Material Safety Data Sheet
Date Originated: 2007-03-29
Page: 1
HCS Risk Phrases
NFPA Protective Clothing
HCS CLASS: Very toxic.
3
HCS CLASS: Irritating substance.
3 0 HCS CLASS: Sensitizing substance.
HCS CLASS: Target organ effects.
HCS CLASS: Flammable liquid having a flash point lower than
37.8?(100?br>
C F).
Section 1. Chemical Product and Company Identification
Product Name Synonym
3817.10
Coroguard MCU Aliphatic Clear
Manufacturer Chemical Family
INSL-X PRODUCTS Not applicable. (Paint)
308, Old Country road
Edgewater
FL 32132 USA
Tel: 1-386-428-6461
In case of Emergency
EMERGENCY PHONE NUMBERS:
USA and Canada: 1-800 424-9300
Section 2. Composition and Information on Ingredients
Name CAS # % by TLV/PEL LC50/LD50
Weight
Isophorone diisocyanate prepolymer Proprietary 30-60 Not available. Not available.
Homopolymer of HDI 28182-81-2 10-30 Not available. ORAL (LD50): Acute: 10000
mg/kg [Rat]. DERMAL
(LD50): Acute: 5000 mg/kg
[Rabbit].
Xylenes 1330-20-7 10-30 TWA: 100 STEL: 150 (ppm) DERMAL (LD50): Acute:
from OSHA (PEL) 2000 mg/kg [Rabbit].
VAPOR (LC50): Acute: 6700
ppm 4 hour(s) [Rat].
Isophorone diisocyanate homopolymer 53880-05-0 5-10 Not available. Not available.
Methyl n-amyl ketone 110-43-0 5-10 TWA: 50 (ppm) from ACGIH DERMAL (LD50): Acute:
(TLV) 12600 mg/kg [Rabbit].
TWA: 100 (ppm) from VAPOR (LC50): Acute: 3000
OSHA (PEL) ppm 4 hour(s) [Rat].
Light aromatic solvent naphtha 64742-95-6 3-7 TWA: 50 (ppm) from ACGIH DERMAL (LD50): Acute:
(petroleum) (TLV) 4000 mg/kg [Rabbit].
VAPOR (LC50): Acute:
10200 ppm 4 hour(s) [Rat].
Methyl isobutyl ketone 108-10-1 1-5 TWA: 50 STEL: 75 (ppm) ORAL (LD50): Acute: 2080
from ACGIH (TLV) mg/kg [Rat]. 2850 mg/kg
TWA: 50 STEL: 75 (ppm) [Mouse]. VAPOR (LC50):
from OSHA (PEL) Acute: 2000 ppm 4 hour(s)
[Rat].
Isophorone Diisocyanate (IPDI) 4098-71-9 0-4 TWA: 0.005 STEL: 0.02 DERMAL (LD50): Acute:
(ppm) from OSHA (PEL) 1000 mg/kg [Rat]. VAPOR
SKIN (LC50): Acute: 13.5 ppm 4
TWA: 0.005 STEL: 0.02 hour(s) [Rat].
(ppm) from ACGIH (TLV)
SKIN
TWA: 0.045 (mg/m3) from
ACGIH SKIN
1,2,4-Trimethylbenzene 95-63-6 0-4 TWA: 25 CEIL: 35 (ppm) Not available.
TWA: 125 CEIL: 170 (mg/m3
)
Material Safety Data Sheet
Coroguard MCU Aliphatic Clear
Product Name:
Page: 2
Section 3. Hazards Identification
Inhalation. Skin contact (absorption). Eye contact. Ingestion.
Routes of Entry:
Potential Acute Health Effects
Eyes: Liquid or spray mist may irritate eyes. Over-exposure may cause severe irritation. Inflammation of the
eye is characterized by redness, watering, and itching.
Skin: This product may irritate skin upon contact. Harmful if absorbed through the skin. May cause skin
sensitization. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally,
blistering.
Ingestion: Dangerous in case of ingestion. Irritation or chemical burns of the mouth, pharynx, esophagus and
stomach can develop following ingestion of this product. May cause headaches, weakness, nausea,
vomiting and diarrhea. Even small amounts of liquid aspirated into lungs during ingestion or from
vomiting may cause mild to severe pulmonary injury and possibly death.
Inhalation: Harmful if inhaled (irritant, sensitizer). Over-exposure by inhalation of the vapors/spray mist may produce
severe irritation of respiratory tract, characterized by coughing, choking, or shortness of breath. May
cause nausea, headaches and dizziness. May cause lung sensitization by inhalation. Massive exposure
can cause unconciousness or death.
Potential Chronic Health
Effects
Eyes: Repeated or prolonged contact with spray mist may produce chronic eye irritation.
Skin: Repeated skin exposure can produce local skin destruction, or dermatitis, possibly sensitization.
Ingestion: May be fatal if swallowed.
Inhalation: Repeated or prolonged inhalation of vapors/spray mist may lead to chronic respiratory irritation. May
cause sensitization by inhalation.
Sensitive individuals may develop eczema and/or asthma on inhalation of this material. However, in light
Other chronic effects on
Humans of good industrial hygiene, exposure to any chemical should be kept to a minimum.
Section 4. First Aid Measures
Check for and remove any contact lenses. IMMEDIATELY flush eyes with running water for at least 15 minutes,
Eye Contact
keeping eyelids open. DO NOT use an eye ointment. Seek medical attention.
Wash gently and thoroughly the contaminated skin with running water and non-abrasive soap. Rinse with plenty
Skin Contact
of running water (15-30 minutes). If irritation persists, seek medical attention.
If the product gets onto the clothed portion of the body, remove the contaminated clothes as quickly as possible,
Hazardous Skin Contact
protecting your own hands and body. Place the person under shower. Wash gently and thoroughly the
contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices,
creases and groin. Rinse with plenty of running water (15-30 minutes). Seek medical attention. Wash
contaminated clothing before reusing.
Allow the person to rest in a well ventilated area. Loosen tight clothing around the person's neck and waist. If
Inhalation
symptoms persist, seek medical advice immediately (show the label when possible).
Evacuate the person to a safe area as soon as possible. Loosen tight clothing around the person's neck and
Hazardous Inhalation
waist. If the person is not breathing, administer mouth-to-mouth resuscitation. Warning: It may be dangerous to
the person providing aid to give mouth-to-mouth resuscitation if the inhaled material is toxic, infectious or
corrosive. Oxygen may be administered if breathing is difficult. Seek medical attention.
DO NOT induce vomiting. Have conscious person drink several glasses of water or milk. Seek immediate
Ingestion
medical attention.
DO NOT induce vomiting. Have conscious person drink several glasses of water or milk. Never give an
Hazardous Ingestion
unconscious person anything to ingest. Even small amounts of liquid aspirated into lungs during ingestion or
from vomiting may cause mild to severe pulmonary injury and possibly death. If breathing is difficult, administer
oxygen. If the person is not breathing, administer mouth-to-mouth resuscitation. WARNING: It may be
dangerous to the person providing aid to give mouth-to-mouth resuscitation when the material is toxic, infectious
or corrosive. Avoid mouth-to-mouth contact by using mouth guards or shields. Seek immediate medical
attention.
Material Safety Data Sheet
Coroguard MCU Aliphatic Clear
Product Name:
Page: 3
Section 5. Fire and Explosion Data
Flammable.
Flammability of the Product
The lowest known value is 393?(739.4?(Methyl n -amyl ketone).
C F)
Auto-Ignition Temperature
The lowest known value is CLOSED CUP: 16?(60.8?. (Tagliabue.). OPEN CUP: 26?(78.8?(Tagliabu e).
C F) C F).
Flash Points
(Methyl isobutyl ketone)
The greatest known range is LOWER: 1% UPPER: 13.1% (Isophorone Diisocyanate (IPDI))
Flammable Limits
Carbon oxides (CO, CO2), and other toxic compounds (nitrogen oxides, isocyanate vapors and traces of
Products of Combustion
hydrogen cyanide).
Flammable in presence of open flames and sparks.
Fire Hazards in Presence of
Various Substances
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Yes.
of Various Substances
Flammable liquid, insoluble in water.
Fire Fighting Media
SMALL FIRE: Use DRY chemicals, CO2, soda ash or lime.
and Instructions
LARGE FIRE: Use water spray or fog. Never direct a water jet in the container in order to prevent any splashing
of the product which could cause spreading of the fire. Cool the containers with water spray or fog in order to
prevent pressure build-up, autoignition or explosion. Firefighters should be equipped with self-contained
breathing apparatus to protect against toxic and irritating fumes. During a fire, isocyanate vapors and other
irritating, highly toxic gases may be generated by thermal decomposition or combustion.
Vapor may travel considerable distance to source of ignition and flash back. When heated to decomposition it
Special Remarks on
emits highly toxic fumes.
Fire Hazards
Special Remarks on Explosion Container explosion may occur under fire conditions or when heated (due to pressure build-up). Vapor forms
explosive mixture with air between upper and lower flammable limits.
Hazards
Flammability
3
3 0
Health Reactivity
Special Hazard
Section 6. Accidental Release Measures
Absorb with an inert material and place in an appropriate waste disposal container. Treat with a neutralizing
Small Spill
solution (5% ammonia water, or 5-10 % sodium carbonate in water). Wear suitable protective clothing and
respirator.
Poisonous flammable liquid, insoluble or very slightly soluble in water. Ventilate. Eliminate all sources of
Large Spill
ignition. Wear suitable protective clothing, gloves and eye/face protection. A self-contained breathing
apparatus should be used to avoid inhalation of the product. Warn personnel to move away. Stop leak if without
risk. DO NOT touch spilled material. Prevent entry into sewers, basements or confined areas; dike if needed.
Cover with WET earth, sand or other non-combustible material, or with DRY absorbent wetted with a neutralizing
solution (5% ammonia water, or 5-10% sodium carbonate in water). After 15 minutes transfer it to waste
container, or put in open drums - fill the drums half way. Do not seal - evolution of CO2 can cause pressure
build-up. Keep drums (not sealed) outside, or in safe ventilated area for a few days. After clean-up monitor the
vapors concentration. Use the neutralizing solution to decontaminate the surface and the tools. The spilled
material, clean-up residues, and spent decontamination solution are hazardous wastes. Call for assistance on
disposal.
Material Safety Data Sheet
Coroguard MCU Aliphatic Clear
Product Name:
Page: 4
Section 7. Handling and Storage
Keep locked up and out of reach of children. Manipulate in a well ventilated area. In case of insufficient ventilation, wear suitable respiratory equipment. Do
Precautions
not breathe gas/fumes/vapor/spray. Avoid contact with skin and eyes. Contact lenses should not be worn. Keep away from foodstuff, drinks and tobacco.
Eating, drinking and smoking should be prohibited in area where this material is handled, stored and processed. Workers should wash hands and face
before eating, drinking and smoking. Ensure that eyewash station and safety shower are proximal to the work-station location. In case of accident or if you
feel unwell, seek medical advice immediately (show the label when possible). Individuals with respiratory problems (asthma, chronic bronchitis), or allergic
to isocyanates or solvents, should avoid any contact with this product. ATTENTION: Isocyanate vapors cannot be smelled until concentrations are well
above the safe exposure limit! Ground all equipment containing material (during handling, mixing and spraying).
Keep away from heat. Keep away from sources of ignition. Keep container tightly closed and in a well-ventilated
Storage
place. Contains moisture sensitive material; store in a dry place. Keep away from incompatibles.
Section 8. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
Engineering Controls
threshold limit value. Ensure that eyewash station and safety shower are proximal to the work-station location. Do air monitoring if
possible.
During mixing, handling and application: Splash goggles. Full protective clothing. Gloves (impervious). Suitable respiratory equipment. When
Personal Protection
air concentrations are not known (or above the TLV), an air-supplied respirator or SCBA (self-contained breathing apparatus) is required.
Refer to OSHA Respiratory Protection Standard (29 CFR 1910.134). When welding, refer to OSHA Standard (29 CFR 1926.354): Welding,
Cutting and Heating in Way of Preservative Coatings.
ATTN: Air-purifying (cartridge type) respirators are not approved for protection against isocyanates due to their low warning properties.
Personal Protection in Case of Splash goggles. Full suit. Boots. Gloves (impervious). Self-contained breathing apparatus (for above TLV, or
unknown vapor concentrations), must be used to avoid inhalation af the product.
a Large Spill
Section 9. Physical and Chemical Properties
Liquid. Aromatic.
Physical state and Odor
appearance
Not available.
Taste
Molecular Weight Not applicable.
Color Clear
Neutral.
pH (1% soln/water)
ATTENTION: ISOCYANATE VAPORS CANNOT
Boiling Point The lowest known value is 117?(242.6? C F) Odor Threshold
BE SMELLED UNTIL CONCENTRATIONS ARE
( Me t h yl is o b u t yl k e t o n e ) . W e ig h t e d
WELL ABOVE THE SAFE EXPOSURE LIMIT!
average: 167.18?(332.9?br>
C F)
May start to solidify at -19?(-2.2?based
C F) The highest known value is 1.6 (Methyl
Evaporation rate
Melting Point
o n d a t a f o r : H o m o p o l ym e r o f H D I . is o b u t yl k e t o n e ) . W e ig h t e d a v e r a g e :
Weighted average: -37.26?(-35.1?br>
C F) 0.92compared to Butyl acetate.
Critical Temperature Not available. Not available.
Viscosity
1.02 (Water = 1) 0
Water/Oil Dist. Coeff.
Specific Gravity
The highest known value is 15 mm of Hg (@ Not available.
Vapor Pressure Ionicity (in Water)
20癈) (Methyl isobutyl ketone). Weighted
average: 5.24 mm of Hg (@ 20?C)
The highest known value is 7.67 (Air = 1) (Isophorone Is not dispersed in water.
Dispersion Properties
Vapor Density
Diisocyanate (IPDI)). Weighted average: 4.07 (Air =
1)
37% (v/v). 32% (w/w). Insoluble in water.
Volatility Solubility
Section 10. Stability and Reactivity Data
The product is stable.
Stability
Not available.
Instability Temperature
Not available.
Conditions of Instability
Incompatible with water, strong oxidizing agents, amines, strong bases, strong acids, alcohols. Absorbs
Incompatibility with various
moisture from the air. Reacts slowly with water to liberate CO2 gas.
substances
Not considered to be corrosive for glass and metals according to our data base.
Corrosivity
No additional remarks.
Special Remarks on
Reactivity
Material Safety Data Sheet
Coroguard MCU Aliphatic Clear
Product Name:
Page: 5
Section 11. Toxicological Information
Inhalation. Skin contact (absorption). Eye contact. Ingestion.
Routes of Entry
See: Section 2
Toxicity to Animals
Sensitive individuals may develop eczema and/or asthma on inhalation of this material. However, in light of good
Chronic Effects on Humans
industrial hygiene, exposure to any chemical should be kept to a minimum.
See: Section 3
Other Toxic Effects on
Humans
Embryofetotoxic in animal studies. (Xylene)
Special Remarks on
Toxicity to Animals
Isocyanates are not known to cause cancer in humans, but may cause skin and respiratory sensitization in
Special Remarks on
humans. Sensitive individuals may develop eczema and/or asthma on inhalation of this material. Exposure may
Chronic Effects on Humans
cause asthma, dermatitis and pulmonary oedema; effects may be delayed. Reports have associated repeated
and prolonged occupational exposure to solvents with permanent brain and nervous system damage, and other
systemic effects. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal.
Exposure can cause nausea, headache and vomiting. Over-exposure can cause lung irritation, chest pain and
Special Remarks on other
oedema which may be fatal. Sensitizer - skin and inhalation.
Toxic Effects on Humans
Section 12. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD5 and COD
Not available.
Products of Biodegradation
Not available.
Toxicity of the Products
of Biodegradation
No additional remarks.
Special Remarks on the
Products of Biodegradation
Section 13. Disposal Considerations
In accordance with municipal, state, and federal regulations. Consult your local or regional authorities. Empty
Waste Disposal
containers must be handled with care due to product residue. Do not heat or cut empty containers with electric
or gas torch.
Section 14. Transport Information
DOT Classification DOT CLASS 3: Flammable liquid with a flash point lower than 37.8?(100?br>
C F). PG: II
PIN: UN1263 - Paint.
DOT Identification
number
No specific remarks.
Special Provisions for
Transport
DOT (Pictograms)
Material Safety Data Sheet
Coroguard MCU Aliphatic Clear
Product Name:
Page: 6
Section 15. Other Regulatory Information and Pictograms
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200). TSCA (Toxic
Other Regulations
Substance Control Act): All components of this product are listed on the TSCA Inventory.
Other Classifications WHMIS (Canada)
DSCL (EEC)
Fire Hazard
Hazardous Material 3 National Fire Protection
Health Hazard
3
Information System Association (U.S.A.)
3
Fire Hazard
3 0 Reactivity
(U.S.A.) Health
0
Reactivity
Specific hazard
x
Personal Protection
WHMIS (Canada)
(Pictograms)
DSCL (Europe)
(Pictograms)
TDG (Canada)
(Pictograms)
ADR (Europe)
(Pictograms)
Protective Clothing
(Pictograms)
Section 16. Other Information
Manufacturer's MSDS, RTESC, NIOSH, CCOHS.
References
Hazardous Chemicals Desk Reference, R.J. Lewis, Sr. 2nd ed. 1991 Van Nostrand Reinhold.
Hawley, G.G.. The Condensed Chemical Dictionary, 12th ed., New York N.Y., Van Nostrand Reinhold, 1987.
Medical supervision of all employees who come in contact with this product is recommended (pre-employment and
Other Special
periodic medical examination). Individuals with respiratory problems (asthma, chronic bronchitis), or allergic to
Considerations
isocyanates or solvents, should avoid any contact with this product.
Verified by Heidi Brown.
Validated by Heidi Brown on 2007-03-29.
Printed 2007-03-29.
EMERGENCY PHONE NUMBERS:
USA and Canada: 1-800 424-9300
Notice to Reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries
assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any
material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain
hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|