Material Safety Data Sheet

        Section 1          General Information

Manufacturer:

Wolman Wood Care Products

Zinsser Company, Inc.

173 Belmont Drive

Somerset, NJ 08875

(732) 469-8100



Emergency Telephone:         Chemtrec (800) 424-9300                    Date: May 18, 2004

                         Wolman?RainCoat?Clear Water Repellent ?Oil Base

Product Name:

Product Codes:           12383          12385        12386              12387



        Section 2          Hazardous Ingredients

                                                             OSHA                       ACGIH

Hazardous Component                     CAS#                 PEL                        TLV



3-iodo-2-propynyl butyl carbamate       55406-53-6           N/E                        N/E

Mineral Spirits                         64742-88-7           400 ppm            N/E





        Section 3          Hazard Identification

Emergency Overview:          This material is an amber colored liquid with a mild odor and a

flash point of 104?F. The material is used as a water repellent to protect wood surfaces.

Primary Routes of Exposure:

       Eye

       Skin

       Inhalation

Potential Acute Health Effects:

Eye:    Direct contact with liquid or vapor may cause eye irritation.

Skin: Prolonged or repeated contact may cause irritation. May be absorbed through the skin.



Ingestion:     May be harmful if swallowed. May cause vomiting. Aspiration of this product

into the lung may cause chemical pneumonitis which can be fatal.

Inhalation: Avoid breathing vapors or mists. High concentrates may lead to central nervous

system effects (drowsiness, dizziness, nausea, headaches). Prolonged or repeated inhalation and

ingestion may cause delayed injury involving the kidneys and the blood.









MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                          Page 1 of 6 pages.

Potential Chronic Health Effects:

Signs and Symptoms:            Individuals with pre-existing disease in, or a history of ailments

involving the skin, eye, respiratory tract, liver, kidney, central nervous system are at a greater

than normal risk of developing adverse effects when exposed to this material.

(See also Sections 4, 8, and 11 for related information)



        Section 4         First Aid Measures

Eye contact:      Immediately flush with plenty of water for 15 minutes. Get medical attention.

Skin contact: Wash thoroughly with soap and water. If redness, itching, burning or other

symptoms develop or persist, get medical attention. Wash contaminated clothing before reuse.

Ingestion:      If swallowed, do NOT induct vomiting. Give victim a glass of milk or water.

Get medical attention. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS

PERSON.

Inhalation:       Remove to fresh air. If not breathing, give artificial respiration. If breathing is

difficult, give oxygen. Get medical attention.

Note to Physician: There is no specific antidote for effects from overexposure to this

material. Treatment should be directed at the control of symptoms and the clinical condition.



        Section 5         Fire Fighting Measures

Flash Point:                    104?F (40?C)

Flammable Limits in Air:        Lower (LEL): N/D

                                Upper (UEL): N/D

Extinguishing Media:            Use dry chemical, carbon dioxide, foam or water spray.

Protection of Firefighters: Wear complete fire service protective equipment, including full-

face, self-contained breathing apparatus. Use water to cool fire-exposed container/

structure/protect personnel. Toxic vapors may be given off in a fire.

Fire and Explosion Hazards:          When heated (fire conditions), vapor/decomposition

products may be released forming flammable mixtures in air. Closed containers may explode

when exposed to extreme heat (fire.)



        Section 6         Accidental Release Measures

Clean Up Methods:          Stop leak if you can do so without risk of injury. Keep spill out

of sewer and open bodies of water. Avoid runoff into storm sewers and ditches that lead

to waterways. For small spills, dike and contain with inert material (sand, earth, etc.) and

transfer liquid to containers for recovery or disposal. For large spills, dike far ahead of

N/A: Not Applicable   N/D: Not Determined   N/E: Not Established   N/R: Not Required          Est.: Estimated



MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                           Page 2 of 6 pages.

the spill. Absorb remaining liquid with absorbent material. Keep unnecessary people

away. Isolate hazard area and deny entry to unauthorized personnel. Stay upwind, keep

out of low areas, and ventilate closed spaces before entering.

(See also Section 8 for information on Exposure Controls and Personal Protective Equipment)



        Section 7         Handling and Storage

Handling:      Avoid skin and eye contact. Avoid breathing vapors. Use with adequate

ventilation. Wash thoroughly after handling. Observe good personal hygiene practices.

Keep contents and freshly treated articles away from flame, food, and living plants. Do

not contaminate water by cleaning equipment or disposing of waste. For exterior use

only. This product should be applied to articles that are to remain outdoors. When

applying this product, care should be taken as to not to allow vapors to enter indoor areas.

Keep out of reach of children.

Storage:      Store at ambient temperature. Keep containers tightly closed and upright

when not in use. Protect against physical damage. Store away from caustics and oxidizers.

Keep containers from excessive heat or freezing. Do not store at temperatures above 120?F.

Maintain good housekeeping.

Other:      Do not use until manufacturer's directions and precautions have been read and

understood.



        Section 8         Exposure Controls / Personal Protection

Engineering Controls:          Provide sufficient mechanical ventilation (local exhaust or general

room dilution) to maintain exposure levels below applicable exposure levels. Vapors are heavier

than air. Flammable vapors may collect in low areas. Check all low areas (basements, sumps,

etc.) for vapor before entering.



Personal Protective Equipment (PPE):

Eye Protection: Wear chemical splash goggles, safety glasses with side shields, or full-face

mask.

Skin Protection:   Chemical resistant gloves (rubber, nitrile, etc.), long sleeved shirts and long

pants are recommended to avoid skin contact.

Respiratory Protection:     None normally required under anticipated use conditions. A

NIOSH approved air-purifying respirator with an organic vapor cartridge or canister should be

used be in circumstances where airborne concentrations are expected to exceed exposure limits.

Other Protective Clothing:        Impervious apron and rubber boots to prevent skin contact.









N/A: Not Applicable   N/D: Not Determined   N/E: Not Established   N/R: Not Required          Est.: Estimated



MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                           Page 3 of 6 pages.

General Hygiene Practices: Remove contaminated clothing and wash before reusing. To

avoid accidental ingestion, do not eat, drink, smoke, or apply cosmetics while handling this

material.



        Section 9           Physical Data

Appearance:                Amber liquid                   Odor: Mild petroleum odor

Physical State:            Liquid                         pH:        N/D

Boiling Point:             313 F/156C                     Melting Point:            N/D

Vapor Pressure:            2 mm Hg @ 20 C                 Vapor Density (AIR=1):            N/D

Odor Threshold:            N/D                            Viscosity:        N/D

Solubility in Water:          Negligible                  Wt. per Gallon (lbs.):            6.80



        Section 10            Stability and Reactivity

Stability:       Stable.                   Hazardous Polymerization: None

Hazardous Decomposition Products:              May produce carbon monoxide or carbon dioxide by

thermal decomposition.

Conditions to Avoid:             Keep away from heat, sparks, open flame and fire.

Incompatibility:           Strong oxidizing materials.



        Section 11            Toxicological Information

Carcinocenicity:       This material is not considered a carcinogen by IARC or NTP and is not

regulated as a carcinogen by OSHA.

(See also Section 15 for related information)



        Section 12            Ecological Information

Chemical Fate and Effects:          Product has not been tested for ecotoxicity.



        Section 13            Disposal Considerations

RCRA Hazardous Waste: This material, when discarded or disposed of, could be a hazardous

waste according to federal regulations (40 CFR 261). The transportation, storage, treatment, and

disposal of this waste must be conducted in compliance with 40 CFR 262, 263, 264, 268, and

270. Disposal can only occur in properly permitted facilities. Check state and local regulations

for any additional requirements as these may be more restrictive than federal laws and

regulations. Chemical additions, processing or otherwise altering this material may make the

N/A: Not Applicable   N/D: Not Determined     N/E: Not Established    N/R: Not Required          Est.: Estimated



MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                              Page 4 of 6 pages.

waste management information presented in this MSDS incomplete, inaccurate, or otherwise

inappropriate.



        Section 14          Transportation Information

Regulated by the US DOT:          No. This product is not considered a hazardous material by DOT.

Freight Classification:           Wood Preservative, N.O.I., Liquid



        Section 15          Regulatory Information

CERCLA:

The Comprehensive Environmental Response Compensation and Liability Act of 1980 (CERCLA)

requires notification to the National Response Center for releases of quantities of Hazardous Substances

equal to or greater than the reportable quantities (RQs) in 40 CFR 302.4 (for CERCLA 102).



      Components present in this product at a level which could require reporting under the statute are:



        Chemical Name                    CAS#                       Maximum Concentration (Wt. %)

        None                             N/A                        N/A



SARA Title III, section 311/312:

The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires emergency

planning based on Threshold Planning Quantities (TPQs) and release reporting based on Reportable

Quantities (RQs) in 40 CFR 355 (used for SARA 302, 304, 311 and 312).



      Components present in this product at a level which could require reporting under the statute are:



        Chemical Name                    CAS#                       Maximum Concentration (Wt. %)

        None                             N/A                        N/A



SARA Title III, section 313:

The Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires submission of

annual reports of release of toxic chemicals that appear in 40 CFR 372 (for SARA 313).



      Components present in this product at a level which could require reporting under the statute are:



        Chemical Name                              CAS#             Maximum Concentration (Wt. %)

        3-iodo-2-propynyl butyl carbamate          55406-53-6       0.5%



TSCA:

The components of this mixture are listed in the Toxic Substance Control Act Inventory of Chemical

Substances.



This product contains the following chemicals which require export notification under section

12(b) of the TSCA regulation:

        Chemical Name                    CAS#                       TSCA Section

        1,2,4 Trimethylbenzene           95-63-6                    Sec. 4





N/A: Not Applicable   N/D: Not Determined    N/E: Not Established    N/R: Not Required          Est.: Estimated



MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                             Page 5 of 6 pages.

        Section 16           Other Information

Legend: N/A: Not Applicable                                 N/D: Not Determined

            N/E: Not Established                            N/R: Not Required

            STEL: Short Term Exposure Limit                 C: OSHA Ceiling Value

                                                            mg/m3: milligrams per cubic meter

            cps: Centipoise

            mppcf: million particles per cubic foot of air. PPM: Parts Per Million

            PPB: Parts Per Billion                          PEL: Permissible Exposure Limit

            TLV: Threshold Limit Value                      TWA: Time Weighted Average

            ACGIH: American Conference of Governmental Industrial Hygienists

            CPSC: Consumer Product Safety Commission

            FHSA: Federal Hazardous Substance Act

            OSHA: Occupational Safety and Health Administration (US Dept. of Labor)

            RCRA: Resource Conservation and Recovery Act

            SARA: Superfund Amendment and Reauthorization Act

            Skin: This substance has the potential to be absorbed systemically through the skin.

            TSCA: Toxic Substance Control Act



        HMIS Key

        4 = Severe Hazard

        3 = Serious Hazard

        2 = Moderate Hazard

        1 = Slight Hazard

        0 = Minimal Hazard



Prepared By:     Zinsser Health and Safety Manager, Regulatory Compliance Dept.

                 173 Belmont Drive       Somerset, NJ 08875        (732) 469-8100



Disclaimer: Zinsser Company, Inc. believes, to the best of its knowledge, information and belief, the

information contained herein to be accurate and reliable as of the date of this material safety data sheet.

However, because the conditions of handling, use, and storage of these materials are beyond our control,

we assume no responsibility or liability for personal injury or property damage incurred by the use of

these materials and make no warranty, expressed or implied, regarding the accuracy or reliability of the

data or results obtained from their use. All materials may present unknown hazards and should be used

with caution. The information and recommendations in this material safety data sheet are offered for the

users' consideration and examination. It is the responsibility of the user to determine the final suitability

of this information and data and to comply with all applicable international, federal, state, and local laws

and regulations.









N/A: Not Applicable    N/D: Not Determined    N/E: Not Established    N/R: Not Required          Est.: Estimated



MSDS Code: RainCoat Clear - Oil-Base (5-18-04)                              Page 6 of 6 pages.