Thursday, February 05, 2009
Page 1 of 5
MSDS - Material Safety Data Sheet
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH
ANTI-GEL
MSDS No.: M7232
I. Basic Information:
Manufacturer: RADIATOR SPECIALTY COMPANY Contact: Robert Geer
Address: 600 RADIATOR ROAD Information Telephone Number: 704-684--181 1
City, ST Zip: INDIAN TRAIL, NC 28079 Emergency Contact: Rocky Mountain Poision Control Center
Country: Emergency Telephone Number: 303-623-5716
Emergency Restrictions:
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH ANTI-GEL
MSDS No.: M7232
Issue Date: 02/05/2009
Supersedes Date: 06/14/2006
II. Hazards Identification:
EMERGENCY OVERVIEW
Danger: Harmful or fatal if swallowed, eye and skin irritant, combustible.
OSHA Regulatory Status
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Potential Health Effects
Route(s) of Entry:
Absorption, Inhalation, and Ingestion.
Health Hazards (Acute and Chronic):
See signs and symptoms below
Signs and Symptoms:
Eye Contace: Irritant. Prolonged contact may cause conjunctivitis.
Skin Contact: Irritant. Defatting of tissue, dermatitis may occur.
Inhalation: Irritant to mucous membranes. Repeated exposure may cause narcosis..
Ingestion: HARMFUL OR FATAL IF SWALLOWED. May cause burns to mouth, throat & stomach.
Medical Conditions Generally Aggravated by Exposure:
Conditions aggravated by exposure may include skin and kidney disorders.
Other Health Warnings:
Vomiting and subsequent aspiration into the lungs may lead to chemical pneumonia and pulmonary edema which is a potentially fatal condition.
Potential Environmental Effects
Not Available
III. Composition/Information on Ingredients:
Chemical Name CAS No. % Range Trade Secret
Petroleum naphtha 64742-94-5 5.0 - 10.0
1,2,4-Trimethylbenzene 95-63-6 1.0 - 5.0
Aliphatic Hydrocarbon Solvent 8052-41-3 60.0 - 100.0
Ethylbenzene 100-41-4 < 0.1
Ethylhexanol 104-76-7 0.1 - 1.0
Mesitylene 108-67-8 3.0 - 7.0
Naphthalene 91-20-3 0.1 - 1.0
Trimethyl benzene 25551-13-7 0.1 - 1.0
Xylene (mixed isomers) 1330-20-7 1.0 - 5.0
Thursday, February 05, 2009
Page 2 of 5
MSDS - Material Safety Data Sheet
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH
ANTI-GEL
MSDS No.: M7232
IV. First Aid Measures:
Emergency and First Aid Procedures:
Eye Contact: Flush eyes with clean water for 15 minutes while lifting eyelids and get prompt medical attention.
Skin Contact: Wash with soap and water thoroughly. If adverse effects persist, get prompt medical attention. Launder contaminated clothing
before reuse.
Inhalation: Remove to fresh air. If breathing becomes difficult get prompt medical attention.
Ingestion: DO NOT INDUCE VOMITING! Call Poison Control Center, physician, or hospital emergency room immediately.
Note to Physicians:
N/E
V. Fire Fighting Measures:
Suitable Extinguishing Media:
Water Fog, Foam, Carbon Dioxide, Dry Chemical
Unsuitable Extinguishing Media:
Do not use forced water stream as this could cause the fire to spread.
Products of Combustion:
Toxic fumes, gases or vapors may evolve on burning. Vapors may be havier that air and may travel along the ground to a distant ignition source and
flash back. Toxic nitrogen oxides may evolve when burning. The alkyl nitrate contained in this product may undergo a self-accelerating exothermic
reaction if heated above 21癋. Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion.
Protection of Firefighters:
Wear self-contained positive pressure breathing apparatus and protective clothes.
VI. Accidental Release Measures:
Personal Precautions:
Eliminate all ignition sources. Persons not wearing protective equipment should be excluded from area of spill until clean up has been completed.
Environmental Precautions:
Prevent run-off to sewers, streams, or other bodies of water. If run-off occurs, notify proper authorities as required that a spill has occurred. Run off
to sewer may create fire or explosion hazard.
Methods for Containment:
Dike or contain spill and absorb with inert materials (sand, sawdust, absorbent sweeping compounds, rags, etc).
Methods for Cleanup:
Using a non-metalic scoop, place contaminated material into an approved chemical waste container. Where possible, vacuum spilled liquid using
an explosion proof vacuum to recover material.
Other Information:
Prevent run-off to sewers, streams, or other bodies of water. If run-off occurs, notify proper authorities as required that a spill has occured.
VII. Handling and Storage:
Handling Precautions:
Handling: Use with adequate ventilation and proper protective equipment. Wash throughly after handling. Do not used in confined area without
proper ventilation. Contact lenses may cause further damage in case of splash into eye. KEEP AWAY FROM CHILDREN AND ANIMALS!
Storage Precautions:
Storage: Store in cool, dry area, away from oxidizing agents and sources of ignition. Keep containers closed when not in use.
VIII. Exposure Controls/Personal Protection:
Thursday, February 05, 2009
Page 3 of 5
MSDS - Material Safety Data Sheet
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH
ANTI-GEL
MSDS No.: M7232
Chemical Name OSHA PEL ACGIH TLV Other Limits
Aliphatic Hydrocarbon Solvent 100 ppm 100 ppm Not Available
Petroleum naphtha N/E N/E 100 ppm
Mesitylene N/A N/A Not Available
1,2,4-Trimethylbenzene N/E 25 ppm Not Available
Xylene (mixed isomers) 100 ppm 100 ppm Not Available
Trimethyl benzene 25 ppm (TWA) 25 ppm (TWA) Not Available
Naphthalene 10 ppm 10 ppm Not Available
Ethylhexanol N/E N/E Not Available
Ethylbenzene 100 ppm 100 ppm Not Available
Engineering Controls:
See Section above for applicable exposure limits. Maintain adequate ventilation.
Avoid breathing vapors. In restricted areas, use approved chemical/mechanical filters designed to remove a combination of particles and vapor. In
confined areas, use approved air line type respirator or hood. A self-contained breathing apparatus is required for vapor concentrations above TLV
limits.
Personal Protective Equipment:
For prolonged exposure wear protective safety glasses, gloves, and apron.
IX. Physical and Chemical Properties:
Boiling Point: >300癋 Melting Point: N/A
Boiling Range: Not Available Freezing Point: Not Available
Solubility In Water: Slight Evaporation Rate (Butyl Acetate = 1): N.D.
Flash Point: 104癋 Flash Point Method: TCC
Odor Threshold: Not Available Appearance and Odor: Dark amber color with petroleum odor
Vapor Density (AIR = 1): N.D. Vapor Pressure (mm Hg.): N.D.
pH Range: Not Available Not Available
Partition Coefficient:
Not Available Auto-Ignition Temp: Not Available
Decomposition Temp:
Lower Explosive Limit: N/D Upper Explosive Limit: N/D
Specific Gravity (H20 = 1): 0.81
Other Information: N/D
X. Stability and Reactivity:
Stability:
Material is normally stable at moderately elevated temperatures and pressures.
Conditions to Avoid:
Avoid heat, sparks and flame. See Incompatible Material below.
Incompatible Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Smoke, carbon monoxide, carbon dioxide, aldehydes and other products of incomplete combustion.
Possibility of Hazardous Reactions:
Will not occur
Thursday, February 05, 2009
Page 4 of 5
MSDS - Material Safety Data Sheet
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH
ANTI-GEL
MSDS No.: M7232
XI. Toxicological Information:
Not Established
XII. Ecological Information:
Not Established
XIII. Disposal Considerations:
DISPOSAL: This container may be recycled in a recycling centers when empty. Before offering for recycling, empty the can or bottle by using the
product according to the label. If recycling is not available, wrap the container and discard in the trash. Dispose of unused product in accordance
with all local, state government and federal laws and regulations
XIV. Transport Information:
Shipping Name: Not Available
DOT Hazard Class: Not Available DOT Subsidiary Hazard Class: Not Available
UN/NA#: Not Available Not Available
Packing Group:
Transportation Information:
DOT Shipping Name: Not DOT regulated.
DOT Hazard Class: None
The DOT description is provided to assist in the proper shipping classification of this product and may not be suitable for all shipping purposes.
ICAO/IATA (US): Petroleum Products, n.o.s. (Mineral Spirits) Marine pollutant (Petroleum
naphtha).
Class: 3
UN number: UN1268
PG: III
International:
ICAO/IATA:
UN number: UN1268
Petroleum Products, n.o.s. (Mineral Spirits) Marine pollutant (Petroleum naphtha).
Class: 3
PG: III
IMDG:
UN number: UN1268
Petroleum Products, n.o.s. (Mineral Spirits) Marine pollutant (Petroleum naphtha).
Class: 3
PG: III
EmS: F-E, S-E
XV. Regulatory Information:
Thursday, February 05, 2009
Page 5 of 5
MSDS - Material Safety Data Sheet
Product Name: HEAVY DUTY COLD WEATHER CONDITIONER WITH
ANTI-GEL
MSDS No.: M7232
SARA 313 Reportable Chemicals.
Petroleum Naphtha - 64742-94-5
Xylene - 1330-20-7
1,2,4-Trimethylbenzene - 95-63-6
Naphthalene - 91-20-3
Ethylbenzene -100-41-4
USA TSCA: All components of this material are listed on the US TSCA Inventory.
This fuel additive is registered in the United States.
Warning: This product contains a chemical(s) known to the state of California to cause cancer and birth defects or other reproductive harm.
State RTK Chemicals:
Aliphatic hydrocarbon - 8052-41-3
Xylene - 1330-20-7
Naphthalene -91-20-3
Trimethylbenzene -25551-13-7
Ethylbenzene - 100-41-4
XVI. Other Information:
Liquid Gas Solid
Chemical State: X
Pure Mixture
Chemical Type: 2
X
Hazard Category: 2 0
Acute Chronic Fire
X X X
Pressure Reactive
Additional Manufacturer Warnings:
Do not used in confined area without proper ventilation. Contact lenses 2
may cause further damage in case of splash into eye. KEEP AWAY FROM
2
CHILDREN AND ANIMALS!
0
N/E: Not Established
N/D: Not Determined C
N/A: Not Applicable
N/AV: Not Available
Additional Product Information:
While Radiator Specialty Company believes this data is accurate as of the revision date, we make no warranty with respect to the
data and we expressly disclaim all liability for reliance thereon. The data is offered solely for information, investigation, and
verification. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or
disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance.
|