HT 180 ADHESIVE MATERIAL SAFETY DATA SHEET
PART NO: CS-650 Page 1 of 5
CS-652A, CS-652B, CS-652C, CS-652D, CS-652E, CS-652F, CS-652G, CS-652H
CS-655A, CS-655B, CS-655C, CS-655D, CS-655E, CS-655F, CS-655G, CS-655H
Effective Date: 03/18/2008
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
HMIS RATING
Tradename: TDR 1100-11 RESIN 1 HEALTH 2
2 0 FLAMMABILITY 1
Chemical family: Epoxy REACTIVITY 0
NFPA RATING PROTECTIVE
Intended Use or Product Type: Epoxy adhesive resin. EQUIPMENT
SHIPPER EMERGENCY INFORMATION
Clock Spring Company, L.P. Emergency telephone number
14107 Interdrive West (CHEMTREC): (800) 424-9300
Houston, TX 77032 Other Calls: (800) 471-0060
2. COMPOSITION / INFORMATION ON INGREDIENTS
EXPOSURE LIMITS CARCINOGEN
STATUS
OSHA CAS# CHEMICAL IDENTITY AGGIH OSHA MFR IARC NTP OSHA
TWA STEL PEL STEL
25068-38-6 Phenol, 4, 4'(1- NE NE NE NE NE NR NR NR
methylethylidene)bis-, polymer
with (chloromethyl) oxirane
Common Name: Bisphenol A Diglycidyl Ether
Polymer
NE - Not Established NR - Not Reviewed
MSDS NO: 6174
HT 180 ADHESIVE MATERIAL SAFETY DATA SHEET
PART NO: CS-650 Page 2 of 5
CS-652A, CS-652B, CS-652C, CS-652D, CS-652E, CS-652F, CS-652G, CS-652H
CS-655A, CS-655B, CS-655C, CS-655D, CS-655E, CS-655F, CS-655G, CS-655H
3. HAZARDS IDENTIFICATION
Emergency Overview: Warning! Causes skin and eye irritation. May cause allergic skin reaction.
Primary Route(s) of Entry: Dermal; heated product may produce inhalable vapors.
4. FIRST AID MEASURES
First aid for ingestion:
If conscious, give plenty of water to drink. Do NOT induce vomiting. Call a physician.
First aid for skin:
Wash with soap and water. Remove contaminated clothing and launder before re-use.
First aid for inhalation:
Remove to fresh air. Give oxygen and/or artificial respiration, if needed. Call a physician.
First aid for eyes:
Immediately flush eyes with water for 15 minutes. Call a physician.
Overexposure Effects:
Skin and eye irritation and allergic skin reactions.
Medical Conditions Aggravated by Exposure:
Skin and eye conditions.
Additional Information:
Referral to a physician is recommended if there is any question about the serious of any injury.
5. FIRE FIGHTING MEASURES
o o
Flash Point: >350 F (>177 C)
Flash Point Method Used: Estimated
Flammable Limits in Air (lower - % by volume): Not established
Flammable Limits in Air (upper - % by volume): Not established
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, foam.
Fire Fighting Equipment: Use self-contained breathing apparatus.
Fire and Explosion Hazards: Decomposition and combustion products may be toxic.
6. ACCIDENTAL RELEASE MEASURES
Spill control:
Remove spillage by absorbing in absorbent material.
MSDS NO: 6174
HT 180 ADHESIVE MATERIAL SAFETY DATA SHEET
PART NO: CS-650 Page 3 of 5
CS-652A, CS-652B, CS-652C, CS-652D, CS-652E, CS-652F, CS-652G, CS-652H
CS-655A, CS-655B, CS-655C, CS-655D, CS-655E, CS-655F, CS-655G, CS-655H
7. HANDLING AND STORAGE
Handling precautions:
Warning! Causes skin and eye irritation. May cause allergic skin reaction. Avoid contact with eyes, skin, and clothing.
Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.
Other handling information:
Nuisance dust may be generated when sanding or sawing cured material.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Skin protection:
Wear impermeable gloves.
Respiratory Protection:
Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely.
Eye protection:
Wear splash-proof chemical goggles.
Engineering controls:
General mechanical and local exhaust in accordance with ACGIH recommendations.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Creamy
Odor: Mild
Physical State: Liquid
Solubility in Water: Negligible
Specific Gravity: 1.16 (water = 1)
Boiling Point: Not determined
Evaporation Rate: Not determined
Vapor Density: Not determined
pH: Not determined
Percent Volatile: Negligible.
10. STABILITY AND REACTIVITY
Conditions to avoid:
Excessive heat for prolonged periods of time.
Stability:
Stable.
Incompatibility:
Strong oxidizing agents, acids, bases.
Hazardous Decomposition Products:
Combustion may form toxic materials, such as carbon dioxide, carbon monoxide.
Hazardous Polymerization:
Will not occur. MSDS NO: 6174
HT 180 ADHESIVE MATERIAL SAFETY DATA SHEET
PART NO: CS-650 Page 4 of 5
CS-652A, CS-652B, CS-652C, CS-652D, CS-652E, CS-652F, CS-652G, CS-652H
CS-655A, CS-655B, CS-655C, CS-655D, CS-655E, CS-655F, CS-655G, CS-655H
11. TOXICOLOGICAL INFORMATION
Sensitization:
Possible in susceptible individuals.
Skin Irritation:
Irritant.
Eye Irritation:
Irritant.
12. ECOLOGICAL INFORMATION
13. DISPOSAL CONSIDERATIONS
Waste disposal method:
Consult qualified local or corporate personnel for method that will comply with local, state and federal health and
environmental regulations.
14. TRANSPORT INFORMATION:
DOT: Non-Bulk
Proper shipping name: Resin compounds, N.O.I.
Department of Transportation: Not regulated as a hazardous material by the U.S. Department of Transportation
(DOT) 49 CFR 172.101 hazardous materials table.
15. REGULATORY INFORMATION
OSHA Status: This Material Safety Data Sheet (MSDS) has been prepared in compliance with the federal OSHA Hazard
Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemical under that
standard.
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261).
SARA Title III: Section 313 - Toxic Chemical(s): This product does not contain a toxic chemical for routine annual Toxic
Chemical Release Reporting' under Sec. 313 (40 CFR 372).
TSCA Section 8(b) - Inventory Status: Chemical components listed on TSCA Inventory.
TSCA Section 12(b) - Export Notification: This product contains the following chemicals that are subject to Section
12(b) export notification:
MSDS NO: 6174
HT 180 ADHESIVE MATERIAL SAFETY DATA SHEET
PART NO: CS-650 Page 5 of 5
CS-652A, CS-652B, CS-652C, CS-652D, CS-652E, CS-652F, CS-652G, CS-652H
CS-655A, CS-655B, CS-655C, CS-655D, CS-655E, CS-655F, CS-655G, CS-655H
Chemical Name: CYCLOTETRASILOXANE, OCTAMETHYL-
CASRN: 556-67-2
Pennsylvania Right to Know: The following is required composition information:
Chemical Name: Phenol, 4,4'-(1-methylethylidene)bis-, polymer with (chloremethyl)oxirane
CASRN: 25068-38-6
Common Name: Bisphenol A Diglycidyl Ether Polymer
Comment: Not on Pennsylvania Hazardous Substance List.
16. OTHER INFORMATION:
MSDS No. 6174
Approved by: Jim Souza
Title: SH&E Manager
Disclaimer: The following supercedes Buyer's documents. SELLER MAKES NO REPRESENTATION OR WARRANTY,
EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No
statements herein are to be construed as inducements to infringe any relevant patent. Under no circumstances shall
Seller be liable for incidental, consequential or indirect damages for alleged negligence, breach of warranty, strict liability,
tort or contract arising in connection with the product(s). Buyer's sole remedy and Seller's sole liability for any claims shall
be Buyer's purchase price. Data and results are based on controlled or lab work and must be confirmed by Buyer by
testing for its intended conditions of use. The product(s) has not been tested for, and is therefore not recommended for,
uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses for which
implantation within the human body is intended.
MSDS NO: 6174
|