MSDS BC ProFloor Platinum
Compliant with EEC directives and amendments
1. Identification of the substance and of the Company
Trade name : BC-ProFloor PLatinum
Product use : Protective coating (see technical description)
Manufacturing company : B-Chemicals sprl
34,Rue de Le Mesnil
B-5670 Viroinval Belgium Europe
Service : B-Chemicals
tel : +32 475 662 666
fax : +32 60 390 751
Emergency : tel : +32 475 951 293 Anti poison center Belgium : 070 245 245
Distributor :
2. Composition and information on ingredients
Chemical characterization : Fluorocarbon polymer in solvent
Hazardous ingredients :
Name : Isopropyl acetate & propane 鈥?2-ol
CAS N掳 108-21-4 Isopropyl acetate Xi,F; R11-36-66-67 de 30-50%
EINECS :203-561-1
CAS N掳 67-63-0 Propane- 2-ol Xi,F ; R11-36-67 de 30-50%
EINECS/200-661-7
3. Hazards identification
The principal hazards of the product as supplied here :
Xi.: Irritating
Security phrases: R36-R67
Very Flammable: : R 11
R36.:Irritating to eyes
R67.:Harmful when inhaled, may cause diziness or vertigo
4. First Aid measures
General recommendations :
In case of doubt, or if certain symptoms persist, please contact a physician immediately. DO
NOT induce vomiting or ingestion in case a person is unconscious.
On contact with eyes :
Remove contact lenses. Flush with water during at least 10 minutes. Obtain immediate
medical attention.
On skin contact :
Remove soiled clothing. Flush with water during at least 10 minutes. Use appropriate
detergent if necessary. Obtain immediate medical attention.
If inhaled :
Remove person to fresh air in a calm place. Obtain medical attention.
On ingestion :
Ingestion: In case of accidental ingestion, remove person to calm place. Obtain immediate
medical attention. DO NOT induce vomiting.
Inhalation: Remove to fresh air. If rapid recovery does not occur, transport to nearest medical
facility for additional treatment.
5. Fire fighting measures
Suitable extinguishing media :
Carbon dioxide, foam, dry powder or fine water spray. Water can be used to cool containers
exposed to fire.
Unsuitable extinguishing media :
Do not use water in a jet.
Hazards during fire figthing :
None known.
Special protective equipment - procedures :
Wear full protective clothing and self-contained breathing apparatus..
Hazardous combustion products :
Silicium dioxide, carbon dioxide, metal products, incompletely consumed carbon traces.
6. Accidental release measures
Personal precautions :
Wear proper protective equipment.
Precautions to protect the environment :
DO NOT empty into drains. Prevent from spreading or entering into drains, ditches or rivers
by using sand, earth or other appropriate barriers. Inform local authorities if this cannot be
prevented. Follow local rules and procedures.
Methods for cleaning up :
Determine the need to evacuate or isolate the area according to local emergency/safety plan.
Eliminate all possible sources of ignition. Very large spills should be contained by bunding,
etc. procedures. Mop, wipe or soak up with absorbent, non combustible material and place in
a container with a lid. The spilled product may produce a slippery surface.
7. Handling and storage
Advice on safe handling :
General ventilation is required. Local ventilation is required. Avoid skin and eye contact. Do
not breathe vapour. Avoid eating, drinking or smoking during use. Observe rules and
procedures with regard to protective clothing.
Advice on storage :
Store in a flameproof, well ventilated area. It is recommended to keep ambient temperature
within range of 0掳 - 30掳 C. Electrostatic charges may be generated during transfer of product
from its container. Ensure that all
equipment is electrically earthed. Keep containers tightly closed.
Unsuitable packaging materials :
None known.
Specific technical recommendations :
None known.
8. Exposure controls - Personal protection
Engineering controls :
Ventilation. Please refer to section 7.
Exposure controls for hazardous components :
Name : n/a CAS N掳 : n/a Exposure limits : n/a
Personal protection equipment :
Respiratory protection :
Please refer to section 7 with regard to ventilation. Suitable respiratory protection should be
worn if the product is used in large quantities, confined spaces or in other circumstances
where the OEL may be approached or exceeded.
Hand protection :
Chemical protective gloves (nitril rubber, neoprene or latex) should be used. It may be useful
to apply protective handcream to exposed skin. DO NOT apply this type of cream AFTER
exposing skin to product.
Eye protection :
Face shield or safety goggles are indicated.
Skin protection :
Wear impervious overalls in circumstances where significant skin contact can occur.
Hygiene measures :
Exercise good industrial hygiene practice. Refrain from eating, drinking or smoking during
application or use of product.
Additional information :
None known.
9. Physical and chemical properties
Appearance :
Form : Colour : Odour :
Liquid Colorless Slight isopropylalcohol odour
Other data :
Boiling point - range : 82掳C
Melting point - range : n/a
Flash point : 4掳 C
Lower flammable limits : n/a
Upper flammable limits : n/a
Autoignition temperature : >425掳C / 806掳F (ASTM E-659)
Explosive properties : None
Vapour pressure : Typical 100 Pa at 20掳C / 68掳F
Specific density : +/- 0,79 kg/m鲁 at 15掳C / 59掳F (water=1)
Viscosity : 1.14mm虏/s at 25掳C (ASTM D -445)
VOC content : n/a
Molecular weight : n/a
Oxidizing properties : No
The above information is not intended for use in preparing product specifications. Contact B-
Chemicals before writing specifications.
10. Stability and reactivity
Stability :
Stable under normal usage conditions. Please refer to section 7.
Conditions to avoid :
None known.
Materials to avoid :
Can react with strong oxidizing agents.
Hazardous decomposition products :
Please refer to section 11.
11. Toxicological information
On contact with eyes :
Irritating.
On skin contact :
Repeated or prolonged contact may cause defatting of skin, leading to dermatitis. Can irritate
on prolonged or repeated contact.
If inhaled :
Tiniest amounts that get into the lung by swallowing or subsequent vomitting may lead to a
pulmanory oedema or pneumonia
At high concentrations, it may cause dizziness, drowsiness, confusion, headaches, nausea, and
may lead to unconsciousness under heavy.
exposure. May cause burns in upper respiratory channels.
On ingestion :
Small amounts that are ingested because they stick to fingers have no effect. Large amounts
that are ingested orally can cause temporary intestinal disturbances and may cause burns in
the bowels.
12. Ecological information
Environmental fate and distribution :
The organic components contained in the product are biodegradable, however they are not
classified as readily biodegradable. Organic solvents may evaporate into the atmosphere,
where they degrade..
Ecotoxicity effects :
This product is potential pollutant for the aquatic environment. Use best efforts to avoid that
important quantities find their way into sewers and surface waters.
LC-50 + 100 mg/l (Vertebrata)
EC-50 + 100mg/l ( activated sludge)
Bioaccumulation :
None known.
Fate and effects in waste water treatment plants :
No adverse effects on bacteria are predicted.
13. Disposal considerations
Product disposal :
This product must be disposed of as hazardous waste. Please refer also to section 7 with
regard to preserving the environment.
Packaging disposal :
Dispose of in accordance with local regulations.
14. Transport information
Road - Rail :
CLASS ADR/ RID 3 Flammable liquid
Indice Kemler : 33
UN N掳 : 1993
Proper shipping name : 1993 Flammable liquid, n.o.s. (Isopropylacetate, Isopropanol)
Class : 3.31 (C)
Packing group : II
Trem-card : N掳 30G35-B
Hazard Labels : 3
Sea transport (IMDG) :
UN N掳 : 1993
Proper shipping name : Flammable Liquid,N.O.S.(Isopropylacetate, Isopropanol)
Class IMDG : 3
LABEL: II
Medical first aid GUIDE (MFAG) : refer to emergency action table MFAG
Emergency schedule : 3-07
Marine pollutant : no
Hazard Labels : Flammable liquid
Air transport (ICAO)-TI et IATA-DGR
UN N掳 : 1993
Proper shipping name : Flammable Liquid , N.O.S. (ISOPROPYLACETATE,
ISOPROPANOL)
Class : 3
Packing group : II
Harard Label : Flammable liquid
15. Regulatory information
Labelling according to EEC directive :
Symbols CE :
Xi.: Irritating
F.: Highly Flammable
R-phrases :
R11 Highly Flammable
R36 Irritating for the eyes
R65 Harmful : may cause lung damage if swallowed
R67 Vapours may cause drowsiness and dizziness
S-phrases :
S23 Do not breathe fumes/vapour.
S24/25 Avoid skin and eye contact
S36 Wear suitable protective clothing.
S62 If swallowed, do not induce vomiting: seek medical advice immediately and show this
container or label.
S2 Keep out of the reach of children.
National legislation - regulations : N/A
Ozone depleting chemicals :
No ozone depleting chemicals are present or used in manufacture.
16. Other information
This Material Safety Data Sheet (MSDS) was prepared in compliance with EEC directives
and their relevant amendments, on the approximation of laws, regulations and administrative
provisions relative to the classification, packaging and labelling of dangerous substances and
preparations.
It is the responsibility of persons in receipt of this MSDS to ensure that the information
contained herein is properly read and understood by all people who may use, handle, dispose
or in any way come in contact with the product. If the recipient subsequently produces a
formulation containing the product described in this MSDS, it is the recipients sole
responsibility to ensure the transfer of all relevant information from the B-Chemicals MSDS
to their own MSDS in compliance with EEC regulations and directives.
All information and instructions provided in this MSDS are based on the current state of
scientific and technical knowledge at the date indicated on the present MSDS. B-Chemicals
shall not be held responsible for any defect in the product covered by this MSDS, should
existence of such defect not be detectable considering the current state of scientific and
technical knowledge. B-Chemicals shall also not be held responsible for damages that result
from the usage of this product.
As stated above, this MSDS has been prepared in compliance with applicable European law.
If you purchase this material outside Europe, where compliance laws may differ, you should
receive from your local supplier an MSDS applicable to the country in which the product is
sold and intended to be used. Please note that the appearance and content of the MSDS may
vary - even for the same product - between different countries, reflecting the different
compliance requirements. Should you have any questions, please refer to your local supplier.
|