Material Safety Data Sheet
Motorcycle Fuel System Cleaner 2 Stroke 250 ml
1. Identification of the material and supplier
Names
Motorcycle Fuel System Cleaner 2 Stroke 250 ml
Product name :
2739
Australia Code :
1581
German Code :
HYDROCARBONS, LIQUIDS, N.O.S. (Naphtha (petroleum), hydrodesulfurized
ADG :
heavy)
Supplier
: MOTORACTIVE
Supplier/Manufacturer
Unit 35 Slough Business Park, Holker Street
Silverwater NSW 2128
Tel : (02) 9737 9422
Fax : (02) 9737 9414
: (02) 9737 9422
Emergency telephone
number
Uses
: Industrial applications.
Area of application
: Additive.
Material uses
: Liquid.
Product type
2. Hazards identification
: R10
Classification
Carc. Cat. 2; R45
Xn; R65
N; R51/53
: R10- Flammable.
Risk phrases
R45- May cause cancer.
R65- Also harmful: may cause lung damage if swallowed.
R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
: S53- Avoid exposure - obtain special instructions before use.
Safety phrases
S61- Avoid release to the environment. Refer to special instructions/safety data sheet.
: HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
Statement of
hazardous/dangerous nature
3. Composition/information on ingredients
: Yes.
Mixture
Ingredient name CAS number Concentration
Naphtha (petroleum), hydrodesulfurized heavy 64742-82-1 60 - 100
Solvent naphtha (petroleum), heavy arom. 64742-94-5 1-5
Hydrocarbyl amine Not available. 1-5
Alcohol propoxylate Not available. 1-5
Naphthalene 91-20-3 0.1 - 1
Trimethylbenzene 25551-13-7 0.1 - 1
1,2,4-Trimethylbenzene 95-63-6 0 - 0.1
Other ingredients, determined not to be hazardous according to NOHSC criteria, and not dangerous according to the
ADG Code, make up the product concentration to 100%.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
: 10/15/2008 Page: 1/6
Date of issue
Motorcycle Fuel System Cleaner 2 Stroke
250 ml
4. First-aid measures
: Check for and remove any contact lenses. In case of contact with eyes, rinse
Eye contact
immediately with plenty of water. Get medical attention.
: In case of contact, immediately flush skin copiously with water for at least 15 minutes
Skin contact
while removing contaminated clothing and shoes. Get medical attention.
: If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical
Inhalation
attention.
: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get
Ingestion
medical attention.
: No action shall be taken involving any personal risk or without suitable training. If it is
Protection of first-aiders
suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly
with water before removing it, or wear gloves.
: No specific treatment. Treat symptomatically. Contact poison treatment specialist
Advice to doctor
immediately if large quantities have been ingested or inhaled.
5. Fire-fighting measures
Extinguishing media
: Use dry chemical, CO2, water spray (fog) or foam.
Suitable
: Do not use water jet.
Not suitable
: Move containers from fire area if this can be done without risk. Use water spray to
Special exposure hazards
keep fire-exposed containers cool. This material is toxic to aquatic organisms. Fire
water contaminated with this material must be contained and prevented from being
discharged to any waterway, sewer or drain.
Flammable liquid. The vapour/gas is heavier than air and will spread along the
ground. Vapours may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back. Runoff to sewer may create fire or
explosion hazard.
: Fire-fighters should wear appropriate protective equipment and self-contained
Special protective
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
equipment for fire-fighters
mode.
: Hydrocarbons, oxide of carbon, toxic pyrolysis products.
Hazardous thermal
decomposition products
: Fire-fighters should wear appropriate protective equipment and self-contained
Special protective
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
equipment for fire-fighters
mode.
6. Accidental release measures
: No action shall be taken involving any personal risk or without suitable training.
Personal precautions
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources. No
flares, smoking or flames in hazard area. Do not breathe vapour or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment (see section 8).
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
Environmental precautions
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to
the environment if released in large quantities.
Methods for cleaning up
: Stop leak if without risk. Move containers from spill area. Dilute with water and mop
Small spill
up if water-soluble or absorb with an inert dry material and place in an appropriate
waste disposal container. Use spark-proof tools and explosion-proof equipment.
Dispose of via a licensed waste disposal contractor.
: 10/15/2008 Page: 2/6
Date of issue
Motorcycle Fuel System Cleaner 2 Stroke
250 ml
6. Accidental release measures
: Stop leak if without risk. Move containers from spill area. Approach the release from
Large spill
upwind. Prevent entry into sewers, water courses, basements or confined areas.
Wash spillages into an effluent treatment plant or proceed as follows. Contain and
collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite
or diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Use spark-proof tools and explosion-proof equipment.
Dispose of via a licensed waste disposal contractor. Contaminated absorbent
material may pose the same hazard as the spilt product. Note: see section 1 for
emergency contact information and section 13 for waste disposal.
7. Handling and storage
: Put on appropriate personal protective equipment (see section 8). Eating, drinking
Handling
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Avoid exposure - obtain special instructions before use. Do not get in eyes
or on skin or clothing. Do not breathe vapour or mist. Do not ingest. Avoid release to
the environment. Refer to special instructions/safety data sheet. Use only with
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do
not enter storage areas and confined spaces unless adequately ventilated. Keep in
the original container or an approved alternative made from a compatible material,
kept tightly closed when not in use. Store and use away from heat, sparks, open
flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting
and material handling) equipment. Use non-sparking tools. Take precautionary
measures against electrostatic discharges. To avoid fire or explosion, dissipate static
electricity during transfer by earthing and bonding containers and equipment before
transferring material. Empty containers retain product residue and can be hazardous.
Do not reuse container.
: Store in accordance with local regulations. Store in a segregated and approved area.
Storage
Store in original container protected from direct sunlight in a dry, cool and well-
ventilated area, away from incompatible materials (see section 10) and food and
drink. Eliminate all ignition sources. Separate from oxidizing materials. Keep
container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not store
in unlabelled containers. Use appropriate containment to avoid environmental
contamination.
8. Exposure controls/personal protection
Occupational exposure limits
Ingredient name Exposure limits
Naphtha (petroleum), hydrodesulfurized heavy ACGIH TLV (United States).
TWA: 100 ppm
Solvent naphtha (petroleum), heavy aromatic ACGIH TLV (United States).
TWA: 5 mg/m?8 hour(s).
STEL: 10 mg/m?15 minute(s).
1,2,4-Trimethylbenzene ASCC (Australia, 8/2005).
TWA: 123 mg/m?8 hour(s).
TWA: 25 ppm 8 hour(s).
Naphthalene ASCC (Australia, 8/2005).
STEL: 79 mg/m?15 minute(s).
STEL: 15 ppm 15 minute(s).
TWA: 52 mg/m?8 hour(s).
TWA: 10 ppm 8 hour(s).
: If this product contains ingredients with exposure limits, personal, workplace
Recommended monitoring
atmosphere or biological monitoring may be required to determine the effectiveness
procedures
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment.
Exposure controls
: 10/15/2008 Page: 3/6
Date of issue
Motorcycle Fuel System Cleaner 2 Stroke
250 ml
8. Exposure controls/personal protection
: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation
Engineering measures
or other engineering controls to keep worker exposure to airborne contaminants
below any recommended or statutory limits. The engineering controls also need to
keep gas, vapour or dust concentrations below any lower explosive limits. Use
explosion-proof ventilation equipment.
: Wash hands, forearms and face thoroughly after handling chemical products, before
Hygiene measures
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
: Safety eyewear complying with an approved standard should be used when a risk
Eye protection
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
: Personal protective equipment for the body should be selected based on the task
Skin protection
being performed and the risks involved and should be approved by a specialist before
handling this product.
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
Respiratory protection
standard if a risk assessment indicates this is necessary. Respirator selection must
be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
: Chemical-resistant, impervious gloves complying with an approved standard should
Hand protection
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary.
: Emissions from ventilation or work process equipment should be checked to ensure
Environmental exposure
they comply with the requirements of environmental protection legislation. In some
controls
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
9. Physical and chemical properties
Liquid. [Clear.]
Physical state :
Yellow. [Light]
Colour :
Characteristic.
Odour :
145癈 (293癋)
Boiling point :
0.3 kPa (2.25 mm Hg)
Vapour pressure :
0.796 g/cm 3 [15癈 (59癋)]
Density :
Closed cup: 41癈 (105.8癋) [Pensky-Martens.]
:
Flash point
Lower: 0.6%
Flammable limits :
Upper: 7%
>1 [Air = 1]
Vapour density :
Kinematic (40癈 (104癋)): <0.07 cm 2/s (<7 cSt)
Viscosity :
235癈 (455癋)
:
Auto-ignition temperature
Insoluble in the following materials: cold water and hot water.
Solubility :
10 . Stability and reactivity
: The product is stable.
Stability
: Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld,
Conditions to avoid
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas. Avoid exposure - obtain special
instructions before use. Avoid release to the environment. Refer to special
instructions/safety data sheet. Do not swallow.
: Reactive or incompatible with the following materials: oxidizing materials.
Materials to avoid
: Under normal conditions of storage and use, hazardous decomposition products
Hazardous decomposition
should not be produced.
products
: 10/15/2008 Page: 4/6
Date of issue
Motorcycle Fuel System Cleaner 2 Stroke
250 ml
11 . Toxicological information
Potential acute health effects
: May cause lung irritation.
Inhalation
: Aspiration hazard if swallowed. Can enter lungs and cause damage.
Ingestion
: May cause skin irritation. May cause dermatitis.
Skin contact
: May cause eye irritation.
Eye contact
Acute toxicity
Product/ingredient name Dose Species Result Exposure
Solvent naphtha (petroleum), heavy Rabbit >2 mL/kg LD50 Dermal -
aromatic
Rat >590 mg/m? LC50 Inhalation 4 hours
Vapour
1,2,4-Trimethylbenzene Rat 5 g/kg LD50 Oral -
Naphthalene Rabbit >20 g/kg LD50 Dermal -
Rat >2500 mg/kg LD50 Dermal -
Rat >490 mg/kg LD50 Oral -
Potential chronic health effects
: May cause target organ damage, based on animal data.
Chronic effects
: May cause cancer. Risk of cancer depends on duration and level of exposure.
Carcinogenicity
: No known significant effects or critical hazards.
Mutagenicity
: No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
: No known significant effects or critical hazards.
Fertility effects
Over-exposure signs/symptoms
: No specific data.
Inhalation
: Adverse symptoms may include the following:
Ingestion
nausea or vomiting
: No specific data.
Skin
: No specific data.
Eyes
: May cause damage to the following organs: blood, kidneys, liver, central nervous
Target organs
system (CNS).
12 . Ecological information
: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
Environmental effects
environment.
Aquatic ecotoxicity
Product/ingredient name Species Exposure Result
1,2,4-Trimethylbenzene Crustaceans 48 hours Acute LC50 17000 ug/L
Fish 96 hours Acute LC50 7720 to 8280 ug/L
Naphthalene Daphnia 48 hours Acute EC50 1.96 mg/L
Fish 96 hours Acute LC50 2.25 mg/L
Daphnia 48 hours Acute LC50 17.4 mg/L
Fish 96 hours Acute LC50 2.1 ppm
Crustaceans 48 hours Acute LC50 2.6 to 2.89 ppm
: No known significant effects or critical hazards.
Other adverse effects
13 . Disposal considerations
: The generation of waste should be avoided or minimised wherever possible. Empty
Methods of disposal
containers or liners may retain some product residues. This material and its container
must be disposed of in a safe way. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Disposal of this product, solutions and any
by-products should at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional local authority
requirements. Avoid dispersal of spilt material and runoff and contact with soil,
waterways, drains and sewers.
: 10/15/2008 Page: 5/6
Date of issue
Motorcycle Fuel System Cleaner 2 Stroke
250 ml
14 . Transport information
International transport regulations
Classes PG* Label
Regulatory UN Proper shipping name Additional information
information number
UN3295 HYDROCARBONS, LIQUIDS, 3 III
ADG Limited quantity
N.O.S. (Naphtha (petroleum), LQ7
hydrodesulfurized heavy) 3
HYDROCARBONS, LIQUIDS, 3 III
UN3295 -
ADR
N.O.S. (Naphtha (petroleum),
hydrodesulfurized heavy) 3
UN3295 HYDROCARBONS, LIQUIDS, 3 III
IMDG Emergency schedules
N.O.S. (Naphtha (petroleum), (EmS)
hydrodesulfurized heavy). F-E, S-E
3
Marine pollutant
Marine pollutant
UN3295 HYDROCARBONS, LIQUIDS, 3 III -
IATA
N.O.S. (Naphtha (petroleum),
hydrodesulfurized heavy) 3
PG* : Packing group
15 . Regulatory information
Standard for the Uniform Scheduling of Drugs and Poisons
6
Control of Scheduled Carcinogenic Substances
Ingredient name Schedule
No listed substance
: All components are listed or exempted.
Australia inventory (AICS)
16 . Other information
: Chemical Check GmbH
2
Person who prepared the
MSDS
History
: 10/15/2008
Date of issue
:1
Version
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the
user. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.
: 10/15/2008 Page: 6/6
Date of issue
|