POWER SERVICE PRODUCTS, INC.
MATERIAL SAFETY DATA SHEET
SECTION 1 - CHEMICAL COMPANY AND PRODUCT IDENTIFICATION
PRODUCT NAME: DIESEL FUEL SUPPLEMENT +CETANE BOOST
Unless otherwise noted, all sections of this MSDS apply to each of the following products and
part numbers.
PART NUMBERS:
1016-06, 1025-06, 1025-12, 1041-04, 1080-06,
1:400 Treatment Ratio
11016-06, 11025-06, 11025-12, 11041-04,
11080-06
1000, 1060-01
1:1,000 Treatment Ratio
1050-02, 1055-01, 1260-01
1:1,500 Treatment Ratio
COMPANY IDENTIFICATION:
Power Service Products, Inc.
P.O. Box 1089
Weatherford, TX 76086
Email: psp@powerservice.com
Phone: 800/643-9089 or 817-599-9486
Fax: 817-599-4893
Emergency Phone Number: Within USA 1-800-424-9300. Outside USA 001-703-527-3887
(Call Collect).
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
Specific chemical information is being withheld as a Trade Secret. Specific chemical
information will be made available to health professionals in accordance with 29 CFR
1910.1200.
INGREDIENTS
Petroleum Distillates
Aromatic Hydrocarbons
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 1 of 10
SECTION 3 - HAZARDS IDENTIFICATION
POTENTIAL HEALTH EFFECTS:
EYES: May cause eye irritation. Effects may include discomfort or pain and redness.
SKIN: May be harmful if absorbed through the skin. May cause skin irritation.
Prolonged or repeated skin contact may cause drying or defatting of the skin. Symptoms
may include pain, itching, discoloration, swelling, and blistering.
INHALATION: Do not breathe vapors. Harmful or fatal if inhaled. Breathing of high
vapor concentrations may cause dizziness, light-headedness, headache, nausea and
loss of coordination. Continued inhalation may result in unconsciousness. The vapor or
fumes from this material may cause respiratory irritation and damage auditory system.
Breathing this material at elevated concentrations causes central nervous system
effects. Central nervous system effects may include headache, dizziness, nausea,
vomiting, weakness, loss of coordination, blurred vision, drowsiness, confusion or
disorientation. At extreme exposures, central nervous system effects may include
respiratory depression, tremors, or convulsions, loss of consciousness, coma or death.
INGESTION: Do not take internally. Harmful or fatal if swallowed. If swallowed, may be
aspirated and cause lung damage. This material can directly enter the lungs, if
swallowed, or if subsequently vomited. Once in the lungs it is very difficult to remove
and can cause severe injury or death.
TARGET ORGANS:
Central nervous system, auditory system, respiratory system, blood, eyes, heart, kidneys, liver,
skin, gastrointestinal tract.
SECTION 4 - FIRST AID MEASURES
As a precaution, exposure to liquids, vapors, mists and fumes should be minimized.
EYE CONTACT:
Hold eyelids apart and flush eyes with large amounts of water for at least 15 minutes. Remove
contact lenses, if present, after first 5 minutes of rinsing. If irritation persists, call a physician.
SKIN CONTACT:
Wash contact area with soap and water. Discard contaminated clothing and shoes or thoroughly
clean before reuse. If irritation persists, call a physician.
INHALATION:
If overcome by vapors, move the exposed person to fresh air. If breathing is labored, administer
oxygen. If breathing has stopped, apply artificial respiration. Seek medical attention if breathing
difficulties continue.
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 2 of 10
INGESTION:
If swallowed, do NOT induce vomiting. If vomiting occurs, have person lean forward. Keep at
rest. Give the person a glass of water or milk to drink and get immediate medical attention.
Never give anything by mouth to an unconscious person.
SECTION 5 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABLE PROPERTIES:
FLASH POINT:
Treatment Ratio Part Numbers: Flash Point:
1016-06, 1025-06, 1025-12, 1041-04,
1:400 Treatment Ratio 105癋 (40.6癈)
1080-06, 11016-06, 11025-06, 11025-
12, 11041-04, 11080-06
1000, 1060-01
1:1,000 Treatment Ratio 130癋 (54.4癈)
1050-02, 1055-01, 1260-01
1:1,500 Treatment Ratio 142癋 (61.1癈)
FLAMMABLE LIMITS: lower: Not Determined upper: Not Determined
AUTOIGNITION TEMPERATURE: Not Determined
EXTINGUISHING MEDIA:
Use water fog, foam dry chemical or carbon dioxide (CO2) to extinguish flames.
FIRE FIGHTING:
FIRE FIGHTING INSTRUCTIONS: Use standard protective equipment including self-
contained breathing apparatus (SCBA).
UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors are heavier than air and may
travel along the ground to a distant ignition source and flash back. See Section 10 for
Stability and Reactivity.
NOTE: EMPTY CONTAINERS CONTAIN COMBUSTIBLE VAPORS. DO NOT USE CUTTING
TORCH EQUIPMENT OR ANY OTHER FLAME OR OTHER SOURCES OF IGNITION ON
ANY EMPTY CONTAINER.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
PROTECTIVE MEASURES:
Avoid contact with spilled material. Warn or evacuate occupants in surrounding and downwind
areas. Eliminate all sources of ignition in the vicinity of the spill or released vapor. See Section 3
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 3 of 10
for Hazards Identification. See Section 4 for First Aid Measures. See Section 5 for Fire Fighting
Information. See Section 8 for Personal Protective Equipment.
SPILL MANAGEMENT:
Eliminate potential sources of ignition. Stop leak if it can be done without risk. Dike and contain
spill. Do not touch or walk through spilled material. Prevent entry into waterways, sewer,
basements or confined areas. Remove with vacuum trucks or pump to storage/salvage vessels.
Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of
properly. A vapor suppressing foam may be used to reduce vapors. Local, state and federal
laws and/or regulations may apply to releases and disposal of this material, as well as those
materials and items employed in the clean-up releases. The user/responder will need to
determine which local, state and federal laws and/or regulations are applicable. The National
Response Center can be reached at 1-800-424-8802.
SECTION 7 - HANDLING AND STORAGE
HANDLING: Avoid contact with eyes and skin. Use only with adequate ventilation. Use proper
bonding and/or grounding procedures. Prevent small spills and leakage to avoid slip hazard.
Material can accumulate static charges which may cause an electrical spark (ignition source).
Keep away from ignition sources such as heat, sparks and open flame. No smoking.
STORING: DO NOT USE OR STORE near heat, sparks or open flames. USE AND STORE
ONLY IN A WELL VENTILATED AREA. Handle containers with care. Keep container closed
when not in use.
STORAGE TEMPERATURE:
Storage
Treatment Ratio Part Numbers:
Temperature:
1016-06, 1025-06, 1025-12, 1041-04,
1:400 Treatment Ratio -20癋 to 104癋
(-28.8癈 to 40癈)
1080-06, 11016-06, 11025-06, 11025-12,
11041-04, 11080-06
1000, 1060-01
1:1,000 Treatment Ratio 0癋 to 104癋
(-17.8癈 to 40癈)
1050-02, 1055-01, 1260-01
1:1,500 Treatment Ratio 10癋 to 104癋
(-12.2癈 to 40癈)
NOTE: CONTAINERS ARE STRICTLY SINGLE TRIP CONTAINERS. THEY ARE NOT TO BE
USED FOR ANY REASON AFTER BEING EMPTIED. EMPTY CONTAINERS CONTAIN
COMBUSTIBLE VAPORS. DO NOT USE CUTTING TORCH EQUIPMENT OR ANY OTHER
FLAME OR OTHER SOURCES OF IGNITION ON ANY EMPTY CONTAINER.
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 4 of 10
SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION
EXPOSURE GUIDELINES:
OSHA ACGIH NIOSH
CAS # PEL TLV STEL REL STEL IDLH Note
vinyl acetate 108-05-4 not est. 10 ppm 15 ppm not est. 4 ppm not est. n/a
ethylbenzene 100-41-4 100 ppm 100 ppm 125 ppm 100 ppm 125 ppm 800 ppm n/a
naphthalene 91-20-3 10 ppm 10 ppm 15 ppm 10 ppm 15 ppm 250 ppm skin
xylene 1330-20-7 100 ppm 100 ppm 150 ppm 100 ppm 150 ppm 900 ppm n/a
1,2,4-
95-63-6 not est. 25 ppm not est. 25 ppm not est. not est. n/a
trimethylbenzene
petroleum distillates n/a 500 ppm not est. not est. 86 ppm 444 ppm 1100 ppm n/a
ENGINEERING CONTROLS: The level of protection and types of controls necessary will vary
depending upon potential exposure conditions. Local exhaust ventilation is recommended to
control exposure.
PERSONAL PROTECTIVE EQUIPMENT (PPE):
Eyes and Face: Eye protection such as safety glasses or chemical goggles is
recommended if contact is likely.
Skin: If prolonged or repeated skin contact is likely, chemical/oil resistant clothing and
gloves are recommended. Wear additional protective clothing as appropriate.
Respiratory: Wear a NIOSH/MSHA approved respirator as necessary.
Specific Hygiene Measures: Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking.
Routinely wash work clothing and protective equipment to remove contaminants.
Practice good housekeeping.
NOTE: These precautions are for room temperature handling. If used at elevated temperatures
or aerosol/spray application added precautions may be necessary.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
1:400 Treatment Ratio 1:1,000 Treatment Ratio 1:1,500 Treatment Ratio
PHYSICAL FORM Liquid Liquid Liquid
COLOR Brown Brown Brown
ODOR Aromatic Solvent Aromatic Solvent Aromatic Solvent
POUR POINT -35癋 (-37.2癈) -20 (-28.9癈) -10 (-23.3癈)
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 5 of 10
BOILING POINT 300癋 (148.9癈) 300癋 (148.9癈) 300癋 (148.9癈)
VAPOR PRESSURE (psi) 0.2 ?0.95 0.2 ?0.95 0.2 ?0.95
VAPOR DENSITY (AIR = 1) >5.0 >5.0 >5.0
pH 7 ?8 (slightly basic) 7 ?8 (slightly basic) 7 ?8 (slightly basic)
0.925 0.930 0.930
SPECIFIC GRAVITY (at 60癋)
SECTION 10 - STABILITY AND REACTIVITY
CHEMICAL STABILITY:
This material is considered stable under normal ambient and anticipated storage and handling
conditions of temperature and pressure.
CONDITIONS TO AVOID:
Open flames, high energy ignition sources, and elevated temperatures.
MATERIALS TO AVOID:
May react with oxygen, strong acids, strong oxidizing agents, such as; chlorates, nitrates,
peroxides, alkalis, etc., nitriles, and chromic anyhydride.
HAZARDOUS DECOMPOSITION:
Carbon oxides, products of incomplete combustion.
HAZARDOUS POLYMERIZATION:
Hazardous polymerization will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
This product contains the following chemicals classified as carcinogens as indicated:
Chemical Listed By Part Numbers
vinyl acetate IARC 1050-02,1055-01, 1260-01
ethylbenzene IARC ALL
napthalene IARC, NTP ALL
SECTION 12 - ECOLOGICAL INFORMATION
ECOTOXICITY:
This material is expected to be toxic to aquatic organisms.
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 6 of 10
SECTION 13 - DISPOSAL CONSIDERATIONS
RCRA Hazard Class (40CFR 261):
This product, if discarded, may become a hazardous waste under CERCLA. Use the following
information:
Proper Shipping Name: RQ Waste Flammable Liquid, N.O.S., (Petroleum Hydrocarbons)
Class: 3
I.D. Number: UN 1993
Packing Group: III
RCRA WASTE Number: D001
State or local laws may impose additional regulatory requirements regarding disposal.
EMPTY CONTAINER WARNING: Empty containers may contain residue and can be
dangerous. See Section 5 for Fire and Explosion Hazard Data.
SECTION 14 - TRANSPORTATION INFORMATION
The following part numbers are Consumer Commodities and are not regulated by DOT:
1016-06, 1025-06, 1025-12, 1041-04, 1080-06,
1:400 Treatment Ratio
11016-06, 11025-06, 11025-12, 11041-04,
11080-06
1050-02, 1055-01
1:1,500 Treatment Ratio
The following part numbers are regulated by DOT:
1000, 1060-01
1:1,000 Treatment Ratio
1260-01
1:1,500 Treatment Ratio
PROPER SHIPPING NAME: Combustible Liquid, N.O.S., (Petroleum Hydrocarbons)
HAZARD CLASS: Combustible Liquid
I.D. NUMBER: NA1993
PACKING GROUP: III
PLACARDING: Combustible Liquid
SECTION 15 - REGULATORY INFORMATION
?4(a) Consumer Product Safety Act General Certificate of Conformity
Power Service Products, Inc. certifies that this product meets the statutory and regulatory
requirements of the US Consumer Products Safety Act, the Federal Hazardous Substances Act,
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 7 of 10
and the Poison Prevention Packaging Act of 1970, as applicable. The Power Service products
are manufactured in the United States in Weatherford, Texas, unless otherwise indicated on the
product label. The product manufacture date is stamped on the product container. This
Certificate is based upon a reasonable testing program conducted by Power Service Products,
Inc. which includes a quality control program incorporating confirmation of compliance by
packaging and closure manufactures. Third-party testing is not required to certify compliance.
Further details are available from the Power Service Products Compliance Coordinator at 1-
800-643-9089.
Contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR
1910.1200
TSCA STATUS:
All chemical substances found in this product comply with the Toxic Substances Control Act
inventory reporting requirements.
EPA SARA TITLE III CHEMICAL LISTINGS:
Section 302 Extremely Hazardous Substances: None
Sections 311/ 312 Hazard Class:
Acute Health Effects: Yes Sudden Release of Pressure Hazard: No
Chronic Health Effects: Yes Reactivity Hazard: No
Fire Hazard: Yes
NFPA (NATIONAL FIRE PROTECTION ASSOCIATION) RATING:
HEALTH: 2
FIRE: 2
REACTIVITY: 0
Section 313:
This product contains the following chemicals that are subject to the reporting
requirements of EPCRA Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 (40 CFR Part 372).
Treatment Ratio CAS Number Chemical Name Max %
1:400 Treatment Ratio 100-41-4 ethylbenzene 9.0
1330-20-7 xylene, mixed isomers 4.5
91-20-3 naphthalene 1.0
95-63-6 1,2,4 trimethylbenzene 25.0
1:1000 Treatment Ratio 108-05-4 vinyl acetate 0.5
100-41-4 ethylbenzene 6.5
1330-20-7 xylene, mixed isomers 4.0
91-20-3 naphthalene 1.0
95-63-6 1,2,4 trimethylbenzene 15.0
1:1,500 Treatment Ratio 108-05-4 vinyl acetate 0.5
100-41-4 ethylbenzene 5.0
1330-20-7 xylene, mixed isomers 3.5
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 8 of 10
91-20-3 naphthalene 1.0
95-63-6 1,2,4 trimethylbenzene 6.5
The following components of this material are found on these state regulatory lists.
1, 2, 4 trimethylbenzene: IL RTK, MN Hazardous substance, NJ RTK, PA RTK, RI RTK
Vinyl acetate: NDEP HAP, NJ RTK, MN Hazardous substance
Ethylbenzene: NDEP HAP, California Prop. 65, MA RTK, NJ RTK, PA RTK, RI RTK,
MN Hazardous substance
Xylene: NDEP HAP, MA RTK, NJ RTK, PA RTK, RI RTK, MN Hazardous substance
Napthalene: California Prop. 65, MA RTK, NJ RTK, PA RTK, MN Hazardous substance
This product contains a chemical known to the state of California to cause cancer.
SECTION 16 ?OTHER INFORMATION
The information contained herein is offered in good faith and is believed to be accurate based
on the data available to us as of the date of MSDS preparation. The information in this
document applies to this specific product as supplied. It may not be appropriate for this product
if the product is used in combination with other materials. The information in this document is
not intended to constitute product performance information. Some of the information presented
and conclusions drawn herein are from sources other than direct test data on the product. No
statement shall be construed as an endorsement of any product or process. The recommended
industrial hygiene and safe handling procedures are believed to be valid in the context of the
intended use as described in product labeling. However, each user should review these
recommendations in the specific context of the intended use and determine whether they are
appropriate. You are urged to obtain material safety data sheets for all products you buy,
process, use or distribute, and are encouraged to advise those who may come in contact with
such products of the information contained therein. Regulatory requirements are subject to
change and may differ between locations. It is the buyer's/user's responsibility to ensure that his
activities comply with all federal, state, provincial or local laws. No warranty or guarantee is
expressed or implied with respect to this product, the accuracy and sufficiency of the data or
recommendations herein, or the results to be obtained from the use of this product. IN NO
EVENT SHALL POWER SERVICE PRODUCTS, INC. BE LIABLE FOR ANY LOSS, CLAIM,
DAMAGE OR LIABILITY OF ANY KIND, WHICH MAY ARISE FROM OR IN CONNECTION
WITH THE INFORMATION CONTAINED IN THIS DOCUMENT OR FROM THE USE,
HANDLING OR STORAGE OF THE PRODUCT BY THE BUYER/USER, WHETHER DIRECT,
INDIRECT, OR CONSEQUENTIAL, OR FOR ANY CLAIM BY ANY THIRD PARTY, BEYOND
THE PURCHASE PRICE OR REPLACEMENT OF THE PRODUCT IN CONNECTION WITH
WHICH SUCH LOSS, CLAIM, DAMAGE OR LIABILITY AROSE.
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 9 of 10
THE FOREGOING LIMITATIONS APPLY REGARDLESS OF THE CAUSES OR
CIRCUMSTANCES GIVING RISE TO SUCH LOSS, CLAIM, DAMAGE OR LIABILITY, EVEN IF
SUCH LOSS, CLAIM, DAMAGE, OR LIABILITY IS BASED ON NEGLIGENCE OR OTHER
TORTS OR BREACH OF CONTRACT.
Revised: December 16, 2009
Supersedes: October 13, 2009
POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST
Page 10 of 10
|