Material Safety Data Sheet
Revision Issued: 11/24/2008 Supercedes: 10/01/2004 First Issued: 3/27/87
Section I - Chemical Product And Company Identification
Product Name: Desert Brand Classic Sealer, Clear
CAS Number: N/A HBCC MSDS No. CD03001
1675 No. Main Street, Orange, California 92867
Telephone No: 714-998-8800 | Chemtrec: 800-424-9300
Section II - Composition/Information On Ingredients
Exposure Limits (TWAs) in Air
Chemical Name CAS Number ACGIH TLV OSHA PEL STEL
U U U U U
Hydrocarbon Solvent 64742-94-5 100 ppm 100 ppm 150 ppm
Methyl-Butyl Methacrylate 28262-63-7 100 ppm 200 ppm N/A
Hydrocarbon Solvent 1330-20-7 100 ppm 100 ppm 150 ppm
Section III - Hazard Identification
Routes of Exposure: Desert Brand Classic Sealer, Clear can affect the body if it is
inhaled, ingested, or comes in contact with the eyes and skin.
Summary of Acute Health Hazards
Ingestion: May cause irritation of esophagus and stomach.
Inhalation: May cause irritation of nose and throat.
Skin: May cause a rash.
Eyes: Can cause irritation of the eye.
Carcinogenicity Lists: No NTP: No IARC Monograph: No OSHA Regulated: Yes
Signs and Symptoms of Exposure: Contact with skin or eyes may cause irritation.
Breathing of the vapor may irritate the nose and throat.
Effects of Overexposure: May cause anesthesia, headache, nausea, or dizziness.
Medical Conditions Generally Aggravated by Exposure: N/A
Notes To Physician: Aspirated acetone may cause severe lung damage and present
a significant hazard. Stomach contents should be evacuated quickly in a manner
which avoids aspiration. Otherwise, treatment of overexposure is directed at the
control of symptoms and the clinical condition of the patient. No specific antidote is
known.
Section IV - First Aid Measures
Ingestion: Do notU induce vomiting unless advised to do so by a physician. GET
U
MEDICAL ATTENTION.
Inhalation: Remove victim to fresh air and administer artificial respiration if
Product Name: Desert Brand Classic Sealer, Clear 1
required. GET MEDICAL ATTENTION, if needed.
Skin: Flush skin with plenty of water. If rash develops, get medical attention.
Eyes: Immediately flush with plenty of water for at least 15 minutes. GET MEDICAL
ATTENTION, if discomfort persists.
Section V - Fire Fighting Measures
Flash Point: 0癋; - TCC Autoignition Temperature: 450篊, 842篎
Lower Explosive Limit: 1.9% by Upper Explosive Limit: 12.3% by volume
volume in air in air
Unusual Fire and Explosion Hazards: Handle as an extremely flammable
material. Vapors may form an explosive mixture with air between the upper and
lower explosive limits.
Extinguishing Media: Use foam, carbon dioxide or dry chemical. Use of water may
cause fire to spread due to components that float on water. Acetone/water solutions
have flash points when the acetone concentration is greater than 8% (by weight).
The fire point, which is the percent by weight when a solution sustains a flame, is
higher than that.
Special Firefighting Procedures: Wear a self-contained breathing apparatus
(pressure-demand, MSHA/NIOSH-approved or equivalent) and full protective gear.
Section VI - Accidental Release Measures
Eliminate all sources of ignition. Provide adequate ventilation. Flush with water to a
tank or an open well-ventilated area. Absorb or remove to a container and dispose of
properly in conformance with local regulations.
Section VII - Handling and Storage
CAUTION: EXTREMELY FLAMMABLE! Keep away from heat, sparks, and open flame.
Keep container closed. Use with adequate ventilation.
Section VIII - Exposure Controls/Personal Protection
Respiratory Protection: Organic vapor or air-supplied mask if the TLV is exceeded.
Only MSHA or NIOSH approved respirators should be used.
Ventilation: Local is preferable, but mechanical is acceptable.
Protective Clothing: Protective gloves are advisable, and safety goggles or a face
shield should be used.
Other Protective Clothing or Equipment: An eye wash and a safety shower
should be available.
Work/Hygienic Practices: Employees who handle Desert Brand Classic Sealer,
Clear should wash their hands thoroughly before eating, drinking, smoking, or using
toilet facilities. Do NOT place food, coffee or other drinks in the area where dusting
or splashing of solutions is possible.
Section IX - Physical and Chemical Properties
Physical State: Liquid pH: N/A
Melting Point/Range: 0癋 Boiling Point/Range: 275-415癋
Appearance/Color/Odor: Liquid/Cloudy/Hydrocarbon
Solubility in Water: Negligible Vapor Pressure (mmHg): N/EST
Specific Gravity (Water=1): 0.88-
Molecular Weight: N/A
0.91
Product Name: Desert Brand Classic Sealer, Clear 2
Vapor Density (Air=1): 4.7 % Volatiles: 75-76 by volume
VOCs: < 450 grams/liter (3.75
How to detect this compound : N/A
Lbs./gallon)
Evaporation Rate (BuAc=1): 0.7-10
Section X - Stability and Reactivity
Stability: Stable Hazardous Polymerization: Will not occur
Conditions to Avoid: Heat or Flames
Materials to Avoid: Strong alkalis or strong oxidizers. This sealer may dissolve
some plastics, rubber materials or coating.
Hazardous Decomposition Products: From thermal decomposition, oxides of
carbon and acrylic monomer vapors.
Section XI - Toxicological Information
N/A
Section XII - Ecological Information
N/A
Section XIII - Disposal Considerations
Dispose of in accordance with applicable local, county, state and federal regulations.
Section XIV - Transport Information
DOT Proper Shipping Name: Paint
DOT Hazard Class/ I.D. No.: 3, UN1263, II
Section XV - Regulatory Information
WARNING
This product contains chemicals known to the State of California to cause
cancer.
Reportable Quantity: N/A
NFPA Rating: Health - 2; Flammability - 3; Instability - 0
0=Insignificant 1=Slight 2=Moderate 3=High 4=Extreme
Carcinogenicity Lists: No NTP: No IARC Monograph: No OSHA Regulated: No
Section 313 Supplier Notification: This product contains the following toxic
chemical(s) subject to the reporting requirements of SARA TITLE III Section 313 of
the Emergency Planning and Community Right-To Know Act of 1986 and of 40 CFR
372:
CAS # Chemical Name % By Weight
U U U
95-63-6 Pseudocumene < 0.3
100-41-4 Ethyl Benzene < 1.0
1330-20-7 Xylene 8.97
Section XVI - Other Information
Synonyms/Common Names: Sealer
Chemical Family/Type: Paint
Sections changed since last revision: VIII, XIV, XV
IMPORTANT! Read this MSDS before use or disposal of this product. Pass along the
U
information to employees and any other persons who could be exposed to the
Product Name: Desert Brand Classic Sealer, Clear 3
product to be sure that they are aware of the information before use or other
exposure.U This MSDS has been prepared according to the OSHA Hazard
Communication Standard [29 CFR 1910.1200]. The MSDS information is based on
sources believed to be reliable. However, since data, safety standards, and
government regulations are subject to change and the conditions of handling and
use, or misuse are beyond our control, Hill Brothers Chemical CompanyU makes no
HU H
warranty, either expressed or implied, with respect to the completeness or
continuing accuracy of the information contained herein and disclaims all liability for
reliance thereon. Also, additional information may be necessary or helpful for specific
conditions and circumstances of use. It is the user's responsibility to determine the
suitability of this product and to evaluate risks prior to use, and then to exercise
appropriate precautions for protection of employees and others.
Product Name: Desert Brand Classic Sealer, Clear 4
|