MATERIAL SAFETY DATA SHEET
Date Prepared: February 1, 2008
1. PRODUCT/COMPANY IDENTIFICATION
Product Name: Product No:
? 201181 & 201180
BONSAL B-7000 Epoxy Mortar & Grout (Part A)
ProSpec?B-7000 Epoxy Mortar & Grout (Part A) 201181 & 201180
Emergency Telephone: Manufacturer's Name & Address:
800-424-9300 (Chemtrec) or Bonsal American Inc./an Oldcastle company
703-527-3887 (Outside USA) 8201 Arrowridge Blvd
Charlotte, NC 28273
Telephone Number for Information:
704-525-1621
2. EMERGENCY AND FIRST AID
Product is a liquid resin. B-7000 (Part A) is mixed with B-7000
EMERGENCY INFORMATION:
(Part B). Inhalation may cause irritation to the moist mucous
membranes of the nose, throat and upper respiratory system or
may cause or may aggravate certain lung diseases or conditions.
Immediately flush eye thoroughly with water. Continue flushing
EYES:
eye for at least 15 minutes, including under lids, to remove all
particles. Get medical attention if irritation occurs.
Wash skin with water and soap or an approved cream. Seek
SKIN:
medical treatment if irritation or inflammation develops.
Remove person to fresh air. If breathing is difficult, administer
INHALATION:
oxygen. If not breathing, give artificial respiration. Seek medical
help if coughing and other symptoms do not subside. Inhalation
of large amounts of product requires immediate medical
attention.
Induce vomiting. Call a physician immediately.
INGESTION:
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 1 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
3. COMPOSITION INFORMATION
This product is a heavy body liquid. Its major components are:
DESCRIPTION:
100% Proprietary
Epoxy Resin
4. HAZARDOUS INGREDIENTS
COMPONENT OSHA PEL ACGIH TLV-TWA NIOSH REL
(8-Hour TWA) (1995-1996) (8-Hour TWA)
-------------------- ------------------------- ------------------------ ------------------------
5. HAZARD IDENTIFICATION
NOTE: Potential health effects may vary depending upon the
POTENTIAL HEALTH EFFECTS:
duration and degree of exposure. To reduce or eliminate health
hazards associated with this product, use exposure controls or
personal protection methods as described in Section 10.
(Acute/Chronic) Exposure may cause immediate or delayed
EYE CONTACT:
irritation or inflammation of the cornea. Eye contact by splashes
of wet product may cause effects ranging from slight to moderate
eye damage. Eye damage may be irreversible.
(Acute) Exposure to liquid product may cause drying of the skin
SKIN CONTACT:
with consequent mild irritation or more significant effects
attributable to aggravation of other conditions. Discomfort or pain
cannot be relied upon to alert a person to a hazardous skin
exposure.
(Chronic) Product coming in contact with wet skin or exposure to
wet product may cause skin irritation. Prolonged exposure may
cause skin damage.
(Acute/Chronic) Some individuals may exhibit an allergic
response upon exposure to product. The response may appear in a
variety of forms ranging from a mild rash to severe irritation.
(Acute) Exposure to product may cause irritation to the moist
INHALATION:
mucous membranes of the nose, throat and upper respiratory
system. Pre-existing upper respiratory and lung diseases may be
aggravated by inhalation of product.
(Chronic) Inhalation exposure to product may cause delayed lung
injury including and aggravate other lung diseases or conditions.
(Acute/Chronic) Internal discomfort or ill effects are possible if
INGESTION:
swallowed.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 2 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
Product is not recognized as a carcinogen by NTP, OSHA, or
CARCINOGENIC POTENTIAL:
IARC.
6. ACCIDENTAL RELEASE MEASURES
Contain material to prevent contamination of soil, surface water or ground water. Use dry clean-up methods that do
not disperse dust into the air or entry into surface water. Material can be used if not contaminated. Place in an
appropriate labeled container for disposal or use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in Section 12.
7. PHYSICAL/CHEMICAL DATA
Viscous liquid
APPEARANCE/ODOR: PHYSICAL STATE:
Odor:
Appearance: clear
Not applicable
BOILING POINT: MELTING POINT:
>200?F (94?C)
Nonvolatile
VAPOR DENSITY:
Nil
SOLUBILITY IN WATER:
1.0 ?1.3 Nonvolatile
SPECIFIC GRAVITY EVAPORATION RATE:
(H2O = 1.0):
8. FIRE AND EXPLOSION
>200?F (94?C) Not available
FLASH POINT: LOWER EXPLOSIVE LIMIT:
Not combustible Not available
AUTO IGNITION UPPER EXPLOSIVE LIMIT:
TEMPERATURE:
Not applicable Water spray may be ineffective.
FLAMMABLE LIMITS SPECIAL FIRE FIGHTING
Water spray may be used to cool
PROCEDURES:
closed containers to prevent
pressure build-up and possible
autoignition or explosion when
exposed to extreme heat. If water
is used, fog apparatus and full
protective clothing. Requires
self-contained breathing
apparatus.
Use extinguishers Keep this product away from
UNUSUAL FIRE AND
appropriate for heat, sparks, flame, and other
EXTINGUISHING EXPLOSION HAZARDS:
surrounding fire. sources of ignition (i.e., pilot
MEDIA:
lights, electric motors, static
electricity). Invisible vapors can
travel to a source of ignition and
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 3 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
flash back. Do not smoke while
using this product. Keep
containers tightly closed when not
in use. Closed containers may
explode when overheated. Do not
apply to hot surfaces. Toxic
gases may form when this
product comes in contact with
extreme heat.
Carbon dioxide
HAZARDOUS
Carbon monoxide
COMBUSTION
Others unknown
PRODUCTS:
9. STABILITY AND REACTIVITY DATA
Product is normally stable at ambient temperatures and
STABILITY:
pressures.
Avoid contact with strong oxidizing agents, bases and strong
INCOMPATIBILITY (MATERIALS AND
acids and epoxy hardeners under uncontrolled conditions.
CONDITIONS TO AVOID):
May produce hazardous decomposition products such as carbon
HAZARDOUS DECOMPOSITION:
dioxide and monoxide when exposed to extreme heat. Extreme
heat includes, but is not limited to, flame cutting, brazing, and
welding.
May not occur.
HAZARDOUS POLYMERIZATION:
10. PRECAUTIONS FOR HANDLING AND STORAGE
Keep dry until used. Handle and store in a manner so that
HANDLING AND STORAGE
airborne dust does not exceed applicable exposure limits. Use
adequate ventilation and dust collection. Use exposure control
and personal protection methods as described in Section 10.
Use dry clean-up methods that do not disperse dust into the air or
SPILLS:
entry into surface water. Material can be used if not
contaminated. Place in an appropriate container for disposal or
use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in
Section 10.
11. TOXICOLOGICAL INFORMATION
See Section 5 for Hazard Identification. No recognized unusual toxicity to plants and animals.
Conditions aggravated by exposure: Eye disease, Skin disorders and Chronic Respiratory conditions.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 4 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
12. EXPOSURE CONTROLS/PERSONAL PROTECTION
Use local exhaust or general dilution ventilation to control fumes
RESPIRATORY PROTECTION:
to levels below applicable exposure limits. Minimize dispersal
into the air. Avoid breathing vapors.
If local or general ventilation is not adequate to control levels
below applicable exposure limits or when irritation or discomfort
occurs, use MSHA/NIOSH approved respirators.
Wear safety glasses with side shields or goggles to avoid contact
EYE PROTECTION:
with the eyes. In due to unpredictable environments, wear tight-
fitting unvented or indirectly vented goggles to avoid eye
irritation or injury. Contact lenses should not be worn when
handling this product.
Wear impervious abrasion- and chemical-resistant gloves, boots,
SKIN PROTECTION:
long-sleeved shirt, long pants or other protective clothing to
prevent skin contact. Promptly remove clothing with product or
clothing dampened with moisture mixed with product, and
launder before re-use. If contact occurs, wash areas contacted by
material with soap and water.
13. DISPOSAL CONSIDERATIONS
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND
DISPOSAL:
OR INTO ANY BODY OF WATER. All disposal methods must
be in compliance with all Federal, State/ Provincial and local
laws and regulations of unusable or contaminated materials.
Regulations may vary in different locations. Waste
characterizations and compliance with applicable laws are the
responsibility solely of the waste generator. Dispose of
packaging/containers according to local, state and federal
regulations.
IF THIS MATERIAL AS PACKAGED, BECOMES A WASTE, IT DOES NOT MEET THE CRITERIA FOR A HAZARDOUS
WASTE AS DEFINED BY THE ENVIRONMENTAL PROTECTION AGENCY UNDER THE AUTHORITY OF THE RESOURCE
CONSERVATION AND RECOVER ACT (40CFR 261), DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
14. TRANSPORTATION DATA
DOT Proper Shipping Name: Not Regulated by DOT-HMR
15. OTHER REGULATORY INFORMATION
This material has been categorized as having the following
SARA & WHMIS HAZARD CLASSIFICATIONS
hazard (s) as defined by SARA Title 111 regulations (40
CFR 370): acute
Canadian WHMIS classification: D1B, E
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 5 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
This material does not contain any substance which is
SARA SECTION 313 LISTED INGREDIENTS
subject to the reporting requirements of 40CFR 372
16. OTHER INFORMATION
The information and recommendations contained herein are based upon data believed to be correct. However, no
guarantee or warranty of any kind, express or implied, is made with respect to the information contained herein. It is
the user's obligation to determine the conditions of safe use of this product.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part A) Page 6 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part A)
MATERIAL SAFETY DATA SHEET
Date Prepared: February 1, 2008
1. PRODUCT/COMPANY IDENTIFICATION
Product Name: Product No:
201180 & 201181
BONSAL?B-7000 Epoxy Mortar And Grout (Part B)
201180 & 201181
ProSpec B-7000 Epoxy Mortar & Grout (Part B)
Emergency Telephone: Manufacturer's Name & Address:
800-424-9300 (Chemtrec) or Bonsal American Inc./an Oldcastle company
703-527-3887 (Outside USA) 8201 Arrowridge Blvd
Charlotte, NC 28273
Telephone Number for Information:
704-525-1621
2. EMERGENCY AND FIRST AID
This product is a liquid polamide adduct. When B-7000 (Part B)
EMERGENCY INFORMATION:
is mixed with B-7000 (Part A) it results in a mixture that is 100%
solids liquid. Inhalation may cause irritation to the moist mucous
membranes of the nose, throat and upper respiratory system or
may cause or may aggravate certain lung diseases or conditions.
Immediately flush eye thoroughly with water. Continue flushing
EYES:
eye for at least 15 minutes, including under lids, to remove all
particles. Get medical attention if irritation occurs.
Wash skin with water and soap or an approved cream. Seek
SKIN:
medical treatment if irritation or inflammation develops.
Remove person to fresh air. If breathing is difficult, administer
INHALATION:
oxygen. If not breathing, give artificial respiration. Seek medical
help if coughing and other symptoms do not subside. Inhalation
of large amounts of product requires medical attention.
Do not induce vomiting. If conscious, have the victim drink
INGESTION:
plenty of water and call a physician immediately.
3. COMPOSITION INFORMATION
This product is a heavy body colored liquid. Its major components
DESCRIPTION:
are:
0-3% CAS #112-57-2
Tetraethylenepentamine
0-10 % CAS #13463-67-7
Titanium Dioxide
Modified Polyamines 5-25% Proprietary
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 1 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
Fumed Silica 60-80% CAS #67762-90-7
Isophorene Diamine 1-5% CAS #112-57-2
4. HAZARDOUS INGREDIENTS
COMPONENT OSHA PEL ACGIH TLV-TWA NIOSH REL
(8-Hour TWA) (1995-1996) (8-Hour TWA)
-------------------- ------------------------- ------------------------ ------------------------
15 mg/m?total dust 10 mg/m?total dust
Titanium Dioxide
(CAS # 13463-67-7)
Tetraethylenepentamine (TEPA) as reported here is a complex mixture of TEPA and other
Tetraethylenepentamine
(CAS# 112-57-2) ethyleneamines. Some of these amines include triethylenetetramine (CAS # 112-24-3) and
diethylene-triamine (CAS # 111-40-0). The OSHA PEL and the ACGIH TLV for
diethylenetriamine is 1 ppm for an 8 hour TWA with a skin hazard notation.
5. HAZARD IDENTIFICATION
NOTE: Potential health effects may vary depending upon the
POTENTIAL HEALTH EFFECTS:
duration and degree of exposure. To reduce or eliminate health
hazards associated with this product, use exposure controls or
personal protection methods as described in Section 10.
(Acute/Chronic) Exposure may cause immediate or delayed
EYE CONTACT:
irritation or inflammation of the cornea. Eye contact by splashes
of wet product may cause effects ranging from slight to moderate
eye damage. Eye damage may be irreversible.
(Acute) Exposure to liquid product may cause drying of the skin
SKIN CONTACT:
with consequent mild irritation or more significant effects
attributable to aggravation of other conditions. Discomfort or
pain cannot be relied upon to alert a person to a hazardous skin
exposure.
(Chronic) Product coming in contact with wet skin or exposure
to wet product may cause skin irritation. Prolonged exposure
may cause skin damage.
(Acute/Chronic) Some individuals may exhibit an allergic
response upon exposure to product. The response may appear in
a variety of forms ranging from a mild rash to severe irritation.
(Acute) Exposure to product may cause irritation to the moist
INHALATION:
mucous membranes of the nose, throat and upper respiratory
system. Pre-existing upper respiratory and lung diseases may be
aggravated by inhalation of product.
(Acute/Chronic) Internal discomfort or ill effects are possible if
INGESTION:
swallowed.
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 2 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
Product is not recognized as a carcinogen by NTP, OSHA, or
CARCINOGENIC POTENTIAL:
IARC.
6. ACCIDENTAL RELEASE MEASURES
Contain material to prevent contamination of soil, surface water or ground water. Use dry clean-up methods that do
not disperse dust into the air or entry into surface water. Material can be used if not contaminated. Place in an
appropriate labeled container for disposal or use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in Section 12.
7. PHYSICAL/CHEMICAL DATA
Viscous liquid
APPEARANCE/ODOR: PHYSICAL STATE:
Odor: moderate amine
Appearance: colored
liquid
BOILING POINT: 212?F (100?C)
Not determined Not determined
VAPOR PRESSURE: VAPOR DENSITY:
dilutable
SOLUBILITY IN WATER:
1.5 ?3.0 Not determined
SPECIFIC GRAVITY EVAPORATION RATE:
(H2O = 1.0):
8. FIRE AND EXPLOSION
Not available
FLASH POINT: LOWER EXPLOSIVE LIMIT:
Not determined
Not combustible Not available
AUTO IGNITION UPPER EXPLOSIVE LIMIT:
TEMPERATURE:
Not determined Water spray may be ineffective.
FLAMMABLE LIMITS SPECIAL FIRE FIGHTING
Water spray may be used to cool
PROCEDURES:
closed containers to prevent
pressure build-up and possible
autoignition or explosion when
exposed to extreme heat. If water
is used, fog apparatus and full
protective clothing. Requires
self-contained breathing
apparatus.
Use extinguishers Keep this product away from
EXTINGUISHING UNUSUAL FIRE AND
appropriate for heat, sparks, flame, and other
MEDIA: EXPLOSION HAZARDS:
surrounding fire. sources of ignition (i.e., pilot
lights, electric motors, static
electricity). Invisible vapors can
travel to a source of ignition and
flash back. Do not smoke while
using this product. Keep
containers tightly closed when not
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 3 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
in use. Closed containers may
explode when overheated. Do not
apply to hot surfaces. Toxic
gases may form when this
product comes in contact with
extreme heat.
HAZARDOUS Carbon dioxide
COMBUSTION Carbon monoxide
PRODUCTS:
9. STABILITY AND REACTIVITY DATA
Product is normally stable at ambient temperatures and
STABILITY:
pressures.
Avoid contact with acids and oxidane containing compounds.
INCOMPATIBILITY (MATERIALS AND
CONDITIONS TO AVOID):
May produce hazardous decomposition products when exposed
HAZARDOUS DECOMPOSITION:
to extreme heat. Extreme heat includes, but is not limited to,
flame cutting, brazing, and welding.
Will not occur.
HAZARDOUS POLYMERIZATION:
10. PRECAUTIONS FOR HANDLING AND STORAGE
Keep dry until used. Handle and store in a manner so that
HANDLING AND STORAGE
airborne dust does not exceed applicable exposure limits. Use
adequate ventilation and dust collection. Use exposure control
and personal protection methods as described in Section 10.
Use dry clean-up methods that do not disperse dust into the air or
SPILLS:
entry into surface water. Material can be used if not
contaminated. Place in an appropriate container for disposal or
use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in
Section 10.
11. TOXICOLOGICAL INFORMATION
See Section 5 for Hazard Identification. No recognized unusual toxicity to plants and animals.
Conditions aggravated by exposure: Eye disease, Skin disorders and Chronic Respiratory conditions.
12. EXPOSURE CONTROLS/PERSONAL PROTECTION
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 4 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
Use local exhaust or general dilution ventilation to control fumes
RESPIRATORY PROTECTION:
to levels below applicable exposure limits. Minimize dispersal
into the air. Avoid breathing vapors.
If local or general ventilation is not adequate to control levels
below applicable exposure limits or when irritation or discomfort
occurs, use MSHA/NIOSH approved respirators.
Wear safety glasses with side shields or goggles to avoid contact
EYE PROTECTION:
with the eyes. In due to unpredictable environments, wear tight-
fitting unvented or indirectly vented goggles to avoid eye
irritation or injury. Contact lenses should not be worn when
handling this product.
Wear impervious abrasion- and chemical-resistant gloves, boots,
SKIN PROTECTION:
long-sleeved shirt, long pants or other protective clothing to
prevent skin contact. Promptly remove clothing with product or
clothing dampened with moisture mixed with product, and
launder before re-use. If contact occurs, wash areas contacted by
material with soap and water.
13. DISPOSAL CONSIDERATIONS
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND
DISPOSAL:
OR INTO ANY BODY OF WATER. All disposal methods must
be in compliance with all Federal, State/ Provincial and local
laws and regulations of unusable or contaminated materials.
Regulations may vary in different locations. Waste
characterizations and compliance with applicable laws are the
responsibility solely of the waste generator. Dispose of
packaging/containers according to local, state and federal
regulations.
IF THIS MATERIAL AS PACKAGED, BECOMES A WASTE, IT DOES NOT MEET THE CRITERIA FOR A HAZARDOUS
WASTE AS DEFINED BY THE ENVIRONMENTAL PROTECTION AGENCY UNDER THE AUTHORITY OF THE RESOURCE
CONSERVATION AND RECOVER ACT (40CFR 261), DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
14. TRANSPORTATION DATA
DOT proper shipping name: Amine, Liquid, Corrosive, N.O. S., (Ethylene amines)
"For US domestic ground transportation: Consumer Commodity, ORM-D". "DO NOT ship via airfreight. This
product is not packaged for air transportation."
For international shipment via the IMDG Code: "Amine, Liquid, Corrosive, N.O.S., (Ethyleneamines) 8, UN2735,
111, limited quantity, EmS F-A, S-B.
15. OTHER REGULATORY INFORMATION
This material has been categorized as having the following
SARA & WHMIS HAZARD CLASSIFICATIONS
hazard (s) as defined by SARA Title 111 regulations (40
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 5 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
CFR 370): acute
Canadian WHMIS classification: D1B, E
This material does not contain any substance which is
SARA SECTION 313 LISTED INGREDIENTS
subject to the reporting requirements of 40CFR 372
16. OTHER INFORMATION
The information and recommendations contained herein are based upon data believed to be correct. However, no
guarantee or warranty of any kind, express or implied, is made with respect to the information contained herein. It is
the user's obligation to determine the conditions of safe use of this product.
4/23/2008 Bonsal?B-7000 Epoxy Mortar and Grout (Part B) Page 6 of 6
?br>
ProSpec B-7000 Epoxy Mortar and Grout (Part B)
MATERIAL SAFETY DATA SHEET
Date Prepared: February 1, 2008
1. PRODUCT/COMPANY IDENTIFICATION
Product Name: Product No:
201181 & 201180
BONSAL?B-7000 Epoxy Mortar And Grout (Part D)
201181 & 201180
ProSpec Epoxy Mortar & Grout (Part D)
Emergency Telephone: Manufacturer's Name & Address:
800-424-9300 (Chemtrec) or Bonsal American Inc./an Oldcastle company
703-527-3887 (Outside USA) 8201 Arrowridge Blvd
Charlotte, NC 28273
Telephone Number for Information:
704-525-1621
2. EMERGENCY AND FIRST AID
This product is a powder. B-7000 (Part D) is mixed with B-7000
EMERGENCY INFORMATION:
(Part A and B). Inhalation may cause irritation to the moist
mucous membranes of the nose, throat and upper respiratory
system or may cause or may aggravate certain lung diseases or
conditions.
Immediately flush eye thoroughly with water. Continue flushing
EYES:
eye for at least 15 minutes, including under lids, to remove all
particles. Get medical attention if irritation occurs.
Wash skin with water and soap or an approved cream. Seek
SKIN:
medical treatment if irritation or inflammation develops.
Remove person to fresh air. If breathing is difficult, administer
INHALATION:
oxygen. If not breathing, give artificial respiration. Seek medical
help if coughing and other symptoms do not subside. Inhalation
of large amounts of this product requires medical attention.
Induce vomiting. Call a physician immediately.
INGESTION:
3. COMPOSITION INFORMATION
This product is a powder. Its major components are:
DESCRIPTION:
100% CAS# 67762-90-7
Fumed Silica
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 1 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
4. HAZARDOUS INGREDIENTS
COMPONENT ACGIH TLV-TWA
(1995-1996)
-------------------- ------------------------- ------------------------ ------------------------
Fumed Silica 10 mg/ m?total dust
5. HAZARD IDENTIFICATION
Dry powdered materials can build static electrical charges when
MAIN HAZARDS:
subjected to friction. Proper precautions should be taken when
using product in the presence of flammable or explosive gases
and liquids to prevent accidents.
(Acute/Chronic) Exposure may cause immediate or delayed
EYE CONTACT:
irritation or inflammation of the cornea. Eye contact by splashes
of wet product may cause effects ranging from slight to moderate
eye damage. Eye damage may be irreversible.
(Acute) Exposure to product may cause drying of the skin with
SKIN CONTACT:
consequent mild irritation or more significant effects attributable
to aggravation of other conditions. Discomfort or pain cannot be
relied upon to alert a person to a hazardous skin exposure.
(Chronic)Product coming in contact with skin may cause skin
irritation. Prolonged exposure may cause skin damage.
(Acute/Chronic) Some individuals may exhibit an allergic
response upon exposure to product. The response may appear in a
variety of forms ranging from a mild rash to severe irritation.
(Acute) Exposure to product may cause irritation to the moist
INHALATION:
mucous membranes of the nose, throat and upper respiratory
system. Pre-existing upper respiratory and lung diseases may be
aggravated by inhalation of product.
(Chronic) Inhalation exposure to product may cause delayed lung
injury including and aggravate other lung diseases or conditions.
(Acute/Chronic) Internal discomfort or ill effects are possible if
INGESTION:
swallowed.
Under some conditions (e.g., when heated to high temperatures in
SPECIAL HAZARD:
the presence of air), the product may form formaldehyde vapor.
Formaldehyde is: a potential cancer hazard; a known skin and
respiratory sensitizer; and, an irritant to the eyes, nose, throat,
skin and digestive system. Safe handling conditions may be
maintained by keeping vapor concentrations below occupational
exposure limits for formaldehyde.
Product is not recognized as a carcinogen by NTP, OSHA, or
CARCINOGENIC POTENTIAL:
IARC.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 2 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
6. ACCIDENTAL RELEASE MEASURES
Contain material to prevent contamination of soil, surface water or ground water. Use dry clean-up methods that do
not disperse dust into the air or entry into surface water. Material can be used if not contaminated. Place in an
appropriate labeled container for disposal or use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in Section 12.
7. PHYSICAL/CHEMICAL DATA
Fine Powder
APPEARANCE/ODOR: PHYSICAL STATE:
Odor: none
Appearance: white
1700?C
BOILING POINT: MELTING POINT:
>2230?C
Not Applicable
VAPOR DENSITY:
Insoluble
SOLUBILITY IN WATER:
1.8 g/cm?@ 20?C Not Applicable
SPECIFIC GRAVITY : EVAPORATION RATE:
8. FIRE AND EXPLOSION
Not Applicable Not Applicable
FLASH POINT: LOWER EXPLOSIVE LIMIT:
Not combustible Not Applicable
AUTO IGNITION UPPER EXPLOSIVE LIMIT:
TEMPERATURE:
Not applicable Water spray may be ineffective.
FLAMMABLE LIMITS SPECIAL FIRE FIGHTING
Water spray may be used to cool
PROCEDURES:
closed containers to prevent
pressure build-up and possible
autoignition or explosion when
exposed to extreme heat. If water
is used, fog apparatus and full
protective clothing. Requires
self-contained breathing
apparatus.
Use extinguishers Keep this product away from
UNUSUAL FIRE AND
appropriate for heat, sparks, flame, and other
EXTINGUISHING EXPLOSION HAZARDS:
surrounding fire. sources of ignition (i.e., pilot
MEDIA:
lights, electric motors, static
electricity). Invisible vapors can
travel to a source of ignition and
flash back. Do not smoke while
using this product. Keep
containers tightly closed when not
in use. Closed containers may
explode when overheated. Do not
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 3 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
apply to hot surfaces. Toxic
gases may form when this
product comes in contact with
extreme heat.
Unknown
HAZARDOUS
COMBUSTION
PRODUCTS:
9. STABILITY AND REACTIVITY DATA
Product is normally stable at ambient temperatures and
STABILITY:
pressures.
Avoid contact with strong oxidizing agents, bases and strong
INCOMPATIBILITY (MATERIALS AND
acids and epoxy hardeners under uncontrolled conditions.
CONDITIONS TO AVOID):
May produce hazardous decomposition products such as carbon
HAZARDOUS DECOMPOSITION:
dioxide and monoxide when exposed to extreme heat. Extreme
heat includes, but is not limited to, flame cutting, brazing, and
welding.
May not occur.
HAZARDOUS POLYMERIZATION:
10. PRECAUTIONS FOR HANDLING AND STORAGE
Keep dry until used. Handle and store in a manner so that
HANDLING AND STORAGE
airborne dust does not exceed applicable exposure limits. Use
adequate ventilation and dust collection. Use exposure control
and personal protection methods as described in Section 10.
Use dry clean-up methods that do not disperse dust into the air or
SPILLS:
entry into surface water. Material can be used if not
contaminated. Place in an appropriate container for disposal or
use. Avoid inhalation of dust and contact with skin and eyes. Use
exposure control and personal protection methods as described in
Section 10.
11. TOXICOLOGICAL INFORMATION
See Section 5 for Hazard Identification. No recognized unusual toxicity to plants and animals.
Conditions aggravated by exposure: Eye disease, Skin disorders and Chronic Respiratory conditions.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 4 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
12. EXPOSURE CONTROLS/PERSONAL PROTECTION
Use local exhaust or general dilution ventilation to control fumes
RESPIRATORY PROTECTION:
to levels below applicable exposure limits. Minimize dispersal
into the air. Avoid breathing vapors.
If local or general ventilation is not adequate to control levels
below applicable exposure limits or when irritation or discomfort
occurs, use MSHA/NIOSH approved respirators.
Wear safety glasses with side shields or goggles to avoid contact
EYE PROTECTION:
with the eyes. In due to unpredictable environments, wear tight-
fitting unvented or indirectly vented goggles to avoid eye
irritation or injury. Contact lenses should not be worn when
handling this product.
Wear impervious abrasion- and chemical-resistant gloves, long-
SKIN PROTECTION:
sleeved shirt, long pants or other protective clothing to prevent
skin contact. Promptly remove clothing or clothing dampened
with moisture mixed with product, and launder before re-use. If
contact occurs, wash areas contacted by material with soap and
water.
13. DISPOSAL CONSIDERATIONS
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND
DISPOSAL:
OR INTO ANY BODY OF WATER. All disposal methods must
be in compliance with all Federal, State/ Provincial and local
laws and regulations of unusable or contaminated materials.
Regulations may vary in different locations. Waste
characterizations and compliance with applicable laws are the
responsibility solely of the waste generator. Dispose of
packaging/containers according to local, state and federal
regulations.
IF THIS MATERIAL AS PACKAGED, BECOMES A WASTE, IT DOES NOT MEET THE CRITERIA FOR A HAZARDOUS
WASTE AS DEFINED BY THE ENVIRONMENTAL PROTECTION AGENCY UNDER THE AUTHORITY OF THE RESOURCE
CONSERVATION AND RECOVER ACT (40CFR 261), DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.
14. TRANSPORTATION DATA
Product is not hazardous under U.S. DOT.
15. OTHER REGULATORY INFORMATION
This material has been categorized as having the following
SARA & WHMIS HAZARD CLASSIFICATIONS
hazard (s) as defined by SARA Title 111 regulations (40
CFR 370): acute
Canadian WHMIS classification: D1B, E
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 5 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
This material does not contain any substance which is
SARA SECTION 313 LISTED INGREDIENTS
subject to the reporting requirements of 40CFR 372
16. OTHER INFORMATION
The information and recommendations contained herein are based upon data believed to be correct. However, no
guarantee or warranty of any kind, express or implied, is made with respect to the information contained herein. It is
the user's obligation to determine the conditions of safe use of this product.
?br>
4/23/2008 Bonsal B-7000 Epoxy Mortar and Grout (Part D) Page 6 of 6
?br>
ProSpec B-7000 Epoxy Mortar & Grout (Part D)
|