust **Respirable fraction
REL 10*; 5** mg/m?br>
*Total dust **Respirable fraction
TLV 10 mg/m?br>
(e)
(Contd. on page 3)
USA
DR
Page 3/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 2)
546-93-0 Magnesite
PEL 15*; 5** mg/m?br>
*Total dust **Respirable fraction
REL 10*; 5** mg/m?br>
*Total dust **Respirable fraction
TLV 10 mg/m?br>
(e)
?Additional information: The lists that were valid during the creation were used as basis.
?Personal protective equipment:
?General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
?Breathing equipment: Not required.
?Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
?Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from
manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can
not be calculated in advance and has therefore to be checked prior to the application.
?Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
?Eye protection: Wear appropriate eye protection to prevent eye contact.
9 Physical and chemical properties
?General Information
Liquid
Form:
According to product specification
Color:
Characteristic
Odor:
?Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: 182癈 (360癋)
94癈 (201癋)
?Flash point:
Product is not selfigniting.
?Auto igniting:
Product does not present an explosion hazard.
?Danger of explosion:
2.029 g/cm?br>
?Density at 20癈 (68癋):
?Solubility in / Miscibility with
Not miscible or difficult to mix.
Water:
?Solvent content:
0.0 %
Organic solvents:
85.2 %
?Solids content:
(Contd. on page 4)
USA
DR
Page 4/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 3)
?Volatile Organic Compounds: Not determined
10 Stability and reactivity
?Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
?Dangerous reactions No dangerous reactions known.
?Dangerous products of decomposition: No dangerous decomposition products known.
11 Toxicological information
?Acute toxicity:
?LD/LC50 values that are relevant for classification:
25085-99-8 Diglycidyl ether of bisphenol A homopolymer
Oral LD50 5000 mg/kg (rat)
Dermal LD50 20000 mg/kg (rabbit)
?Primary irritant effect:
?on the skin: May cause skin irritation.
?on the eye: Irritating effect.
?Sensitization: Sensitization possible through skin contact.
?Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
12 Ecological information
?Ecotoxical effects:
?Remark: Toxic for fish
?General notes:
Water hazard class 3 (Self-assessment): extremely hazardous for water
Do not allow product to reach ground water, water course or sewage system, even in small quantities.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
13 Disposal considerations
?Product:
?Recommendation:
Must not be disposed of as normal garbage. Do not allow product to reach sewage system.
It is the generator's responsibility to determine if the waste meets applicable definitions of hazardous waste. State and local
regulations may differ from federal disposal regulations. Dispose of waste material according to local, state, federal, and
provincial environmental regulations.
?Uncleaned packagings:
?Recommendation: Disposal must be made according to Federal, State, and Local regulations.
14 Transport information
Not Regulated
?DOT regulations:
(Contd. on page 5)
USA
DR
Page 5/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 4)
N/A
?Hazard class:
No Limited Quantity exemption applies for this shipping class.
?Limited Quantity Exemption:
Same as listed for Standard Shipments above.
?U.S. Domestic Ground Shipments:
?U.S. Domestic Ground Non-Bulk (119 gal or less per
Same as listed for Standard Shipments above.
container) Shipments:
Not determine
?Emergency Response Guide (ERG) Number:
Not Regulated
?Land transport ADR/RID (cross-border):
N/A
?ADR/RID class:
Not Regulated
?Maritime transport IMDG:
N/A
?IMDG Class:
No
?Marine pollutant:
Not Regulated
?Air transport ICAO-TI and IATA-DGR:
N/A
?ICAO/IATA Class:
15 Regulations
?Sara
?Section 355 (extremely hazardous substances):
None of the ingredient is listed.
?Section 313 (Specific toxic chemical listings):
This product may contain 1 or more toxic chemicals subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40 CFR part 372. If so, the chemicals are listed below.
None of the ingredients is listed.
?TSCA (Toxic Substances Control Act):
All ingredients are listed.
?Proposition 65
?Chemicals known to the State of California (Prop. 65) to cause cancer:
25068-38-6 reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight = 700)
14808-60-7 Quartz (SiO2)
122-60-1 phenyl glycidyl ether
?Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
?Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
?Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
?Cancerogenity categories
?EPA (Environmental Protection Agency)
None of the ingredients is listed.
?IARC (International Agency for Research on Cancer)
13463-67-7 titanium dioxide 3
14808-60-7 Quartz (SiO2) 1
7631-86-9 silicon dioxide, chemically prepared 3
122-60-1 phenyl glycidyl ether 2B
(Contd. on page 6)
USA
DR
Page 6/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 5)
?NTP (National Toxicology Program)
14808-60-7 Quartz (SiO2) K
?TLV (Threshold Limit Value established by ACGIH)
13463-67-7 titanium dioxide A4
14808-60-7 Quartz (SiO2) A2
122-60-1 phenyl glycidyl ether A3
?MAK (German Maximum Workplace Concentration)
14808-60-7 Quartz (SiO2) 1
122-60-1 phenyl glycidyl ether 2
?NIOSH-Ca (National Institute for Occupational Safety and Health)
13463-67-7 titanium dioxide
14808-60-7 Quartz (SiO2)
122-60-1 phenyl glycidyl ether
?OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
?Product related hazard informations:
The product has been classified and marked in accordance with directives on hazardous materials.
?Hazard symbols:
Xn Harmful
N Dangerous for the environment
?Hazard-determining components of labelling:
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number averagemolecular weight = 700)
2,3-epoxypropyl o-tolyl ether
?Risk phrases:
36/38 Irritating to eyes and skin.
43 May cause sensitisation by skin contact.
51/53 Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
68 Possible risk of irreversible effects.
?Safety phrases:
2 Keep out of the reach of children.
13 Keep away from food, drink and animal feedingstuffs.
24/25 Avoid contact with skin and eyes.
26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
28 After contact with skin, wash immediately with plenty of soap
and water.
29 Do not empty into drains.
36/37/39 Wear suitable protective clothing, gloves and eye/face
protection.
46 If swallowed, seek medical advice immediately and show this
container or label.
57 Use appropriate container to avoid environmental
contamination.
64 If swallowed, rinse mouth with water (only if the person is
conscious).
(Contd. on page 7)
USA
DR
Page 7/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part A
(Contd. of page 6)
?Special labeling of certain preparations:
Contains epoxy constituents. See information supplied by the
manufacturer.
?National regulations:
?Water hazard class: Water hazard class 3 (Self-assessment): extremely hazardous for water.
16 Other information
The provided information is based on our present knowledge. However, this shall not constitute a guarantee for any specific
product features and shall not establish a legally valid contractual relationship.
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product
features and shall not establish a legally valid contractual relationship.
?Department issuing MSDS: Environmental, Health & Safety Department
?Contact: Environmental, Health & Safety Manager
USA
DR
Page 1/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
1 Identification of substance
?Product details
?Trade name: BurkEpoxy Pistol Pak EZ - Part B
?Article number: 83-307167B
?Application of the substance / the preparation
?Manufacturer/Supplier:
Edoco
4226 Kansas Avenue Tel.: (888) 287-5387
Kansas City, KS 66106
Emergency Telephone Number: Use only in the event of an emergency involving a spill, leak, fire, exposure, or accident
involving chemicals. Within the U.S., Canada, or the U.S. Virgin Islands, call ChemTrec at (800) 424-9300, 24 hours a day.
Or, outside these areas, call (703) 527-3887. Collect calls are accepted.
?Information department: Environmental, Health, and Safety department.
2 Composition/Data on components
?Chemical characterization
?Description: Mixture of the substances listed below with nonhazardous additions.
?Dangerous components:
471-34-1 calcium carbonate 50-75%
84852-15-3 4-nonylphenol, branched 10-25%
5%
140-31-8 2-piperazin-1-ylethylamine
2.5%
546-93-0 Magnesite
1%
112-57-2 3,6,9-triazaundecamethylenediamine
?Additional information: For the wording of the listed risk phrases refer to section 16.
3 Hazards identification
?Hazard description: Not applicable.
?Information pertaining to particular dangers for man and environment:
The product has to be labelled due to internationally acknowledged calculation procedures using the latest valid versions.
?Classification system:
The classification was made according to the latest editions of international substances lists, and expanded upon from
company and literature data.
?NFPA ratings (scale 0 - 4)
Health = 3
1 Fire = 1
3 0 Reactivity = 0
?HMIS-ratings (scale 0 - 4)
HEALTH *3 Health = *3
Fire = 1
FIRE 1
Reactivity = 0
PHYSICAL HAZARD 0
4 First aid measures
?General information: Immediately remove any clothing soiled by the product.
(Contd. on page 2)
USA
DR
Page 2/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 1)
?After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
?After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
?After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
?After swallowing:
Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Seek medical treatment.
5 Fire fighting measures
?Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
?Protective equipment:
Because fire may produce thermal decomposition products, wear a self-contained breathing apparatus (SCBA) with a full face
piece operated in pressure-demand or positive-pressure mode.
6 Accidental release measures
?Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
?Measures for environmental protection: Inform respective authorities in case of seepage into water course or sewage system.
?Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7 Handling and storage
?Handling:
?Information for safe handling:
Wear appropriate personal protective clothing to prevent eye and skin contact. Avoid breathing vapors or mists of this
product. Use with adequate ventilation. Do not take internally.
?Information about protection against explosions and fires: No special measures required.
?Storage:
?Requirements to be met by storerooms and receptacles: No special requirements.
?Information about storage in one common storage facility: Not required.
?Further information about storage conditions: Keep receptacle tightly sealed.
8 Exposure controls and personal protection
?Additional information about design of technical systems: No further data; see item 7.
(Contd. on page 3)
USA
DR
Page 3/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 2)
?Components with limit values that require monitoring at the workplace:
471-34-1 calcium carbonate
PEL 15*; 5** mg/m?br>
*Total dust **Respirable fraction
REL 10*; 5** mg/m?br>
*Total dust **Respirable fraction
TLV 10 mg/m?br>
(e)
546-93-0 Magnesite
PEL 15*; 5** mg/m?br>
*Total dust **Respirable fraction
REL 10*; 5** mg/m?br>
*Total dust **Respirable fraction
TLV 10 mg/m?br>
(e)
?Additional information: The lists that were valid during the creation were used as basis.
?Personal protective equipment:
?General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
?Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory
protective device that is independent of circulating air.
?Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
?Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from
manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can
not be calculated in advance and has therefore to be checked prior to the application.
?Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
?Eye protection: Wear appropriate eye protection to prevent eye contact.
9 Physical and chemical properties
?General Information
Liquid
Form:
According to product specification
Color:
Characteristic
Odor:
?Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: > 171癈 (> 340癋)
> 94癈 (> 201癋)
?Flash point:
(Contd. on page 4)
USA
DR
Page 4/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 3)
Product is not selfigniting.
?Auto igniting:
Product does not present an explosion hazard.
?Danger of explosion:
1.600 g/cm?br>
?Density at 20癈 (68癋):
?Solubility in / Miscibility with
Not miscible or difficult to mix.
Water:
?Solvent content:
0.0 %
Organic solvents:
96.5 %
?Solids content:
?Volatile Organic Compounds: Not determined
10 Stability and reactivity
?Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
?Dangerous reactions No dangerous reactions known.
?Dangerous products of decomposition: No dangerous decomposition products known.
11 Toxicological information
?Acute toxicity:
?Primary irritant effect:
?on the skin: Caustic effect on skin and mucous membranes.
?on the eye: Strong caustic effect.
?Sensitization: Sensitization possible through skin contact.
?Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Corrosive
Irritant
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and
stomach.
12 Ecological information
?Ecotoxical effects:
?Remark: Toxic for fish
?General notes:
Water hazard class 3 (Self-assessment): extremely hazardous for water
Do not allow product to reach ground water, water course or sewage system, even in small quantities.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
USA
(Contd. on page 5)
DR
Page 5/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 4)
13 Disposal considerations
?Product:
?Recommendation:
Must not be disposed of as normal garbage. Do not allow product to reach sewage system.
It is the generator's responsibility to determine if the waste meets applicable definitions of hazardous waste. State and local
regulations may differ from federal disposal regulations. Dispose of waste material according to local, state, federal, and
provincial environmental regulations.
?Uncleaned packagings:
?Recommendation: Disposal must be made according to Federal, State, and Local regulations.
14 Transport information
?DOT regulations:
8
?Hazard class:
UN2735
?Identification number:
III
?Packing group:
AMINES, LIQUID, CORROSIVE, N.O.S. (N-
?Proper shipping name (technical name):
AMINOETHYLPIPERAZINE)
8
?Label
Limited Quantity applies for packages 1 gallon or smaller weighing 11
?Limited Quantity Exemption:
pounds or less (per part).
Same as listed for Standard Shipments above.
?U.S. Domestic Ground Shipments:
?U.S. Domestic Ground Non-Bulk (119 gal or less per
Same as listed for Standard Shipments above.
container) Shipments:
Not determine
?Emergency Response Guide (ERG) Number:
?Land transport ADR/RID (cross-border):
8 Corrosive substances
?ADR/RID class:
8
?Danger code (Kemler):
2735
?UN-Number:
III
?Packaging group:
2735 AMINES, LIQUID, CORROSIVE, N.O.S. (N-
?Description of goods:
AMINOETHYLPIPERAZINE)
?Maritime transport IMDG:
8
?IMDG Class:
2735
?UN Number:
8
?Label
III
?Packaging group:
F-A,S-B
?EMS Number:
(Contd. on page 6)
USA
DR
Page 6/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 5)
No
?Marine pollutant:
AMINES, LIQUID, CORROSIVE, N.O.S. (N-
?Propper shipping name:
AMINOETHYLPIPERAZINE)
?Air transport ICAO-TI and IATA-DGR:
8
?ICAO/IATA Class:
2735
?UN/ID Number:
8
?Label
III
?Packaging group:
AMINES, LIQUID, CORROSIVE, N.O.S. (N-
?Propper shipping name:
AMINOETHYLPIPERAZINE)
15 Regulations
?Sara
?Section 355 (extremely hazardous substances):
None of the ingredient is listed.
?Section 313 (Specific toxic chemical listings):
This product may contain 1 or more toxic chemicals subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40 CFR part 372. If so, the chemicals are listed below.
0.01%
7439-92-1 lead
0.01%
7440-43-9 cadmium (non-pyrophoric)
0.01%
7440-38-2 arsenic
0.01%
7440-41-7 beryllium
?TSCA (Toxic Substances Control Act):
All ingredients are listed.
?Proposition 65
?Chemicals known to the State of California (Prop. 65) to cause cancer:
14808-60-7 Quartz (SiO2)
7439-92-1 lead
7440-43-9 cadmium (non-pyrophoric)
7440-41-7 beryllium
?Chemicals known to cause reproductive toxicity for females:
7439-92-1 lead
?Chemicals known to cause reproductive toxicity for males:
7439-92-1 lead
7440-43-9 cadmium (non-pyrophoric)
?Chemicals known to cause developmental toxicity:
7439-92-1 lead
7440-43-9 cadmium (non-pyrophoric)
(Contd. on page 7)
USA
DR
Page 7/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 6)
?Cancerogenity categories
?EPA (Environmental Protection Agency)
7439-92-1 lead B2
7440-43-9 cadmium (non-pyrophoric) B1
7440-38-2 arsenic A
7440-41-7 beryllium B1; L
?IARC (International Agency for Research on Cancer)
14808-60-7 Quartz (SiO2) 1
7439-92-1 lead 2B
7440-43-9 cadmium (non-pyrophoric) 1
7440-38-2 arsenic 1
7440-41-7 beryllium 1
Chromium (VI) compounds, with the exception of barium chromate 1
?NTP (National Toxicology Program)
14808-60-7 Quartz (SiO2) K
7440-43-9 cadmium (non-pyrophoric) K
7440-38-2 arsenic K
7440-41-7 beryllium K
Chromium (VI) compounds, with the exception of barium chromate K
?TLV (Threshold Limit Value established by ACGIH)
14808-60-7 Quartz (SiO2) A2
7439-92-1 lead A3
7440-43-9 cadmium (non-pyrophoric) A2
7440-38-2 arsenic A1
7440-41-7 beryllium A1
?MAK (German Maximum Workplace Concentration)
14808-60-7 Quartz (SiO2) 1
7440-43-9 cadmium (non-pyrophoric) 2
7440-38-2 arsenic 1
7440-41-7 beryllium 2
?NIOSH-Ca (National Institute for Occupational Safety and Health)
14808-60-7 Quartz (SiO2)
7440-43-9 cadmium (non-pyrophoric)
7440-38-2 arsenic
7440-41-7 beryllium
?OSHA-Ca (Occupational Safety & Health Administration)
7440-43-9 cadmium (non-pyrophoric)
7440-38-2 arsenic
?Product related hazard informations:
The product has been classified and marked in accordance with directives on hazardous materials.
?Hazard symbols:
C Corrosive
N Dangerous for the environment
(Contd. on page 8)
USA
DR
Page 8/8
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 04/07/2008 Reviewed on 04/07/2008
Trade name: BurkEpoxy Pistol Pak EZ - Part B
(Contd. of page 7)
?Hazard-determining components of labelling:
2-piperazin-1-ylethylamine
4-nonylphenol, branched
?Risk phrases:
34 Causes burns.
43 May cause sensitisation by skin contact.
62 Possible risk of impaired fertility.
51/53 Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
63 Possible risk of harm to the unborn child.
?Safety phrases:
1/2 Keep locked up and out of the reach of children.
13 Keep away from food, drink and animal feedingstuffs.
20 When using do not eat or drink.
23 Do not breathe gas/fumes/vapour/spray (appropriate wording to
be specified by the manufacturer).
25 Avoid contact with eyes.
26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
27/28 After contact with skin, take off immediately all contaminated
clothing, and wash immediately with plenty of water.
29/56 Do not empty into drains, dispose of this material and its
container at hazardous or special waste collection point.
36/37/39 Wear suitable protective clothing, gloves and eye/face
protection.
45 In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
52 Not recommended for interior use on large surface areas.
57 Use appropriate container to avoid environmental
contamination.
60 This material and its container must be disposed of as
hazardous waste.
64 If swallowed, rinse mouth with water (only if the person is
conscious).
?National regulations:
?Water hazard class: Water hazard class 3 (Self-assessment): extremely hazardous for water.
16 Other information
The provided information is based on our present knowledge. However, this shall not constitute a guarantee for any specific
product features and shall not establish a legally valid contractual relationship.
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product
features and shall not establish a legally valid contractual relationship.
?Department issuing MSDS: Environmental, Health & Safety Department
?Contact: Environmental, Health & Safety Manager
USA
DR
|