CITGO No. 2 Diesel Fuel, Low
Sulfur, All Grades
Material Safety Data Sheet
CITGO Petroleum Corporation
AG2DF
MSDS No.
P. O. Box 4689
Hazard Rankings
Houston, TX 77210 5/31/2006
Revision Date
HMIS NFPA
IMPORTANT: This MSDS is prepared in accordance with 29 CFR 1910.1200. Read this
MSDS before transporting, handling, storing or disposing of this product and forward this
2 0
Health Hazard *
information to employees, customers and users of this product.
Fire Hazard 2 2
Emergency Overview 0
Reactivity 0
Physical State Liquid.
* = Chronic Health Hazard
Transparent, clear to Characteristic,
Color Odor
yellow or red. kerosene-like.
WARNING! Protective Equipment
Combustible liquid; vapor may cause flash fire.
Minimum Recommended
Harmful or fatal if swallowed - can enter lungs and cause See Section 8 for Details
damage.
Can cause eye, skin or respiratory tract irritation.
May be harmful if inhaled or absorbed through the skin.
Overexposure can cause central nervous system (CNS)
depression and/or other target organ effects.
Possible Cancer Hazard (See Section 3)
Harmful to aquatic organisms.
SECTION 1. PRODUCT IDENTIFICATION
CITGO No. 2 Diesel Fuel, Low Sulfur, (832) 486-5940
Trade Name Technical Contact
All Grades or (918) 495-5939
Product Number Medical Emergency
Various (832) 486-4700
68476-34-6 (800) 424-9300
CAS Number CHEMTREC Emergency
(United States Only)
Motor fuels.
Product Family
No. 2-D Grade Diesel Fuel Oil (defined by ASTM D-975); Treated or Refined Diesel Fuel No.
Synonyms
2; Diesel No. 2; Diesel Motor Fuel No. 2; Diesel Oil (Medium); Grade 2 Distillate Fuel;
Hydrodesulfurized (HDS) Light Catalytically Cracked Distillate; Middle Distillates (Petroleum);
HDS Diesel; Hydrodesulfurized Medium Distillate; HDS Middle Distillate; C9-C16 Petroleum
Hydrocarbons; Ultra Low Sulfur Diesel.
SECTION 2. COMPOSITION
This product may be composed, in whole or in part, of any of the following refinery streams:
Diesel Fuel No. 2 [CAS No.: 68476-34-6]
Hydrodesulfurized Middle Distillate (petroleum) [CAS No.: 64742-80-9]
Hydrodesulfurized Light Catalytic Cracked Distillate (Petroleum) [CAS No.: 68333-25-5]
Kerosene [CAS No.: 8008-20-6]
Hydrodesulfurized Kerosine (Petroleum) [CAS No.: 64742-81-0]
This product contains the following chemical components:
Concentration (%)
Component Name(s) CAS Registry No.
MSDS No. Revision Date
AG2DF Page Number: 1
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
Nonane, all isomers Mixture 1 - 10
Trimethylbenzenes, all isomers 25551-13-7 0-2
Naphthalene 91-20-3 0-2
Biphenyl (Diphenyl) 92-52-4 0-2
Cumene 98-82-8 0-1
Ethylbenzene 100-41-4 0-1
SECTION 3. HAZARDS IDENTIFICATION
Also see Emergency Overview and Hazard Ratings on the top of Page 1 of this MSDS.
Major Route(s) of Entry Skin contact. Inhalation.
Signs and Symptoms of Acute Exposure
Breathing high concentrations may be harmful. Mist or vapor can irritate the throat and lungs.
Inhalation
Breathing this material may cause central nervous system depression with symptoms
including nausea, headache, dizziness, fatigue, drowsiness, or unconsciousness.
Eye Contact This material can cause eye irritation with tearing, redness, or a stinging or burning feeling.
Further, it can cause swelling of the eyes with blurred vision. Effects may become more
serious with repeated or prolonged contact.
This material can cause skin irritation. Symptoms include redness, itching, and burning of
Skin Contact
the skin. This material can be absorbed by the skin and produce central nervous system
depression (headache, nausea, fatigue and/or other symptoms including unconsciousness).
If the skin is damaged, absorption increases. Prolonged and/or repeated contact may cause
severe dermatitis and/or more serious skin disorders. Chronic symptoms may include
drying, swelling, scaling, blistering, cracking, and/or severe tissue damage.
Ingestion If swallowed, this material may irritate the mouth, throat, and esophagus. It can be absorbed
into the blood stream through the stomach and intestinal tract. Symptoms may include a
burning sensation of the mouth and esophagus, nausea and vomiting. In addition, it can
cause central nervous system effects characterized by dizziness, staggering, drowsiness,
delirium and/or loss of consciousness.
Because of the low viscosity, this material can enter the lungs directly by aspiration during
swallowing or subsequent vomiting. Aspiration of a small amount of liquid can cause severe
lung damage and/or death.
Chronic Health Effects Secondary effects of ingestion and subsequent aspiration into the lungs may cause
Summary pneumatocele (lung cavity) formation and chronic lung dysfunction.
This product contains petroleum middle distillates similar to those shown to produce skin
tumors on laboratory rodents following repeated application. All tumors appeared during the
latter portion of the typical 2-year lifespan of the animals. Certain studies have shown that
washing the exposed skin of the test animal with soap and water between treatments greatly
reduces the potential tumorigenic effects. These data suggest that good personal hygiene is
effective in reducing the risk of this potential adverse health effect.
This material and/or its components have been associated with developmental toxicity,
reproductive toxicity, genotoxicity, immunotoxicity, and/or carcinogenicity. Refer to Section
11 of this MSDS for additional health-related information.
Conditions Aggravated Disorders of the following organs or organ systems that may be aggravated by significant
exposure to this material or its components include: Skin, Respiratory System, Liver,
by Exposure
Kidneys, Central Nervous System (CNS)
Target Organs May cause damage to the following organs: kidneys, lungs, liver, mucous membranes, upper
respiratory tract, skin, central nervous system (CNS), eye, lens or cornea
Carcinogenic Potential
MSDS No. Revision Date
AG2DF Page Number: 2
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
This material may contain ethylbenzene and naphthalene at concentrations above 0.1%.
IARC has identified ethylbenzene and naphthalene as possibly carcinogenic to humans
(Group 2B) based on laboratory animal studies. The NTP has determined that naphthalene
is reasonably anticipated to be a human carcinogen based on sufficient evidence from
studies in experimental animals. NTP has determined that exposure to diesel exhaust
particulates, a complex mixture of combustion products of diesel fuel, is reasonably
anticipated to be a human carcinogen.
OSHA Hazard Classification is indicated by an "X" in the box adjacent to the hazard title. If no "X" is present,
the product does not exhibit the hazard as defined in the OSHA Hazard Communication Standard (29 CFR
1910.1200).
OSHA Physical Hazard Classification
OSHA Health Hazard Classification
Combustible Explosive Pyrophoric
Irritant Sensitizer X
X
Highly Toxic Water-reactive
Toxic Oxidizer
Flammable
Corrosive Carcinogenic Compressed Gas Organic Peroxide Unstable
SECTION 4. FIRST AID MEASURES
Take proper precautions to ensure your own health and safety before attempting rescue or providing first aid.
For more specific information, refer to Exposure Controls and Personal Protection in Section 8 of this MSDS.
Move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If
Inhalation
breathing is difficult, 100 percent humidified oxygen should be administered by a qualified
individual. Seek medical attention immediately. Keep the affected individual warm and at
rest.
Check for and remove contact lenses. Flush eyes with cool, clean, low-pressure water for at
Eye Contact
least 15 minutes while occasionally lifting and lowering eyelids. Do not use eye ointment
unless directed to by a physician. Seek medical attention if excessive tearing, irritation, or
pain persists.
Remove contaminated shoes and clothing. Flush affected area with large amounts of water.
Skin Contact
If skin surface is damaged, apply a clean dressing and seek medical attention. Do not use
ointments. If skin surface is not damaged, clean affected area thoroughly with mild soap and
water. Seek medical attention if tissue appears damaged or if pain or irritation persists.
Do not induce vomiting. If spontaneous vomiting is about to occur, place victim's head below
Ingestion
knees. If victim is drowsy or unconscious, place on the left side with head down. Never give
anything by mouth to a person who is not fully conscious. Do not leave victim unattended.
Seek medical attention immediately.
INHALATION: Inhalation overexposure can produce toxic effects. Monitor for respiratory
Notes to Physician
distress. If cough or difficulty in breathing develops, evaluate for upper respiratory tract
inflammation, bronchitis, and pneumonitis. Administer supplemental oxygen with assisted
ventilation, as required.
INGESTION: If ingested, this material presents a significant aspiration and chemical
pneumonitis hazard. Induction of emesis is not recommended. Consider activated charcoal
and/or gastric lavage. If patient is obtunded, protect the airway by cuffed endotracheal
intubation or by placement of the body in a Trendelenburg and left lateral decubitus position.
MSDS No. Revision Date
AG2DF Page Number: 3
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
SECTION 5. FIRE FIGHTING MEASURES
NFPA Class-II combustible liquid.
NFPA Flammability
Classification
Closed cup: AP 52癈 (AP 125癋). (Pensky-Martens.)
Flash Point
Upper Flammable Limit AP 7.5 %
Lower Flammable Limit AP 0.6 %
Autoignition >254癈 (>489癋)
Temperature
Hazardous Combustion Carbon dioxide, carbon monoxide, smoke, fumes, unburned hydrocarbons and oxides of
Products sulfur and nitrogen.
Special Properties Combustible Liquid! This material releases vapors when heated above ambient
temperatures. Vapors can cause a flash fire. Vapors can travel to a source of ignition and
flashback. A vapor and air mixture can create an explosion hazard in confined spaces such
as sewers. Use only with adequate ventilation. If container is not properly cooled, it can
rupture in the heat of a fire.
Extinguishing Media SMALL FIRE: Use dry chemicals, carbon dioxide, foam, or inert gas (nitrogen). Carbon
dioxide and inert gas can displace oxygen. Use caution when applying carbon dioxide or
inert gas in confined spaces.
LARGE FIRE: Use foam, water fog, or water spray. Water fog and spray are effective in
cooling containers and adjacent structures. However, water can cause frothing and/or may
not extinguish the fire. Water can be used to cool the external walls of vessels to prevent
excessive pressure, autoignition or explosion. DO NOT use a solid stream of water directly
on the fire as the water may spread the fire to a larger area.
Firefighters must use full bunker gear including NIOSH-approved positive pressure
Protection of Fire
self-contained breathing apparatus to protect against potential hazardous combustion or
Fighters
decomposition products and oxygen deficiencies. Evacuate area and fight the fire from a
maximum distance or use unmanned hose holders or monitor nozzles. Cover pooling liquid
with foam. Containers can build pressure if exposed to radiant heat; cool adjacent containers
with flooding quantities of water until well after the fire is out. Withdraw immediately from the
area if there is a rising sound from a venting safety device or discoloration of vessels, tanks,
or pipelines. Be aware that burning liquid will float on water. Notify appropriate authorities of
potential fire and explosion hazard if liquid enter sewers or waterways.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Take proper precautions to ensure your own health and safety before attempting spill control or clean-up. For
more specific information, refer to the Emergency Overview on Page 1, Exposure Controls and Personal
Protection in Section 8 and Disposal Considerations in Section 13 of this MSDS.
Combustible Liquid! Release can result in a fire hazard. Evacuate all non-essential personnel
from release area. Establish a regulated zone with site control and security. Eliminate all
ignition sources. Stop the leak if it can done without risk. A vapor-suppressing foam may be
used to reduce vapors. Properly bond or ground all equipment used when handling this
material. Avoid skin contact. Do not walk through spilled material. Verify that responders are
properly trained and wearing appropriate personnel protective equipment. Dike far ahead of a
liquid spills. Do not allow released material to entry waterways, sewers, basements, or
confined areas. This material will float on water. Absorb or cover with dry earth, sand or other
non-combustible material. Use clean, non-sparking tools to collect absorbed material. Place
spent sorbent materials, free liquids and other clean-up debris into proper waste containers
for appropriate disposal. Certain releases must be reported to the National Response Center
(800/424-8802) and state or regulatory authorities. Comply with all laws and regulations.
MSDS No. Revision Date
AG2DF Page Number: 4
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
SECTION 7. HANDLING AND STORAGE
Handling Combustible Liquid!
A static electrical charge can accumulate when this material is flowing through pipes, nozzles
or filters and when it is agitated. A static spark discharge can ignite accumulated vapors
particularly during dry weather conditions. Always bond receiving containers to the fill pipe
before and during loading. Always keep nozzle in contact with the container throughout the
loading process. Do not fill any portable container in or on a vehicle. Special precautions,
such as reduced loading rates and increased monitoring, must be observed during "switch
loading" operations (i.e., loading this material in tanks or shipping compartments that
previously containing gasoline or similar low flash point products).
Fire hazard increases as product temperature approaches its flash point. Keep container
closed and drum bungs in place. Remove spillage immediately from walking areas. Do not
handle or store near heat, sparks or other potential ignition sources. Do not handle or store
with oxidizing agents. Avoid breathing mist or vapor. Never siphon by mouth. Do not taste or
swallow. Avoid contact with eyes, skin and clothing. Use gloves constructed of impervious
materials and protective clothing if direct contact is anticipated. Provide ventilation to
maintain exposure potential below applicable exposure levels. Avoid water contamination.
Wash thoroughly after handling. Prevent contact with food or tobacco products.
When performing repairs and maintenance on contaminated equipment, keep unnecessary
persons from hazard area. Eliminate heat, flame and other potential ignition sources. Drain
and purge equipment, as necessary, to remove material residues. Remove contaminated
clothing. Wash exposed skin thoroughly with soap and water after handling.
Do not use this material as fuel for equipment, such as portable heaters, in enclosed areas.
Hazardous combustion products can cause death.
Protect the environment from releases of this material. Prevent discharges to surface waters
and groundwater. Maintain handling, transfer and storage equipment in proper working order.
Misuse of empty containers can be dangerous. Empty containers may contain material
residues which can ignite with explosive force. Cutting or welding of empty containers
can cause fire, explosion, or release of toxic fumes from residues. not pressurize or
Do
expose empty containers to open flame, sparks, or heat. Keep container closed and drum
bungs in place. All label warnings and precautions must be observed. Return empty drums
to a qualified reconditioner. Consult appropriate federal, state and local authorities before
reusing, reconditioning, reclaiming, recycling, or disposing of empty containers and/or waste
residues of this material.
Store in a cool, dry, well-ventilated place. Keep containers tightly closed. Do not store this
Storage
product near heat, flame or other potential ignition sources. Do not store with oxidizers. Do
not store this product in unlabeled containers. Do not puncture or incinerate containers.
Ground all equipment containing this material. All electrical equipment in areas where this
material is stored or handled must meet all applicable requirements of the NFPA's National
Electrical Code (NEC). Store and transport in accordance with all applicable laws.
SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Engineering Controls Provide ventilation or other engineering controls to keep the airborne concentrations of
vapor or mists below the applicable workplace exposure limits indicated below. All electrical
equipment should comply with the National Electric Code. An emergency eye wash station
and safety shower should be located near the work-station.
Personal Protective Personal protective equipment should be selected based upon the conditions under which
Equipment this material is used. A hazard assessment of the work area for PPE requirements should
be conducted by a qualified professional pursuant to OSHA regulations. The following
pictograms represent the minimum requirements for personal protective equipment. For
certain operations, additional PPE may be required.
MSDS No. Revision Date
AG2DF Page Number: 5
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
Eye Protection Safety glasses equipped with side shields are recommended as minimum protection in
industrial settings. Chemical goggles should be worn during transfer operations or when
there is a likelihood of misting, splashing, or spraying of this material. A suitable emergency
eye wash water and safety shower should be located near the work station.
Hand Protection Avoid skin contact. Use heavy duty gloves constructed of chemical resistant materials such
as Viton?or heavy nitrile rubber. Wash hands with plenty of mild soap and water before
eating, drinking, smoking, use of toilet facilities or leaving work. DO NOT use gasoline,
kerosene, solvents or harsh abrasives as skin cleaners.
Avoid skin contact. Wear long-sleeved fire-retardant garments (e.g., Nomex? while
Body Protection
working with flammable and combustible liquids. Additional chemical-resistant protective
gear may be required if splashing or spraying conditions exist. This may include an apron,
boots and additional facial protection. If product comes in contact with clothing, immediately
remove soaked clothing and shower. Promptly remove and discarded contaminated leather
goods.
Respiratory Protection Airborne concentration will determine the level of respiratiory protection required.
Respiratory protection is normally not required unless the product is heated or misted. For
known or anticipated vapor or mist concentrations above the occupational exposure
guidelines (see below), use a NIOSH-approved organic vapor respirator equipped with a
dust/mist prefilter if adequate protection is provided. Protection factors vary depending upon
the type of respirator used. Respirators should be used in accordance with OSHA
requirements (29 CFR 1910.134).
Warning! Use of this material in spaces without adequate ventilation may result in
General Comments
generation of hazardous levels of combustion products and/or inadequate oxygen levels for
breathing. Odor is an inadequate warning for hazardous conditions.
Occupational Exposure Guidelines
Substance Applicable Workplace Exposure Levels
Nonane, all isomers ACGIH (United States).
TWA: 200 ppm 8 hour(s).
Ethylmethylbenzene, all isomers Not available.
Trimethylbenzenes, all isomers ACGIH (United States).
TWA: 25 ppm 8 hour(s).
Naphthalene ACGIH (United States). Skin
TWA: 10 ppm 8 hour(s).
STEL: 15 ppm 15 minute(s).
OSHA (United States).
TWA: 10 ppm 8 hour(s).
Biphenyl (Diphenyl) ACGIH TLV (United States).
TWA: 0.2 ppm 8 hour(s).
OSHA PEL Z2 (United States).
TWA: 0.2 ppm 8 hour(s).
Cumene ACGIH (United States).
TWA: 50 ppm 8 hour(s).
OSHA (United States). Skin
TWA: 50 ppm 8 hour(s).
n-Propylbenzene Not available.
1, 2, 4 Trimethylbenzene Not available.
Ethylbenzene ACGIH (United States).
TWA: 100 ppm 8 hour(s).
STEL: 125 ppm 15 minute(s).
OSHA (United States).
TWA: 100 ppm 8 hour(s).
Xylene, all isomers ACGIH (United States).
TWA: 100 ppm 8 hour(s).
MSDS No. Revision Date
AG2DF Page Number: 6
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
STEL: 150 ppm 15 minute(s).
OSHA (United States).
TWA: 100 ppm 8 hour(s).
Diesel exhaust particulate Not available.
Benzene ACGIH (United States). Skin
TWA: 0.5 ppm 8 hour(s).
STEL: 2.5 ppm 15 minute(s).
OSHA (United States). Skin Notes: See Table Z-2 for exclusions
in 20 CFR 1910.1028 to the PEL.
TWA: 1 ppm 8 hour(s).
STEL: 5 ppm 15 minute(s).
Toluene ACGIH (United States). Skin
TWA: 50 ppm 8 hour(s).
OSHA (United States).
TWA: 200 ppm 8 hour(s).
CEIL: 300 ppm
PEAK: 500 ppm
Middle distillates, petroleum Not available.
Straight-run middle distillate (petroleum) ACGIH (United States, 1998). Skin
TWA: 100 mg/m 3
Distillates, petroleum, light catalytic cracked Not available.
Kerosene NIOSH REL (United States).
TWA: 100 mg/m 3 8 hour(s).
Hydrodesulfurized middle distillate (petroleum) Not available.
Hydrodesulfurized Kerosine (Petroleum) Not available.
Distillates, petroleum, hydrodesulfurized light Not available.
catalytic cracked
Diesel Fuel No. 2 ACGIH TLV (United States). Skin
TWA: 100 mg/m 3 8 hour(s).
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES (TYPICAL)
Characteristic, kerosene-like.
Odor
Color
Liquid. Transparent, clear
Physical State
to yellow or red.
AP 5 (Air = 1)
Vapor
AP 0.84 (Water = Not Applicable.
Specific Gravity pH
Density
1)
Not available.
Boiling Range 154?C (309?F) to 371?C (700?F) Melting/Freezing
Point
Volatility 840 g/l VOC (w/v)
<0.3 kPa (<2 mm Hg) (at 20癈)
Vapor Pressure
Viscosity
Very slightly soluble in cold water. (<0.1 % AP 3
Solubility in
w/w) (cSt @ 40癈)
Water
Closed cup: AP 52癈 (AP 125癋). (Pensky-Martens.)
Flash Point
Density = AP 7.0 lbs/gal.
Additional
Viscosity (ASTM D2161) = 30 - 40 SUS @ 100?F
Properties
SECTION 10. STABILITY AND REACTIVITY
Hazardous Polymerization Not expected to occur.
Stable.
Chemical Stability
Keep away from all ignition sources and strong oxidizing conditions.
Conditions to Avoid
Strong acids, alkalies, and oxidizers such as liquid chlorine, other halogens, hydrogen
Materials
peroxide and oxygen.
Incompatibility
MSDS No. Revision Date
AG2DF Page Number: 7
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
No additional hazardous decomposition products were identified other than the combustion
Hazardous
products identified in Section 5 of this MSDS.
Decomposition
Products
SECTION 11. TOXICOLOGICAL INFORMATION
For other health-related information, refer to the Emergency Overview on Page 1 and the Hazards Identification
in Section 3 of this MSDS.
Toxicity Data Diesel Fuel, No. 2
ORAL LD50, Acute: 12,000 to 17,500 mg/kg or 9.0 ml/kg [Rat]
DERMAL LD50, Acute: >5.0 ml/kg [Rabbit screen level].
DRAIZE EYE, Acute: Mild irritant [Rabbit]
DRAIZE DERMAL, Acute: Severe skin irritant [Rabbit].
BUEHLER DERMAL, Acute: Non-sensitizing [Guinea Pig]
14-Day DERMAL, Sub-chronic: 0% and 67% mortality at 4.0 and 8.0 ml/kg [Rabbit]
62-Week DERMAL, Chronic: 0.05 ml/kg 3x/week [Mouse] - Extreme skin irritation.
97-Week DERMAL, Chronic: 243 g/kg applied 3x/week [Mouse] - Extreme skin irritation.
Moderate increase in contact-point skin tumors.
MUTAGENICITY:
Modified Ames Assay: Negative. [Salmonella typhimurium]
In-vitro SCE Ovary Assay: Negative. [Chinese Hamster]
In-vitro Lymphoma Assay: Negative. [Mouse]
In-vivo Dominant Lethal Assay: Negative. [Mouse]
In-vivo Bone Marrow Assay: Clastogenic at 2.0 ml/kg and 6.0 ml/kg [Rat]
:
Diesel exhaust particulate
Lung tumor and lymphomas were identified in rats and mice exposed to unflitered diesel fuel
exhaust in chronic inhalation studies. Further, epidemiological studies have identified
increase incidences of lung cancer in US railroad workers and bladder cancer in bus and
truck drivers possibly associated with exposure to diesel engine exhaust. NTP has
determined that exposure to diesel exhaust particulates, a complex mixture of combustion
products of diesel fuel, is reasonably anticipated to be a human carcinogen. In addition,
NIOSH has identified complete diesel exhaust as a potential carcinogen.
:
Trimethylbenzenes, all isomers
Studies of Workers:
Levels of total hydrocarbon vapors present in the breathing atmosphere of these workers
ranged from 10 to 60 ppm. The TCLo for humans is 10 ppm, with somnolence and
respiratory tract irritation noted.
Studies in Laboratory Animals:
In inhalation studies with rats, four of ten animals died after exposures of 2400 ppm for 24
hours. An oral dose of 5 mL/kg resulted in death in one of ten rats. Minimum lethal
intraperitoneal doses were 1.5 to 2.0 mL/kg in rats and 1.13 to 12 mL/kg in guinea pigs.
Mesitylene (1, 3, 5 Trimethylbenzene) inhalation at concentrations of 1.5, 3.0, and 6.0 mg/L
for six hours was associated with dose-related changes in white blood cell counts in rats. No
significant effects on the complete blood count were noted with six hours per day exposure
for five weeks, but elevations of alkaline phosphatase and SGOT were observed. Central
nervous system depression and ataxia were noted in rats exposed to 5,100 to 9,180 ppm for
two hours.
Naphthalene:
Studies in Humans Overexposed to Naphthalene:
Severe jaundice, neurotoxicity (kernicterus) and fatalities have been reported in young
children and infants as a result of hemolytic anemia from over-exposure to naphthalene.
Persons with Glucose 6-phosphate dehydrogenase (G6PD) deficiency are more prone to the
hemolytic effects of naphthalene. Adverse effects on the kidney have also been reported
from over-exposure to naphthalene but these effects are believed to be a consequence of
hemolytic anemia, and not a direct effect.
Studies in Laboratory Animals:
MSDS No. Revision Date
AG2DF Page Number: 8
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
Hemolytic anemia has been observed in laboratory animals exposed to naphthalene.
Laboratory rodents exposed to naphthalene vapor for 2 years (lifetime studies) developed
non-neoplastic and neoplastic tumors and inflammatory lesions of the nasal and respiratory
tract. Cataracts and other adverse effects on the eye have been observed in laboratory
animals exposed to high levels of naphthalene. Findings from a large number of bacterial
and mammalian cell mutation assays have been negative. A few studies have shown
chromosomal effects (elevated levels of Sister Chromatid Exchange or chromosomal
aberrations) in vitro.
:
Biphenyl (Diphenyl)
Studies in Humans Overexposed to Biphenyl:
Evidence of adverse effects on the liver and the nervous system have been described in
studies of workers exposed to high levels for prolonged periods.
Studies in Laboratory Animals:
Evidence of adverse effects on the kidney and liver, and changes in whole blood (reduced
hematocrit and hemoglobin levels) have been observed in laboratory rodents following
subchronic exposure to biphenyl.
Genotoxicity & Carcinogenicity:
Biphenyl tested negative in bacteriological systems but some evidence of positive responses
have been reported in mammalian cell systems in the presence of metabolic activation. The
EPA has determined human and animal data are inadequate to classify the carcinogenic
potential of biphenyl.
:
Ethylbenzene
Effects from Acute Exposure:
ORAL (LD50), Acute: 3,500 mg/kg [Rat].
DERMAL (LD50), Acute: 17,800 uL/kg [Rabbit].
INTRAPERITONEAL (LD50), Acute: 2,624 mg/kg [Rat].
Effects from Prolonged or Repeated Exposure:
Findings from a 2-year inhalation study in rodents conducted by NTP were as follows: Effects
were observed only at the highest exposure level (750 ppm). At this level the incidence of
renal tumors was elevated in male rats (tubular carcinomas) and female rats (tubular
adenomas). Also, the incidence of tumors was elevated in male mice (alveolar and
bronchiolar carcinomas) and female mice (hepatocellular carcinomas). IARC has classified
ethyl benzene as "possibly carcinogenic to humans" (Group 2B). Studies in laboratory
animals indicate some evidence of post-implantation deaths following high levels of maternal
exposure. The relevance of these findings to humans is not clear at this time. Studies in
laboratory animals indicate limited evidence of renal malformations, resorptions, and
developmental delays following high levels of maternal exposure. The relevance of these
findings to humans is not clear at this time. Studies in laboratory animals indicate some
evidence of adverse effects on the liver, kidney, thyroid, and pituitary gland.
:
Middle distillates, petroleum
Long-term repeated (lifetime) skin exposure to similar materials has been reported to result in
an increase in skin tumors in laboratory rodents. The relevance of these findings to humans
is not clear at this time.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity Freshwater Toxicity:
Species: Juven. Am. Shad ( Squalius
Concentration: 2400 ppm Exposure: 48 hrs.
cephalus) Assay: TLM
Species: Bluegill ( Lepomis macrochirus)
Concentration: >127 ppm Exposure: 96 hrs.
Assay: LC50
Saltwater Toxicity
Species: Menhaden ( Brevoortia patronus)
Concentration: 10 ppm Exposure: 96 hrs.
Assay: LC50
MSDS No. Revision Date
AG2DF Page Number: 9
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
Concentration: 10 ppm Exposure: 96 hrs. Species: Grass Shrimp Assay: LC50
Environmental Fate If spilled, this material will normally evaporate. Hydrocarbon components may contribute to
atmospheric smog. If released to the subsoils, petroleum middle distillate fuels will strongly
adsorb to soils. Groundwater should be considered as an exposure pathway. Liquid and
vapor can migrate through the subsurface and preferential pathways (such as utility line
backfill) to downgradient receptors.
Middle distillates are potentially toxic to freshwater and saltwater ecosystems. Distillate fuels
will normally float on water. In stagnant or slow-flowing waterways, a hydrocarbon layer can
cover a large surface area. As a result, this oil layer can limit or eliminate natural atmospheric
oxygen transport into the water. With time, if not removed, oxygen depletion in the waterway
can cause a fish kill or create an anaerobic environment. Also, this coating action can also kill
plankton, algae, and water birds.
SECTION 13. DISPOSAL CONSIDERATIONS
Hazard characteristic and regulatory waste stream classification can change with product use. Accordingly, it is
the responsibility of the user to determine the proper storage, transportation, treatment and/or disposal
methodologies for spent materials and residues at the time of disposition.
Maximize material recovery for reuse or recycling. Recovered non-usable material may be
regulated by US EPA as a hazardous waste due to its ignitibility (D001) and/or its toxic
(D018) characteristics. In addition, conditions of use may cause this material to become a
hazardous waste, as defined by Federal or State regulations. It is the responsibility of the
user to determine if the material is a hazardous waste at the time of disposal. Transportation,
treatment, storage, and disposal of waste material must be conducted in accordance with
RCRA regulations (see 40 CFR Parts 260 through 271). Contact your regional US EPA
office for guidance concerning case specific disposal issues. State and/or local regulations
might be even more restrictive.
SECTION 14. TRANSPORT INFORMATION
The shipping description below may not represent requirements for all modes of transportation, shipping
methods or locations outside of the United States.
A U.S. Department of Transportation (DOT) regulated material. The following U. S. DOT
US DOT Status
hazardous materials shipping description applies to bulk packaged material that is transported
by highway or rail. Alternate shipping descriptions may be required for product transported by
marine vessel, air or other method and for non-bulk packaged material.
Diesel Fuel, Combustible liquid, NA1993, PG III
Proper Shipping Name
DOT Class: Combustible liquid with a flash Packing Group(s) III
Hazard Class
point greater than 37.8癈 (100癋).
NA 1993
UN/NA Number
Reportable Quantity A Reportable Quantity (RQ) has not been established for this material.
Placard(s) 128
Emergency Response
Guide No.
Not a DOT "Marine
MARPOL III Status
Pollutant" per 49 CFR
171.8.
MSDS No. Revision Date
AG2DF Page Number: 10
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
SECTION 15. REGULATORY INFORMATION
TSCA Inventory This product and/or its components are listed on the Toxic Substances Control Act (TSCA)
inventory.
The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires
SARA 302/304
facilities subject to Subparts 302 and 304 to submit emergency planning and notification
Emergency Planning
information based on Threshold Planning Quantities (TPQs) and Reportable Quantities
and Notification
(RQs) for "Extremely Hazardous Substances" listed in 40 CFR 302.4 and 40 CFR 355. No
components were identified.
The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires
SARA 311/312 Hazard
facilities subject to this subpart to submit aggregate information on chemicals by "Hazard
Identification
Category" as defined in 40 CFR 370.2. This material would be classified under the following
hazard categories:
fire, Acute (Immediate) Health Hazard, Chronic (Delayed) Health Hazard
This product contains the following components in concentrations above de minimis levels
SARA 313 Toxic
Chemical Notification that are listed as toxic chemicals in 40 CFR Part 372 pursuant to the requirements of Section
and Release Reporting 313 of SARA:
Naphthalene [CAS No.: 91-20-3] Concentration: 2%
Biphenyl (Diphenyl) [CAS No.: 92-52-4] Concentration: 2%
Ethylbenzene [CAS No.: 100-41-4] Concentration: 0.9%
The Comprehensive Environmental Response, Compensation, and Liability Act of 1980
CERCLA
(CERCLA) requires notification of the National Response Center concerning release of
quantities of "hazardous substances" equal to or greater than the reportable quantities (RQ's)
listed in 40 CFR 302.4. As defined by CERCLA, the term "hazardous substance" does not
include petroleum, including crude oil or any fraction thereof which is not otherwise
specifically designated in 40 CFR 302.4. Chemical substances present in this product or
refinery stream that may be subject to this statute are:
Naphthalene [CAS No.: 91-20-3] RQ = 100 lbs. (45.36 kg) Concentration: 2%
Cumene [CAS No.: 98-82-8] RQ = 5000 lbs. (2268 kg) Concentration: 0.9%
Ethylbenzene [CAS No.: 100-41-4] RQ = 1000 lbs. (453.6 kg) Concentration: 0.9%
Xylene, all isomers [CAS No.: 1330-20-7] RQ = 100 lbs. (45.36 kg) Concentration: 0.9%
Benzene [CAS No.: 71-43-2] RQ = 10 lbs. (4.536 kg) Concentration: 0.045%
Clean Water Act This material is classified as an oil under Section 311 of the Clean Water Act (CWA) and the
(CWA) Oil Pollution Act of 1990 (OPA). Discharges or spills which produce a visible sheen on waters
of the United States, their adjoining shorelines, or into conduits leading to surface waters must
be reported to the EPA's National Response Center at (800) 424-8802.
California This material may contain the following components which are known to the State of California
Proposition 65 to cause cancer, birth defects or other reproductive harm, and may be subject to the
requirements of California Proposition 65 (CA Health & Safety Code Section 25249.5):
Diesel exhaust particulate
Naphthalene: <2%
Ethylbenzene: <1%
Toluene: <0.1%
Benzene: <0.1%
New Jersey Diesel Fuel
Right-to-Know Label
As minimum requirements, CITGO recommends that the following advisory information be
Additional Remarks
displayed on equipment used to dispense diesel fuel. Additional warnings specified by various
regulatory authorities may be required: "Diesel Fuel DANGER: Combustible Liquid. Use
as a Motor Fuel Only. DO NOT FILL CONTAINERS THAT HAVE PREVIOUSLY
CONTAINED GASOLINE OR OTHER FLAMMABLE LIQUIDS. Sparks From static electricity
can ignite flammable vapor residues. PLACE CONTAINER ON GROUND. DO NOT FILL
ANY PORTABLE CONTAINER IN OR ON A VEHICLE. Containers must be metal or other
material approved for storing diesel fuel. Keep nozzle spout in contact with the container
during the entire filling operation. NO SMOKING! Do not leave nozzle unattended during
MSDS No. Revision Date
AG2DF Page Number: 11
5/31/2006 Continued on Next Page
CITGO No. 2 Diesel Fuel, Low Sulfur, All Grades
filling. HARMFUL OR FATAL IF SWALLOWED.If swallowed, do not induce vomiting. Call
Physician Immediately. Keep Out of Reach of Children. Avoid prolonged breathing of vapors.
Never siphon by mouth. Do not store in vehicle or living space. Store and use in a well
ventilated area. Do not use near heat, spark or flame. Keep container closed."
SECTION 16. OTHER INFORMATION
Refer to the top of Page 1 for the HMIS and NFPA Hazard Ratings for this product.
REVISION INFORMATION
5.0
Version Number
5/31/2006
Revision Date
Printed on 5/31/2006.
Print Date
ABBREVIATIONS
AP: Approximately EQ: Equal >: Greater Than <: Less Than NA: Not Applicable ND: No Data NE: Not Establishe
ACGIH: American Conference of Governmental Industrial Hygienists AIHA: American Industrial Hygiene Association
IARC: International Agency for Research on Cancer NTP: National Toxicology Program
OSHA: Occupational Safety and Health Administration
NIOSH: National Institute of Occupational Safety and Health
NPCA: National Paint and Coating Manufacturers Association HMIS: Hazardous Materials Information System
NFPA: National Fire Protection Association EPA: US Environmental Protection Agency
DISCLAIMER OF LIABILITY
THE INFORMATION IN THIS MSDS WAS OBTAINED FROM SOURCES WHICH WE BELIEVE ARE RELIABLE.
HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESSED OR IMPLIED
REGARDING ITS CORRECTNESS. SOME INFORMATION PRESENTED AND CONCLUSIONS DRAWN HEREIN ARE
FROM SOURCES OTHER THAN DIRECT TEST DATA ON THE SUBSTANCE ITSELF. THIS MSDS WAS PREPARED
AND IS TO BE USED ONLY FOR THIS PRODUCT. IF THE PRODUCT IS USED AS A COMPONENT IN ANOTHER
PRODUCT, THIS MSDS INFORMATION MAY NOT BE APPLICABLE. USERS SHOULD MAKE THEIR OWN
INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION OR PRODUCTS FOR THEIR
PARTICULAR PURPOSE.
THE CONDITIONS OR METHODS OF HANDLING, STORAGE, USE, AND DISPOSAL OF THE PRODUCT ARE
BEYOND OUR CONTROL AND MAY BE BEYOND OUR KNOWLEDGE. FOR THIS AND OTHER REASONS, WE DO
NOT ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE OR EXPENSE
ARISING OUT OF OR IN ANY WAY CONNECTED WITH HANDLING, STORAGE, USE OR DISPOSAL OF THE
PRODUCT.
***** END OF MSDS *****
|