MATERIAL SAFETY DATA SHEET
Trade Name: Raven 405 - Part A
SECTION I: COMPANY INFORMATION
Company: RLS Emergency Telephone #: 800-424-9300
st
13105 East 61 Street South, Suite A Chemtrec
Broken Arrow, OK 74012
Revision Date: 10/10/07 Information Telephone #: 918-615-0020
800-324-2810
SECTION II: INGREDIENT INFORMATION
INGREDIENT CAS NUMBER PERCENT PEL TLV
Epoxy Resin 25085-99-8 > 70% N/E N/E
3 3
Silica, Amorphous, Fumed, Crystalline-free 67762-90-7 0 - 5% *6 mg/m *3 mg/m
N/E indicates "not established"
SARA Title III, Section 313 ingredients: None All ingredients are TSCA inventory listed.
*Note: The PEL and TLV for this ingredient are the TWA for respirable dust levels only. In this product, it is pre-dispersed
and not available as a dust. Therefore, under normal use conditions it is not considered a hazard.
SECTION III: PHYSICAL DATA
Boiling Point: > 200 deg F Specific Gravity: 1.4
Vapor Pressure: Not determined Melting Point: Not determined
Vapor Density: Not determined Evaporation Rate: Not determined
Solubility in Water: Negligible % Volatile by Volume: <1%
Appearance and Odor: White liquid with heavy paint consistency - mild epoxy odor
SECTION IV: FIRE & EXPLOSION HAZARD DATA
Flash Point: >200 deg F, PMCC Method OSHA/NFPA Fire Hazard Classification: Class III B
Extinguishing Media: Foam, CO2, Dry Chemical, Water Spray LFL: Not determined UFL: Not determined
Special Fire Fighting Procedures: The use of self-contained breathing apparatus is recommended for firefighters. Water
may be helpful in keeping adjacent containers cool. Avoid spreading burning liquids with water used for cooling purposes.
Unusual Fire and Explosion Hazards: Keep work areas free of hot metal surfaces and other source of ignition.
NFPA classification: Health: 2 Flammability: 1 Reactivity: 0
SECTION V: REACTIVITY DATA
Stability: Stable, will react with amines.
Incompatibility: Strong acids and bases, selected amines and oxidizing agents.
Hazardous Decomposition or Byproducts: Thermal decomposition in the presence of air may yield carbon monoxide,
carbon dioxide, phenolics, acids, aldehydes and other unidentified toxic and/or irritating compounds.
Hazardous Polymerization: Will not occur.
Raven 405 ?Part A
SECTION VI: HEALTH HAZARD DATA
Primary Routes of Entry:
EYES: May cause moderate eye irritation. Corneal injury is possible.
SKIN: May cause allergic skin reaction in susceptible individuals. Prolonged exposure likely to cause skin irritation.
Repeated exposure may cause skin irritation. A single prolonged exposure is not likely to result in the material being
absorbed through skin in harmful amounts.
INHALATION: Vapors are unlikely due to physical properties.
INGESTION: Moderately toxic, may be harmful if swallowed. No hazards anticipated from ingestion incidental to
industrial exposure.
SYSTEMIC and OTHER EFFECTS: Except for skin sensitization, repeated exposures to low molecular weight epoxy
resins of this type are not anticipated to cause any significant adverse effects.
Carcinogenicity: Contains no ingredient listed as a potential carcinogen or as a carcinogen per OSHA, ACGIH, NTP or
IARC at concentrations equal to or greater than 0.1%.
Emergency and First Aid Procedures:
EYES: Flush with large quantities of water for at least 15 minutes. Consult a physician.
SKIN: Wash thoroughly with soap and flowing water. Remove and wash contaminated clothing before reuse.
INHALATION: Remove to fresh air if effects occur. Consult a physician.
INGESTION: Seek immediate medical attention. Do not induce vomiting unless directed to do so by a physician.
SECTION VII: PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released or Spilled: Keep sources of ignition and hot metal surfaces isolated
from the spill. Material may flow slowly. Scrape into containers for disposal.
Waste Disposal Methods: Dispose of according to all local, state and federal regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed when not in use. Avoid prolonged or
repeated contact with skin. Do not handle or store near flame, heat or strong oxidants. Do not store in direct sunlight.
Avoid prolonged storage above 38 deg C (100 deg F).
SECTION VIII: CONTROL MEASURES
RESPIRATORY: Respiratory protection should not be needed. If exposure may or does exceed occupational exposure
limits, respiratory irritation is experienced, or during spray application, use a properly fitted MSHA/NIOSH approved
respirator fitted with organic vapor cartridges. In addition, spray application may require the use of paint pre-filters. If
sanding or grinding on cured material, use above respirator fitted with HEPA filters or a dust mask.
VENTILATION: General mechanical ventilation is sufficient for most conditions. Local exhaust ventilation may be
necessary for some operations.
EYES: Use chemical safety glasses, splash-proof eye goggles or goggles with full faceshield.
CLOTHING/GLOVES: Use nitrile or other impermeable chemical resistant gloves to prevent skin irritation. If potential for
skin contact is present, wear impervious, long-sleeved, body covering clothing and rubber boots.
OTHER PROTECTIVE EQUIPMENT: The availability of eye washes and safety showers in work areas is recommended.
SECTION IX: TRANSPORT DATA
Proper Shipping Name: Not regulated
Hazard Class: Not regulated by D.O.T. regulations
Identification Number: None
Packing Group: None
SECTION X: DISCLAIMER
RLS MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY INFORMATION PRESENTED
HEREIN, ALL OF WHICH IS PROVIDED "AS IS". TO THE MAXIMUM EXTENT PERMITTED BY LAW, RLS
EXPRESSLY EXCLUDES ALL WARRANTIES, OBLIGATIONS, REPRESENTATIONS, LIABILITIES, TERMS AND
CONDITIONS (WHETHER THEY ARE EXPRESS OR IMPLIED, OR ARISE IN CONTRACT, STATUTE, OR
OTHERWISE, AND IRRESPECTIVE OF THE NEGLIGENCE OF RLS, ITS EMPLOYEES OR AGENTS) IN
CONNECTION WITH THE INFORMATION PRESENTED HEREIN. RLS MAKES NO REPRESENTATIONS OR
WARRANTIES AS TO MERCHANTABILITY, FITNESS FOR PURPOSE, NONINFRINGEMENT OR CONFORMITY
WITH DESCRIPTION OR SAMPLE.
Raven 405 ?Part A
MATERIAL SAFETY DATA SHEET
Trade Name: Raven 405 - Part B
SECTION I: COMPANY INFORMATION
Company: RLS Emergency Telephone #: 800-424-9300
st
13105 East 61 Street South, Suite A Chemtrec
Broken Arrow, OK 74012
Revision Date: 4/29/08 Information Telephone #: 918-615-0020
800-324-2810
SECTION II: INGREDIENT INFORMATION
INGREDIENT CAS NUMBER PERCENT PEL TLV
3
Aliphatic Amine 1477-55-0 20 - 30% N/E 0.1 mg/m skin
Alkylphenol 84852-15-3 15 - 20% N/E N/E
Polyoxypropylene Diamine trade secret 7 - 12% N/E N/E
3 3
Silica, Amorphous, Fumed, Crystalline-free 67762-90-7 7 - 12% *6 mg/m *3 mg/m
Isophorone Diamine 2855-13-2 5 - 10% N/E N/E
3
Diethylenetriamine 111-40-0 5 - 10% 4 mg/m 1 ppm TWA
4,4'-Methylenebiscyclohexanamine 1761-71-3 1 - 5% N/E N/E
Mixed Cycloaliphatic Amines trade secret 1 - 5% N/E N/E
2,2-bis(4-hydroxyphenyl)propane 80-05-7 0 - 5% N/E N/E
Phenol 108-95-2 1 - 3% 5 ppm (skin) 5 ppm (skin)
N/E indicates "not established"
SARA Title III, Section 313 ingredients: 2,2-bis(4-hydroxyphenyl)propane All ingredients are TSCA inventory
listed.
*Note: The PEL and TLV for this ingredient are the TWA for respirable dust levels only. In this product, it is pre-dispersed
and not available as a dust. Therefore, under normal use conditions it is not considered a hazard.
SECTION III: PHYSICAL DATA
Boiling Point: > 200 deg F Specific Gravity: 1.1
Vapor Pressure: Not determined Melting Point: Not determined
Vapor Density: Not determined Evaporation Rate: Not determined
Solubility in Water: Negligible % Volatile by Volume: <1%
Appearance and Odor: Gel consistency with characteristic ammonia odor
SECTION IV: FIRE & EXPLOSION HAZARD DATA
Flash Point: >200 deg F, Setaflash Method OSHA/NFPA Fire Hazard Classification: Class III B
Extinguishing Media: Foam, CO2, Dry Chemical, Water Spray LFL: Not determined UFL: Not determined
Special Fire Fighting Procedures: The use of self-contained breathing apparatus is recommended for firefighters.
Water may be helpful in keeping adjacent containers cool.
Unusual Fire and Explosion Hazards: Keep work areas free of hot metal surfaces and other source of ignition. Sudden
reaction and fire may result if product is mixed with an oxidizing agent.
NFPA classification: Health: 3 Flammability: 1 Reactivity: 0
SECTION V: REACTIVITY DATA
Stability: Stable
Incompatibility: Strong acids and bases, selected epoxy resins and strong oxidizing agents.
Hazardous Decomposition or Byproducts: Thermal decomposition in the presence of air may yield carbon monoxide,
carbon dioxide, ammonia, aldehydes, ketones, nitrogen oxides and other unidentified toxic and/or irritating compounds.
Hazardous Polymerization: Will not occur.
Raven 405 ?Part B
SECTION VI: HEALTH HAZARD DATA
Primary Routes of Entry:
EYES: Severe eye irritant. May cause burns. Vapors may be irritating.
SKIN: Severe skin irritant. May cause injury to skin following prolonged or repeated contact. Repeated
exposure may cause sensitization of the individual.
INHALATION: Vapors/mists may be corrosive to the upper respiratory tract. Repeated or prolonged exposure
can result in lung damage. May cause respiratory tract sensitization and/or irritation of mucous membranes.
INGESTION: Not expected to be a relevant route of exposure. However, the material is corrosive and may
cause permanent damage to the mouth, throat and stomach.
SYSTEMIC and OTHER EFFECTS: Product can be alkaline, corrosive and irritating to skin, ears, eyes and
mucous membranes. Aliphatic amines can cause changes in the lungs, liver, kidneys and heart. May cause
injury upon prolonged contact and repeated contact.
Carcinogenicity: Contains no ingredient listed as a potential carcinogen or as a carcinogen per OSHA, ACGIH, NTP or
IARC at concentrations equal to or greater than 0.1%.
Emergency and First Aid Procedures:
EYES: Flush with large quantities of water for at least 15 minutes. Seek immediate medical attention.
SKIN: Wash immediately with soap and water. If irritation or sensitization occurs, remove individual from further
contact with material. Remove and wash contaminated clothing before reuse.
INHALATION: Remove to fresh air if effects occur. Consult a physician.
INGESTION: If this product is swallowed, administer one glass of water. Do not induce vomiting. Seek medical
attention immediately.
SECTION VII: PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material is Released or Spilled: Keep sources of ignition and hot metal surfaces isolated
from the spill. Material may flow slowly. Scrape into containers for disposal.
Waste Disposal Methods: Dispose of according to all local, state and federal regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed when not in use. Avoid breathing vapors
and prolonged or repeated contact with skin. Do not handle or store near flame, heat or strong oxidants. Do not store in
direct sunlight. Avoid prolonged storage above 38 deg C (100 deg F).
SECTION VIII: CONTROL MEASURES
RESPIRATORY: Respiratory protection should not be needed. If exposure may or does exceed occupational exposure
limits, respiratory irritation is experienced, or during spray application, use a properly fitted MSHA/NIOSH approved
respirator fitted with ammonia & methylamine cartridges. In addition, spray application may require the use of paint pre-
filters. If sanding or grinding on cured material, use above respirator fitted with HEPA filters or a dust mask.
VENTILATION: General mechanical ventilation is sufficient for most conditions. Local exhaust ventilation may be
necessary for some operations.
EYES: Use chemical safety glasses, splash-proof eye goggles or goggles with full faceshield.
CLOTHING/GLOVES: Use nitrile or other chemical resistant gloves. Wear clean, long-sleeved, body covering clothing
and rubber boots.
OTHER PROTECTIVE EQUIPMENT: The availability of eye washes and safety showers in work areas is recommended.
SECTION IX: TRANSPORT DATA
Proper Shipping Name: Amines, liquid, corrosive, N.O.S. (aliphatic amines)
Hazard Class: Corrosive Material - 8
Identification Number: UN 2735
Packing Group: III
SECTION X: DISCLAIMER
RLS MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO ANY INFORMATION PRESENTED
HEREIN, ALL OF WHICH IS PROVIDED "AS IS". TO THE MAXIMUM EXTENT PERMITTED BY LAW, RLS
EXPRESSLY EXCLUDES ALL WARRANTIES, OBLIGATIONS, REPRESENTATIONS, LIABILITIES, TERMS AND
CONDITIONS (WHETHER THEY ARE EXPRESS OR IMPLIED, OR ARISE IN CONTRACT, STATUTE, OR
OTHERWISE, AND IRRESPECTIVE OF THE NEGLIGENCE OF RLS, ITS EMPLOYEES OR AGENTS) IN
CONNECTION WITH THE INFORMATION PRESENTED HEREIN. RLS MAKES NO REPRESENTATIONS OR
WARRANTIES AS TO MERCHANTABILITY, FITNESS FOR PURPOSE, NONINFRINGEMENT OR CONFORMITY
WITH DESCRIPTION OR SAMPLE.
Raven 405 ?Part B
|