MATERIAL SAFETY DATA SHEET
EPOXYPATCH (PART-A)
SECTION 1: PRODUCT IDENTIFICATION AND USE
PRODUCT NAME: st
Epoxypatch - Two Component 100% Solids Epoxy Coatings (PART-A) Date Prepared: January 1 , 2009
PRODUCT USE: High gloss commercial and industrial floor coatings
MANUFACTURER: Brodi Specialty Products Ltd.
250 Cochrane Drive, Unit 9, Markham, ON, L3R 8E5
INFORMATION PHONE: 1-(877) 744-0751
EMERGENCY PHONE: (905) 305-8551
PREPARED BY: MSDS Co-ordinator, (877) 744-0751 ext 205, Brodi Specialty Products Ltd
SECTION 2: HAZARDOUS INGREDIENTS
HARDOUS INGREDIENTS CAS # LD 50 (species & route) Weight/Weight %
Bisphenola-A 25068-38-6 Not available 60-100
O-Cresol Glycidylether 2210-79-9 Approx 2.50g/kg (rat, oral) 15-40
2-Ethylhexyl acrylate 26376-86-3 Not available 0.1-1.0
Acrylate copolymer 1-5
Nepheline syenite 37244-96-5 Not available 5-10
Magnesium Aluminum silicate 8031-18-3 Not available 1-5
SECTION 3: PHYSICAL DATA
PHYSICAL STATE: Thick liquid ORDOR & APPEARANCE: Mild epoxy, opaque
ODOR THRESHOLD: Not established SPECIFIC GRAVITY: 1.46
VAPOR PRESSURE: EVAPORATION <0.13 KPa at 20癈(68癋) VAPOR DENSITY: Not established
RATE: Not established BOILING POINT: Not established
FREEZING POINT: Not established PH: Not established
DENSITY: 1.46 kg/litter COEFFICIENT OF H2O/OIL: Not applicable
SECTION 4: FIRE AND EXPLOSION HAZARD
FLAMMABILITY: Non flammable
FLASH POINT: > 200癋
MEANS OF EXTINCTION: Foam, CO2, dry chemical
UPPER EXPLOSION LIMIT: Not available
LOWER EXPLOSION LIMIT: Not available
AUTO-IGNITION TEMPERATURE: Not available
TDG CLASSIFICATION: Not regulated
HAZARDOUS COMB. PRODUCTS: CO, CO2
EXPLOSION DATA:
Sensitivity to Mechanical Impact: Not sensitive
Sensitivity to Static Discharge: Not sensitive
SECTION 5: REACTIVITY DATA
CHEMICAL STABILITY: Stable
IMCOMPATIBILITY TO OTHER SUBSTANCES: Base materials
CONDITIONS OF REACTIVITY: Excessive heat, contamination with strong acids, bases, amines
Mercaptans can cause polymerization
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2
SECATION 6: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY: Skin contact, eye contact, inhalation, ingestion
EFFECTS OF ACUTE EXPOSURE:
Skin: May cause reddening and swelling and/or sensitization. May cause allergic skin reaction in certain
individuals
Eyes: May cause eye injury which may persist for several days
Inhalation: No specific information available
Ingestion: Slightly toxic, SEE LD50
EFFECTS OF CHRONIC EXPROSURE: Recent 2 years bioassays in rats and mice exposed by the dermal route to the diglycidyl ether of
bisphenol A yielded no evidence of carcinogenicity to the skin or any other organs
Not established
EXPOSURE LIMIT(S): See above
IRRITANCY OF PRODUCT: May cause skin sensitization
SENSITIZATION:
CARCINOGENICITY, REPRODUCTIVE, Specific information is not available, but may be mutagenic, carcinogenic
TERATOGENICITY, MUTAGENICITY: None known
SYNERGISTIC PRODUCTS:
EPOXYPATCH (PART-A)
SECTION 7: PREVENTATIVE MEASURES
GLOVES: Impervious (neoprene)
RESPIRATORY: General dilution ventilation
EYES: Chemical splash goggles
OTHER: Impervious body covering
ENGINEERING CONTROLS: General dilution ventilation
LEAK / SPILL: Scrape up and containerize, clean residue with warm, soapy water
WASTE DISPOSAL: In accordance with all regulations
HANDLING: Avoid contact with eyes, skin, clothing and avoid prolonged breathing of vapors
STORAGE: Keep lid closed, store at 50 - 80癋
SPECIAL SHIPPING INSTR.: None required
SECTION 8: FIRST AID MEASURES
EYES: Flush with water for 15 minutes, consult a physician
SKIN: Wash with soap and warm water. If irritation occurs, consult a physician
INHALATION: If affected, remove to fresh air and consult a physician
INGESTION: Consult a physician
SECTION 9: WHMIS INFORMATION Health-2 Flammability-1 Reactivity-0
|