SAFETY DATA SHEET
Sikadur 31-CF Normal/ Rapid/ Slow Part A
Date of issue - 31/03/2006. SKD31CFA
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code SKD31CFA
Product Name Sikadur 31-CF Normal/ Rapid/ Slow Part A
Product Description 2-Component epoxy resin based patching and repair mortar.
Manufacturer/Supplier Sika Limited
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Reaction product: bisphenol-A ( epichlorohydrin), 25085-99-8 10.00% - 25.00% Xi, N R36/38, R43, R51/53
epoxy resin( No Av. Mol.wt <= 700)
Aliphatic glycidyl ether 68609-97-2 1.00% - 2.50% Xi, N R36/38, R43, R51/53
Solvent Naptha (petroleum) heavy aromatic. 64742-94-5 1.00% - 2.50% Xn, N R51/53, R65, R66
R67
3. HAZARD IDENTIFICATION
Main Hazards Irritating to eyes and skin.
May cause sensitisation by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
4. FIRST AID MEASURES
Eye Contact Immediately flood the eye with plenty of water for at least 15
minutes, holding the eye open. Obtain medical attention urgently.
Skin Contact Wipe off as much as possible with a clean dry cloth.
Wash skin thoroughly with soap and water.
If material proves difficult to remove, use suitable skin cleanser
(not solvent).
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Ingestion Wash out mouth with water. Obtain medical attention.
Inhalation Remove from exposure. In cases of possible respiratory irritation
or if feeling unwell in cases of prolonged exposure,obtain medical
attention.
5. FIRE FIGHTING MEASURES
Extinguishing Media Not readily combustible. Use foam, dry chemical or carbon dioxide.
Extinguishing Media - Not suitable Do not use water jet.
Special Hazards of Product Combustion will produce smoke,carbon dioxide and carbon
monoxide.
Protective Equipment for Fire-Fighting Wear full protective clothing and self-contained breathing
apparatus.
CM Version - 1 Page: 1/4
SAFETY DATA SHEET
Sikadur 31-CF Normal/ Rapid/ Slow Part A
Date of issue - 31/03/2006. SKD31CFA
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Wear appropriate protective clothing.
Environmental Precautions and Clean-up Prevent the material from entering drains or water courses.
Methods
Spillages Contain and absorb using earth, sand or other inert material.
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Handling Use in well ventilated area.
Storage Storage area should be: cool. dry.
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed .
Keep away from foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Control Measures Use of the basic principles of Industrial Hygiene will enable this
material to be used safely.
Respiratory Protection Respiratory protection not normally required.
Hand Protection Wear suitable impervious gloves. (butyl / nitrile type)
The insides of gloves must be kept scrupulously clean.
Eye Protection Chemical goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Paste.
Color Light grey.
Odor Characteristic.
Flash Point 癈 Approx. 166
Solubility - Water Insoluble.
Density (kg/m3) Approx. 1940 at 20 癈.
Viscosity (at 20癈) Thixotropic paste
10. STABILITY AND REACTIVITY
Stability Stable under normal conditions.
Hazardous Decomposition Products Heating may produce: oxides of carbon. acrid smoke and irritating
fumes.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Low order of acute toxicity.
Eye irritation Irritating to the eyes.
Skin irritation Frequent or prolonged skin contact may cause some local short
term skin irritation.
Sensitization - Skin The low molecular weight epoxy resin is a potential skin sensitiser.
The possibility of allergic sensitisation should be considered
CM Version - 1 Page: 2/4
SAFETY DATA SHEET
Sikadur 31-CF Normal/ Rapid/ Slow Part A
Date of issue - 31/03/2006. SKD31CFA
12. ECOLOGICAL INFORMATION
Mobility The product is insoluble in water.
Persistence/degradability The product is expected to be not readily biodegradable.
Ecotoxicity This material is harmful to aquatic organisms.
13. DISPOSAL
Product Disposal Hazardous waste.
Arrange for disposal via a licensed waste contractor.
Container Disposal Dispose of containers with care.
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
ADR/RID : Proper shipping name Not Regulated under ADR/RID
IMDG : Proper shipping name Not Regulated under IMDG
IATA : Proper shipping name Not Regulated under ICAO
15. REGULATORY INFORMATION
Irritant
Label Requirements
Risk Phrases Irritating to eyes and skin.
May cause sensitisation by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Safety Phrases Avoid contact with skin.
Wear suitable gloves.
Contains epoxy constituents. See information supplied by the
manufacturer.
Contains reaction product: bisphenol A-(epichlorhydrin)
epoxy resin (number average molecular weight <= 700)
oxirane, mono[(C12-14-alkyloxy)methyl]derivs.
16. OTHER INFORMATION
First Issue Date 31.3.2006
Revisions Highlighted Future revisions will incorporate such information as is required but
which is not available at this time.
Uses and Restrictions Customers are urged to ensure that the product is entirely suitable
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
CM Version - 1 Page: 3/4
SAFETY DATA SHEET
Sikadur 31-CF Normal/ Rapid/ Slow Part A
Date of issue - 31/03/2006. SKD31CFA
UK Legislation Health and Safety at Work etc Act, 1974, and relevant Statutory
Provisions.
SI 20021689 Chemicals (Hazard Information and Packaging)
Regulations
SI 2002/2677: The Control of Substances Hazardous to Health
Regulations
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
SI 2005/ 894 Hazardous waste regulations 2005
UK Guidance Publications General Approved Code of Practice to COSHH Regulations, HSE.
Footnote The information contained in this SDS corresponds to our level of
knowledge at the time of publication.All warranties are
excluded.Our most current General Sales Conditions shall apply.
Please consult the Technical Data Sheet prior to use.
SAFETY DATA SHEET
Sikadur 31/41 CF Normal Part B
Date of issue - 31/03/2006. SKDCFNB
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code SKDCFNB
Product Name Sikadur 31/41 CF Normal Part B
Product Description Epoxy resin hardener component
Manufacturer/Supplier Sika Limited
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Benzyl Alcohol 100-51-6 2.50% - 10.00% Xn R20/22
Triethylenetetramine 112-24-3 2.50% - 10.00% C R21, R34, R43,
R52/53
Solvent Naptha (petroleum) heavy aromatic. 64742-94-5 2.50% - 10.00% Xn, N R51/53, R65, R66
R67
2,4,6-Tri(dimethylaminomethyl) phenol 90-72-2 1.00% - 2.50% Xn R22, R36/38
Naphthalene, pure 91-20-3 0.10% - 1.00% Xn, N R22, R50/53, R40
3. HAZARD IDENTIFICATION
Main Hazards Irritating to eyes and skin.
May cause sensitization by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
4. FIRST AID MEASURES
Eye Contact Immediately flood the eye with plenty of water for at least 15
minutes, holding the eye open. Eyelids should be held away from
the eyeball to ensure thorough rinsing.
Obtain medical attention urgently.
Skin Contact Wipe off as much as possible with a clean dry cloth. Wash skin
thoroughly with soap and water.
If material proves difficult to remove, use suitable skin cleanser
(not solvent).
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before
re-use.
Ingestion Do not induce vomiting.
Obtain medical attention.
Inhalation Remove from exposure. In cases of possible respiratory irritation
or if feeling unwell in cases of prolonged exposure,obtain medical
attention.
CM Version - 1.01 Page: 1/4
SAFETY DATA SHEET
Sikadur 31/41 CF Normal Part B
Date of issue - 31/03/2006. SKDCFNB
5. FIRE FIGHTING MEASURES
Extinguishing Media Not readily combustible. Use foam, dry chemical or carbon dioxide.
Extinguishing Media - Not suitable Do not use water jet.
Special Hazards of Product Combustion will generate oxides of carbon and nitrogen
Protective Equipment for Fire-Fighting Wear full protective clothing and self-contained breathing
apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Wear appropriate protective clothing.
Environmental Precautions and Clean-up Prevent the material from entering drains or water courses.
Methods
Spillages Contain and absorb using earth, sand or other inert material.
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Handling Exposure by inhalation or skin contact should be minimised by
good Industrial Hygenie practices.
Avoid contact with eyes, skin and clothing.
Mix in a well ventilated area.
Storage Storage area should be: cool. dry.
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed .
Keep away from foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Control Measures Use of the basic principles of Industrial Hygiene will enable this
material to be used safely.
Respiratory Protection Respiratory protection not normally required.
Hand Protection Wear suitable impervious gloves. (butyl / nitrile type)
The insides of gloves must be kept scrupulously clean.
Eye Protection Chemical goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Paste.
Color Dark Grey.
Odor Amine like.
pH Approx. 11 at 10% w/w in water.
Flash Point 癈 Exceeds 100.
Solubility - Water Partially soluble.
Density (kg/m3) Approx. 1940 at 20 癈.
Viscosity (at 20癈) Thixotropic paste
CM Version - 1.01 Page: 2/4
SAFETY DATA SHEET
Sikadur 31/41 CF Normal Part B
Date of issue - 31/03/2006. SKDCFNB
10. STABILITY AND REACTIVITY
Stability Stable under normal conditions.
Hazardous Decomposition Products Heating may produce: ammonia. oxides of carbon. oxides of
nitrogen. acrid smoke and irritating fumes.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Low order of acute toxicity.
Eye irritation Irritating to the eyes.
Skin irritation Frequent or prolonged skin contact may cause some local short
term skin irritation.
Sensitization - Skin May cause sensitisation. May cause allergic reactions to certain
individuals.
12. ECOLOGICAL INFORMATION
Mobility The product is sparingly soluble in water.
Persistence/degradability The product is expected to be not readily biodegradable.
Ecotoxicity This material is harmful to aquatic organisms.
13. DISPOSAL
Product Disposal Hazardous waste.
Arrange for disposal via a licensed waste contractor.
Container Disposal Dispose of containers with care.
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
ADR/RID : Proper shipping name Not Regulated under ADR/RID
IMDG : Proper shipping name Not Regulated under IMDG
IATA : Proper shipping name Not Regulated under ICAO
15. REGULATORY INFORMATION
Irritant
Label Requirements
Risk Phrases Irritating to eyes and skin.
May cause sensitization by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Safety Phrases Avoid contact with skin.
Wear suitable gloves.
Contains 3-aminomethyl-3,5,5-trimethylcyclohexylamine
3,6-diazaoctanethylenediamine
CM Version - 1.01 Page: 3/4
SAFETY DATA SHEET
Sikadur 31/41 CF Normal Part B
Date of issue - 31/03/2006. SKDCFNB
16. OTHER INFORMATION
First Issue Date 31.3.2006
Revisions Highlighted Future revisions will incorporate such information as is required but
which is not available at this time.
Uses and Restrictions Customers are urged to ensure that the product is entirely suitable
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
UK Legislation Health and Safety at Work etc Act, 1974, and relevant Statutory
Provisions.
SI 2002/1689 Chemicals (Hazard Information and Packaging)
Regulations
SI 2002/2677: The Control of Substances Hazardous to Health
Regulations
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
SI 2005/ 894 Hazardous waste regulations 2005
UK Guidance Publications Approved Code of Practice - Management of Health and Safety at
Work, HSE.
General Approved Code of Practice to COSHH Regulations, HSE.
Footnote The information contained in this SDS corresponds to our level of
knowledge at the time of publication.All warranties are
excluded.Our most current General Sales Conditions shall apply.
Please consult the Technical Data Sheet prior to use.
|