JIF CREAM REGULAR
PRODUCT NAME
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Supplier Name JOHNSONDIVERSEY AUSTRALIA PTY LTD
Address 29 Chifley St, Smithfield, NSW, AUSTRALIA, 2164
Telephone (02) 9757 0300
Fax (02) 9725 5767
Emergency 1800 033 111 (24 hrs)
Email
Web Site http://www.johnsondiversey.com
Synonym(s) HH12105 JIF REGULAR 20X375ML, HH12106 JIF REGULAR 12X750ML , HH12102 JIF 6X2L
Use(s) CREAM CLEANSER
2. HAZARDS IDENTIFICATION
NOT CLASSIFIED AS HAZARDOUS ACCORDING TO NOHSC CRITERIA
NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE
UN No. None Allocated Hazchem Code Pkg Group
None Allocated None Allocated
DG Class None Allocated Subsidiary Risk(s) EPG None Allocated
None Allocated
3. COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient Formula Conc. CAS No.
NON HAZARDOUS INGREDIENTS Not Available 100% Not Available
4. FIRST AID MEASURES
Eye Flush gently with running water for 15 minutes.
Inhalation If over exposure occurs leave exposure area immediately. If irritation persists, seek medical attention.
Skin Gently flush affected areas with water.
Ingestion For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor. If swallowed, do not
induce vomiting.
Advice to Treat symptomatically
Doctor
First Aid Eye wash facilities and safety shower are recommended.
Facilities
5. FIRE FIGHTING MEASURES
Flammability Non flammable. No fire or explosion hazard exists.
Fire and Non flammable. Evacuate area and contact emergency services. Remain upwind and notify those downwind of
hazard. Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating
Explosion
fire. Use waterfog to cool intact containers and nearby storage areas.
Extinguishing Non flammable.
Page 1 of 3
RMT
Reviewed: 24 04 2006
Printed: 14 09 2006
PRODUCT NAME JIF CREAM REGULAR
Hazchem Code None
6. ACCIDENTAL RELEASE MEASURES
Spillage If spilt (bulk), absorb with sand or similar, collect and place in sealable containers for disposal. Caution, spill site
may be slippery.
7. STORAGE AND HANDLING
Storage Store in cool, dry, well ventilated area, removed from oxidising agents, acids and foodstuffs. Ensure product is
adequately labelled.
Handling Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin
contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,
drinking and smoking in contaminated areas (eg. if container is damaged).
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Ventilation Ensure adequate natural ventilation.
PPE No Personal Protective Equipment is normally required.
9. PHYSICAL AND CHEMICAL PROPERTIES
SOLUBLE
Appearance: VISCOUS OPAQUE WHITE LIQUID Solubility (water):
1.550 (Approximately)
Odour: CHARACTERISTIC ODOUR Specific Gravity:
NOT AVAILABLE
pH: 10 - 11 % Volatiles:
NON FLAMMABLE
Vapour Pressure: NOT AVAILABLE Flammability:
NOT RELEVANT
Vapour Density: NOT AVAILABLE Flash Point:
NOT RELEVANT
Boiling Point: NOT AVAILABLE Upper Explosion Limit:
NOT RELEVANT
Melting Point: NOT AVAILABLE Lower Explosion Limit:
NOT AVAILABLE
Evaporation Rate: NOT AVAILABLE Autoignition Temperature:
Exposure Standard: NOT AVAILABLE
10. STABILITY AND REACTIVITY
Reactivity Incompatible with oxidising agents (eg. peroxides) and acids (eg. hydrochloric acid).
Decomposition May evolve toxic gases if heated to decomposition.
Products
11. TOXICOLOGICAL INFORMATION
Health Hazard No adverse health effects are anticipated with normal use of this product.
Summary
Eye Exposure may result in irritation and lacrimation.
Inhalation Adverse health effects are not anticipated under normal conditions of use.
Skin Prolonged and repeated contact with the skin may result in mild irritation.
Ingestion Ingestion may result in headache, nausea, vomiting, gastrointestinal irritation and diarrhoea.
Toxicity Data No LD50 data available for this product.
12. ECOLOGICAL INFORMATION
Environment This product is not anticipated to cause adverse effects to animal or plant life if released to the environment in
small quantities. Not expected to bioaccumulate.
13. DISPOSAL CONSIDERATIONS
Waste Disposal For small amounts absorb with sand, vermiculite or similar and dispose of to an approved landfill site. Contact the
manufacturer for additional information if larger amounts are involved. Prevent contamination of drains and
waterways as aquatic life may be threatened and environmental damage may result.
Legislation Dispose of in accordance with relevant local legislation.
Page 2 of 3
RMT
Reviewed: 24 04 2006
Printed: 14 09 2006
JIF CREAM REGULAR
PRODUCT NAME
14. TRANSPORT INFORMATION
Shipping Name None Allocated
UN No. None Allocated Hazchem Code None Allocated Pkg Group None Allocated
DG Class None Allocated Subsidiary Risk(s) None Allocated EPG None Allocated
15. REGULATORY INFORMATION
Poison A poison schedule number has not been allocated to this product using the criteria in the Standard for the
Schedule Uniform Scheduling of Drugs and Poisons (SUSDP).
AICS All chemicals listed on the Australian Inventory of Chemical Substances (AICS).
16. OTHER INFORMATION
Additional ABBREVIATIONS:
mg/m3 - Milligrams per cubic metre
Information
ppm - Parts Per Million
TWA/ES - Time Weighted Average or Exposure Standard.
CNS - Central Nervous System
NOS - Not Otherwise Specified
pH - relates to hydrogen ion concentration - this value will relate to a scale of 0 - 14, where 0 is highly acidic and
14 is highly alkaline.
CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.
M - moles per litre, a unit of concentration.
IARC - International Agency for Research on Cancer.
PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:
The recommendation for protective equipment contained within this Chem Alert report is provided as a guide
only. Factors such as method of application, working environment, quantity used, product concentration and the
availability of engineering controls should be considered before final selection of personal protective equipment is
made.
HEALTH EFFECTS FROM EXPOSURE:
It should be noted that the effects from exposure to this product will depend on several factors including:
frequency and duration of use; quantity used; effectiveness of control measures; protective equipment used and
method of application. Given that it is impractical to prepare a Chem Alert report which would encompass all
possible scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.
This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the
Report Status
manufacturer's Material Safety Data Sheet ('MSDS').
It is based on information concerning the product which has been provided to RMT by the manufacturer or
obtained from third party sources and is believed to represent the current state of knowledge as to the
appropriate safety and handling precautions for the product at the time of issue. Further clarification regarding
any aspect of the product should be obtained directly from the manufacturer.
While RMT has taken all due care to include accurate and up-to-date information in this MSDS, it does not
provide any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any
loss, injury or damage (including consequential loss) which may be suffered or incurred by any person as a
consequence of their reliance on the information contained in this MSDS.
Risk Management Technologies
Prepared By
5 Ventnor Ave, West Perth
Western Australia 6005
Phone: +61 8 9322 1711
Fax: +61 8 9322 1794
Email: info@rmt.com.au
Web: www.rmt.com.au
MSDS Date: 01 April 2006
End of Report
Page 3 of 3
RMT
Reviewed: 24 04 2006
Printed: 14 09 2006
|