SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane Part A
Date of issue - 12/11/2002. SKLDPMA
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code SKLDPMA
Product Name Sika Liquid Damp Proof Membrane Part A
Product Description 2-component epoxy resin system.
Manufacturer/Supplier Sika Limited
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Epoxy resin ( No.Av. mol.wt. < 700) 25068-38-6 25.00% - 50.00% Xi, N R36/38, R43, R51/53
Aliphatic glycidyl ether 68609-97-2 2.50% - 10.00% Xi, N R38, R43, R51/53
Solvent Naptha (petroleum) heavy aromatic. 64742-94-5 2.50% - 10.00% Xn, N R51/53, R65, R66
3. HAZARD IDENTIFICATION
Main Hazards Irritating to eyes and skin.
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
4. FIRST AID MEASURES
Eye Contact Immediately flood the eye with plenty of water for at least 15
minutes, holding the eye open.
Obtain medical attention urgently.
Skin Contact Wipe off as much as possible with a clean dry cloth. Wash skin
thoroughly with soap and water.
If material proves difficult to remove, use suitable skin cleanser
(not solvent).
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before
re-use.
Ingestion Wash out mouth with water. Obtain medical attention.
Inhalation Remove from exposure. In cases of possible respiratory irritation
or if feeling unwell in cases of prolonged exposure,obtain medical
attention.
5. FIRE FIGHTING MEASURES
Extinguishing Media Not readily combustible.
Use foam, dry chemical or carbon dioxide.
Extinguishing Media - Not suitable Do not use water jet.
Special Hazards of Product Combustion will produce smoke,carbon dioxide and carbon
monoxide.
Protective Equipment for Fire-Fighting Wear full protective clothing and self-contained breathing
apparatus.
CM Version - 1 Page: 1/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane Part A
Date of issue - 12/11/2002. SKLDPMA
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Wear appropriate protective clothing.
Environmental Precautions and Clean-up Try to prevent the material from entering drains or water courses.
Methods
Spillages Contain and absorb using earth, sand or other inert material.
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Handling Use in well ventilated area.
Avoid contact with eyes, skin and clothing.
Storage Storage area should be: cool. dry.
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed . Keep away from
foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Control Measures Use of the basic principles of Industrial Hygiene will enable this
material to be used safely.
Respiratory Protection Respiratory protection not normally required.
Hand Protection Wear suitable impervious gloves. (butyl / nitrile type)
The insides of gloves must be kept scrupulously clean.
Eye Protection Chemical goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Paste.
Color Grey.
Odor Faint. Characteristic.
Flash Point 癈 112
Solubility - Water Insoluble.
4% at 20 癈.
Density (kg/m3) Approx. 1400 at 20 癈.
Autoignition Temperature 癈 500
Viscosity (at 20癈) Thixotropic paste
10. STABILITY AND REACTIVITY
Stability Stable under normal conditions.
Hazardous Decomposition Products Heating may produce: oxides of carbon. acrid smoke and irritating
fumes.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Low order of acute toxicity.
Eye irritation Irritating to the eyes.
Skin irritation Prolonged contact may cause irritation.
Sensitization - Skin The low molecular weight epoxy resin is a potential skin sensitiser.
CM Version - 1 Page: 2/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane Part A
Date of issue - 12/11/2002. SKLDPMA
12. ECOLOGICAL INFORMATION
Mobility The product is insoluble in water.
Persistence/degradability The product is expected to be not readily biodegradable.
Ecotoxicity This material is harmful to aquatic organisms.
13. DISPOSAL
Product Disposal Dispose of as Special Waste.
Arrange for disposal via a licensed waste contractor.
Container Disposal Dispose of containers with care.
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
UN : UN number 3082
UN : Proper shipping name Environmentally hazardous substances, liquid, n.o.s.
UN : Class 9
UN : Packing Group 3
ADR/RID : Number 3082
ADR/RID : Proper shipping name Environmentally hazardous substance, liquid, n.o.s.
contains Epoxy Resin
ADR/RID : Class 9
ADR/RID : Item Number 11(c)
ADR/RID : Hazard Identification Number 90
IMDG : Proper shipping name Environmentally hazardous substance, liquid, N.O.S.
contains Epoxy Resin
IMDG : Packing Group 3
IMDG : Class 9
IMDG : MFAG Number 9028
IATA : Proper shipping name Not hazardous for Air Transport
15. REGULATORY INFORMATION
Irritant, Dangerous for the environment
Label Requirements
Risk Phrases Irritating to eyes and skin.
May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
Safety Phrases Avoid contact with skin.
Wear suitable gloves.
Contains epoxy constituents. See information supplied by the
manufacturer.
CM Version - 1 Page: 3/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane Part A
Date of issue - 12/11/2002. SKLDPMA
16. OTHER INFORMATION
First Issue Date 12.11.2002
Revisions Highlighted Future revisions will incorporate such information as is required but
which is not available at this time.
Uses and Restrictions Customers are urged to ensure that the product is entirely suitable
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
UK Legislation Health and Safety at Work etc Act, 1974, and relevant Statutory
Provisions.
SI 2002/1689 Chemicals (Hazard Information and Packaging)
Regulations, 2002.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
UK Guidance Publications Approved Code of Practice - Management of Health and Safety at
Work, HSE.
General Approved Code of Practice to COSHH Regulations, HSE.
Footnote The information contained in this SDS corresponds to our level of
knowledge at the time of publication.All warranties are
excluded.Our most current General Sales Conditions shall apply.
Please consult the Technical Data Sheet prior to use.
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane, Part B
Date of issue - 12/11/2002. SKLDPMB
1. PRODUCT AND COMPANY IDENTIFICATION
Product Code SKLDPMB
Product Name Sika Liquid Damp Proof Membrane, Part B
Product Description 2-component epoxy resin based system.
Manufacturer/Supplier Sika Limited
Watchmead
Welwyn Garden City
Hertfordshire.
AL7 1BQ
tel. 01707 394444
Fax. 01707 329129
2. COMPOSITION/INFORMATION ON THE COMPONENTS
Preparation - Hazardous ingredients ( Europe )
Component CAS/EINECS Concentration Classification Risk Phrases
Benzyl Alcohol 100-51-6 10.00% - 25.00% Xn R20/22
Isophoronediamine 2855-13-2 2.50% - 10.00% C R21/22, R34, R43,
R52/53
Triethylenetetramine 112-24-3 2.50% - 10.00% C R21, R34, R43,
R52/53
2,4,6-Tri(dimethylaminomethyl) phenol 90-72-2 2.50% - 10.00% Xn R22, R36/38
Solvent Naptha (petroleum) heavy aromatic. 64742-94-5 2.50% - 10.00% Xn, N R51/53, R65, R66
3. HAZARD IDENTIFICATION
Main Hazards Causes burns.
May cause sensitisation by skin contact.
Harmful if swallowed.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
4. FIRST AID MEASURES
Eye Contact Immediately flood the eye with plenty of water for at least 15
minutes, holding the eye open.
Eyelids should be held away from the eyeball to ensure thorough
rinsing.
Obtain medical attention urgently.
Skin Contact Wipe off as much as possible with a clean dry cloth.
Wash skin thoroughly with soap and water.
If material proves difficult to remove, use suitable skin cleanser
(not solvent).
Solvents should not be used to clean skin because they may
increase the penetration of the material.
Contaminated clothing should be washed or dry-cleaned before
re-use.
Ingestion Do not induce vomiting.
Obtain medical attention.
Inhalation Remove from exposure.
In cases of possible respiratory irritation or if feeling unwell in
cases of prolonged exposure,obtain medical attention.
CM Version - 1 Page: 1/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane, Part B
Date of issue - 12/11/2002. SKLDPMB
5. FIRE FIGHTING MEASURES
Extinguishing Media Not readily combustible. Use foam, dry chemical or carbon dioxide.
Extinguishing Media - Not suitable Do not use water jet.
Special Hazards of Product Thermal decomposition or burning may release oxides of carbon,
nitrogen and other toxic gases and vapours.
Protective Equipment for Fire-Fighting Wear full protective clothing and self-contained breathing
apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Wear appropriate protective clothing.
Environmental Precautions and Clean-up Try to prevent the material from entering drains or water courses.
Methods
Spillages Contain and absorb using earth, sand or other inert material.
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Handling Mix in a well ventilated area.
Avoid contact with eyes, skin and clothing.
Storage Storage area should be: cool. dry.
Storage temperature should be controlled to between 5 and 25 癈.
Store in the original container securely closed . Keep away from
foodstuffs
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Control Measures Use of the basic principles of Industrial Hygiene will enable this
material to be used safely.
Respiratory Protection Respiratory protection not normally required.
Hand Protection Wear suitable impervious gloves. (butyl / nitrile type)
The insides of gloves must be kept scrupulously clean.
Eye Protection Chemical goggles.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Paste.
Color Brown.
Odor Ammoniacal.
pH Approx. 11 in water. (soluble phase)
Flash Point 癈 102
Solubility - Water Partially soluble. (40%)
Density (kg/m3) Approx. 1400 at 20 癈.
Viscosity (at 20癈) Thixotropic paste
CM Version - 1 Page: 2/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane, Part B
Date of issue - 12/11/2002. SKLDPMB
10. STABILITY AND REACTIVITY
Stability Stable under normal conditions.
Hazardous Decomposition Products Heating may produce: ammonia. oxides of carbon. oxides of
nitrogen. acrid smoke and irritating fumes.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Low order of acute toxicity.
Eye irritation This material is corrosive to the eye.
Skin irritation This material is corrosive to the skin.
Sensitization - Skin The possibility of allergic sensitisation should be considered.
12. ECOLOGICAL INFORMATION
Mobility A major part of the product will dissolve slowly in water.
Persistence/degradability The product is expected to be partially or slowly biodegradable.
Ecotoxicity This material is harmful to aquatic organisms.
13. DISPOSAL
Product Disposal Dispose of as Special Waste.
Arrange for disposal via a licensed waste contractor.
Container Disposal Dispose of containers with care.
Empty containers may contain hazardous residues.
Empty packaging should be removed by a licensed waste
contractor.
14. TRANSPORT INFORMATION
UN : UN number 1759
UN : Proper shipping name Corrosive solid, n.o.s.
UN : Class 8
UN : Packing Group 3
ADR/RID : Number 1759
ADR/RID : Proper shipping name Corrosive solid, N.O.S.
contains Triethylenetetramine
ADR/RID : Class 8
ADR/RID : Item Number 65(c)
ADR/RID : Hazard Identification Number 80
IMDG : Proper shipping name Corrosive liquid, N.O.S.
contains Triethylenetetramine
IMDG : Packing Group 3
IMDG : Class 8
IMDG : Ems Number 8-15
IATA : Proper shipping name Corrosive solid, N.O.S.
contains Triethylenetetramine
IATA : Packing Group 3
IATA : Class 8
CM Version - 1 Page: 3/4
SAFETY DATA SHEET
Sika Liquid Damp Proof Membrane, Part B
Date of issue - 12/11/2002. SKLDPMB
15. REGULATORY INFORMATION
Corrosive
Label Requirements
Risk Phrases Causes burns.
Harmful if swallowed.
May cause sensitisation by skin contact.
Harmful to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
Safety Phrases Avoid contact with skin.
In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
16. OTHER INFORMATION
First Issue Date 12.11.2002
Revisions Highlighted Future revisions will incorporate such information as is required but
which is not available at this time.
Uses and Restrictions Customers are urged to ensure that the product is entirely suitable
for their own purpose.It is the customer`s responsibilty to ensure
that a suitable and sufficient assessment of the risks created by
the use of the product is undertaken.
UK Legislation Health and Safety at Work etc Act, 1974, and relevant Statutory
Provisions.
SI 2002/1689: Chemicals (Hazard Information and Packaging)
Regulations, 2002.
SI 1999/437: The Control of Substances Hazardous to Health
Regulations
SI No. 972/1996: The Special Waste Regulations 1996
SI No 2839 1991 Environmental Protection (Duty of Care)
Regulations.
UK Guidance Publications Approved Code of Practice - Management of Health and Safety at
Work, HSE.
General Approved Code of Practice to COSHH Regulations, HSE.
Footnote The information contained in this SDS corresponds to our level of
knowledge at the time of publication.All warranties are
excluded.Our most current General Sales Conditions shall apply.
Please consult the Technical Data Sheet prior to use.
|