Huntsman Advanced Materials Americas Inc.
P.O. Box 4980
The Woodlands, TX 77387-4980
8 am to 5 pm Phone: (800) 257-5547
24-Hour Emergency Phone: (800) 328-8501
International Emergency Phone: (409) 727-0831
Asia Pacific Emergency Phone: (65) 6336-6011
MSDS No: 2288
Effective Date: 2/12/08 Material Safety Data Sheet
1. PRODUCT IDENTIFICATION 1
1 1
Trade Name: EPIBOND 1559A
Material Code: FPC2181
Chemical Family: Filled Epoxy Resin
NFPA RATING
2. COMPOSITION / INFORMATION ON INGREDIENTS
O CAS No. CHEMICAL IDENTITY EXPOSURE LIMITS CARCINOGEN
S STATUS
H ACGIH OSHA MFR. IARC NTP OSHA
A TWA STEL PEL STEL
Confidential Bisphenol A Diglycidyl Ether NE NE NE NE NE NR NR NR
Resin
Concentration 60.00 - 100.00 % by wt
* Confidential polyphosphate NE NE NE NE NE NR NR NR
Concentration 10.00 - 30.00 % by wt
756-79-6 PHOSPHONIC ACID, METHYL-, NE NE NE NE NE NR NR NR
DIMETHYL ESTER
Common PHOSPHONIC ACID, METHYL-,
Name: DIMETHYL ESTER
Concentration 1.00 - 5.00 % by wt
Confidential ACRYLONITRILE BUTADIENE NE NE NE NE NE NR NR NR
STRYENE POLYMER
Concentration 5.00 - 10.00 % by wt
NE = Not Established NR = Not Reviewed * = OSHA Hazardous Ingredient
3. HAZARDS IDENTIFICATION
Emergency Overview: CAUTION! May cause eye irritation. Prolonged or repeated skin contact may cause irritation, and may
cause allergic skin reaction. Harmful if inhaled. Harmful if swallowed.
Primary Route(s) of Entry: Dermal, inhalation.
Potential Health Effects: Vapor or mist may possibly be harmful if inhaled. Substance may cause moderate irritation to eyes.
Substance may cause slight irritation to skin. Substance may possibly be harmful if ingested.
Printed: 3/12/2008 Page 1 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
Carcinogenicity (NTP, IARC, OSHA): The chemicals listed in Section 2 are not considered to be carcinogenic by NTP, IARC,
or OSHA.
Chronic: Repeated overexposure may cause kidney damage and may cause reproductive effects. Prolonged or repeated exposure
can cause allergic reaction.
4. FIRST AID MEASURES
Ingestion: Do not induce vomiting unless directed to do so by medical personel. Never give anything by mouth to an unconscious
person. Seek immediate medical attention.
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Destroy contaminated
shoes. Seek immediate medical attention.
Inhalation: Remove to fresh air. Seek immediate medical attention.
Eyes: Immediately flush eyes with water for at least 15 minutes. Seek immediate medical attention.
Note to Physician: Allergic dermatitis or respiratory response in susceptible individuals may be delayed. It may appear after
weeks or even months of frequent and prolonged contact.
Medical Conditions Aggravated by Exposure: Allergy, skin or eye conditions.
5. FIRE FIGHTING MEASURES
254癈 (489 癋)
Flash Point:
PMCC
Flash Point Method Used:
Fire Fighting Extinguishing Media: Carbon dioxide, dry chemical, water spray.
Fire Fighting Equipment: Use self-contained breathing apparatus and full protective clothing.
Fire and Explosion Hazards: Keep fire-exposed containers cool with water. Do not use a solid stream of water. A solid stream of
water can spread fire.
Hazardous Combustion Products: Decomposition and combustion products may be toxic.
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Clean-up all traces of spill. As much as possible shovel material into clean, dry containers. On
hard surfaces use absorbent material to pickup remainder and on loose surfaces shovel-up contaminated layer.
7. HANDLING AND STORAGE
Signal Word: CAUTION!
Precautions: Avoid contact with eyes, skin, or clothing. Wear eye protection and impervious gloves when handling. Wash
thoroughly after handling. Avoid breathing vapor or mist. Keep containers closed when not in use. Use only with adequate
ventilation. Do not take internally.
Printed: 3/12/2008 Page 2 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
Other Handling Information: In accordance with good industrial practice, handle with care and avoid unnecessary personal
contact. Avoid contact with eyes and prolonged or repeated skin contact. Do not inhale mists. Use with adequate ventilation. For
industrial use only.
Storage Information: MAXIMUM 35?C - Store indoors in a cool, dry area with adequate ventilation.
Additional Information: PLEASE READ TECHNICAL DATA SHEET BEFORE HANDLING THE PRODUCT. KEEP OUT
OF THE REACH OF CHILDREN. FOR INDUSTRIAL USE ONLY.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal Protective Equipment: Eye bath and safety shower should be available. Wear protective clothing.
Exposure Guidelines: Wash thoroughly after handling and before eating, drinking, or using tobacco products.
Skin Protection: Wear impervious gloves.
Respiratory Protection: Wear respirator (MSHA/NIOSH or approved equivalent) suitable for concentrations and type of air
contaminants encountered.
Eye Protection: Wear safety glasses or goggles.
Engineering Controls: Explosion-proof local exhaust ventilation at point of contaminant release.
Emergency Response Protection: Wear breathing apparatus (MSHA/NIOSH-approved, pressure demand, self-contained or
equivalent) and full protective gear.
9. PHYSICAL AND CHEMICAL PROPERTIES
Soft Paste
Appearance:
Blue
Color:
No Odor
Odor:
Negligible
Solubility in Water:
~ 90000 cps
Viscosity:
< 1 mm Hg at 20癈 (68 癋)
Vapor Pressure:
1.2 (Water =1)
Specific Gravity:
< 1 (Butyl Acetate = 1)
Evaporation Rate:
> 1 (Air = 1)
Vapor Density:
12 g/L (This is an estimated value.)
VOC:
Not Evaluated
Coefficient of water/oil:
10. STABILITY AND REACTIVITY
Conditions to Avoid: Elevated temperatures
Stability: Stable under normal conditions.
Incompatibility: Strong oxidizing agents and acids.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Printed: 3/12/2008 Page 3 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Acute Oral Effects (LD50): 840 - 2400 gm/Kg (rats) (component)
For Bisphenol A Diglycidyl Ether Resin: >10,000 mg/Kg (rats)
Acute Dermal Toxicity (LD50): 2 - 10 gm/Kg
For Bisphenol A Diglycidyl Ether Resin: >6,000 mg/Kg (rabbits)
Inhalation Toxicity (LC50): Not available
Sensitization: Skin sensitizer.
Skin Irritation: Slight irritation.
Eye Irritation: Moderate irritant.
12. ECOLOGICAL INFORMATION
Biodegradability: No information available.
Ecotoxicity: No information available.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Incinerate in approved site or facility in accordance with local, state and federal regulations. Avoid
personal contact during transfer and handling.
14. TRANSPORT INFORMATION
DOT: Non-Bulk
Not Regulated
Proper Shipping Name:
IMDG: Non-Bulk
Not Regulated
Proper Shipping Name:
TDG: Non-Bulk
Not Regulated
Proper Shipping Name:
IATA: Non-Bulk
Not Regulated
Proper Shipping Name:
15. REGULATORY INFORMATION
US Federal Regulations:
Occupational Safety and Health Act (OSHA): This Material Safety Data Sheet (MSDS) has been prepared in compliance with
the federal OSHA Hazard Communication Standard 29 CFR 1910.1200. This product is considered to be a hazardous chemical
under that standard.
Printed: 3/12/2008 Page 4 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
Resource Conservation and Recovery Act (RCRA): Not a hazardous waste under RCRA (40 CFR 261).
SARA Title III: Section 304 - CERCLA: Not listed.
SARA Title III: Section 311/312 - Hazard Communcation Standard (HCS): Immediate (acute) health hazard.
Delayed (chronic) health hazard.
SARA Title III: Section 313 Toxic Chemical List (TCL): This product does not contain a toxic chemical for routine annual
'Toxic Chemical Release Reporting' under Sec. 313 (40 CFR 372).
TSCA Section 8(b) - Inventory Status: Chemical components listed on TSCA Inventory.
TSCA Section 12(b) - Export Notification: This product does not contain any chemical(s) that are subject to a Section 12(b)
export notification.
International Regulations:
Australian Inventory Status: This product contains only chemicals which are currently listed on the Australian Inventory of
Chemical Substances.
Canadian Inventory Status: This product contains only chemicals that are currently listed on the Canadian Domestic Substance
List.
Canadian WHMIS: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
and the MSDS contains all the information required by the Controlled Products Regulations. D2A, D2B
European Inventory Status (EINECS): This product contains only chemicals that are currently listed on the European Inventory
of Existing Commercial Chemical Substances (EINECS).
Japanese Inventory Status: This product contains one or more chemicals currently not on the Japanese Ministry of International
Trade and Industry List of Existing and New Chemical Substances.
State Regulations:
California Proposition 65: The following is required composition information. This product contains the following chemical(s)
which are currently listed on the California list of Known Carcinogens and Reproductive Toxins:
Chemical Name: Cyclohexene, 4-ethenyl-
Common Name: 4-vinylcyclohexene
CAS Number: 100-40-3
Percent in Composition: 0.001 - 0.006 % by wt
Comment: Warning! This chemical is known to the State of California to cause cancer.
Chemical Name: 2- PROPENENITRILE
CAS Number: 107-13-1
Percent in Composition: 0.0001 - 0.0002 % by wt
Comment: Warning! This chemical is known to the State of California to cause cancer.
Pennsylvania Right-to-Know: The following is required composition information:
Chemical Name: Bisphenol A Diglycidyl Ether Resin
CAS Number: Confidential
Printed: 3/12/2008 Page 5 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: polyphosphate
CAS Number: Confidential
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: ACRYLONITRILE BUTADIENE STRYENE POLYMER
CAS Number: Confidential
Comment: Not on Pennsylvania Hazardous Substance List
Chemical Name: PHOSPHONIC ACID, METHYL-, DIMETHYL ESTER
Common Name: PHOSPHONIC ACID, METHYL-, DIMETHYL ESTER
CAS Number: 756-79-6
Comment: Not on Pennsylvania Hazardous Substance List
16. OTHER INFORMATION
2288
MSDS No:
12/07 update- update
Reason Issued:
Matthew Austin
Prepared By:
Matthew Austin
Approved By:
EH&S Chemist
Title:
Other Information: L/M Codes: F/-/KT/CA1 (F10021731) [F70]
Material Code: FPC2181
Disclaimer: The information and recommendations contained herein are based upon tests in controlled laboratory conditions, are
believed to be correct, and are provided for the sole purpose of hazard communication as part of Huntsman's product safety
program. This product has not been tested for, and therefore is not recommended or suitable for, uses for which prolonged contact
with mucous membranes, abraded skin, or blood is intended or likely, or for uses for which implantation within the human body is
intended, and Huntsman assumes no liability for any such uses.
The information and recommendations contained herein are not intended to constitute performance information concerning the
product, which is available in separate technical data sheets available from Huntsman upon request. Users are urged, and are urged
to urge others who may come in contact with the product, to obtain and consult data sheets prior to purchase, use, transportation or
storage of the product.
HUNTSMAN MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY, QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. HUNTSMAN'S LIABILITY IS
STRICTLY LIMITED TO REIMBURSEMENT OF BUYER'S PURCHASE PRICE, OR IN HUNTSMAN'S DISCRETION
REPLACEMENT, OF THE PRODUCT IN RESPECT OF WHICH SUCH CLAIM IS MADE. HUNTSMAN'S LIABILITY IS
STRICTLY LIMITED BY LEGAL NOTICES IN TECHNICAL DATA SHEETS, PRODUCT LITERATURE, AND/OR SALE
DOCUMENTS. The foregoing DISCLAIMERS and LIMITATION OF LIABILITY supercede inconsistent or contradictory
provisions in Buyer's documents.
USER SHOULD CONSULT A LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENTAL AGENCY TO DETERMINE
THE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE PRODUCT. HUNTSMAN
DOES NOT UNDERTAKE TO FURNISH ADVICE ON SUCH MATTERS.
NO PERSON OR ORGANIZATION EXCEPT A DULY AUTHORIZED HUNTSMAN EMPLOYEE IS AUTHORIZED TO
PROVIDE OR MAKE AVAILABLE DATA SHEETS FOR HUNTSMAN PRODUCTS. DATA SHEETS FROM
UNAUTHORIZED SOURCES MAY CONTAIN INFORMATION THAT IS NO LONGER CURRENT OR ACCURATE. NO
Printed: 3/12/2008 Page 6 of 7
EPIBOND 1559A Huntsman Advanced Materials
Effective Date: 2/12/08 Americas, Inc. (LA)
PART OF THIS DATA SHEET MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM, OR BY ANY MEANS,
WITHOUT PERMISSION IN WRITING FROM HUNTSMAN. ALL REQUESTS FOR PERMISSION TO REPRODUCE
MATERIAL FROM THIS DATA SHEET SHOULD BE DIRECTED TO HUNTSMAN, MANAGER, PRODUCT SAFETY AT
THE ABOVE ADDRESS.
Printed: 3/12/2008 Page 7 of 7
|