MSDS Page 1 of 5
Shin-Etsu MicroSi, Inc.
Part No. 182759-004.doc
Doc. No.
MATERIAL SAFETY DATA SHEET
This MSDS is compatible with ISO 11014 ?1:1994 and conforms to ANSI standard Z400.1 ?1993.
Section 1: Chemical Product and Company Identification
CHEMICAL SUPPLIER COMPANY NAME EMERGENCY TELEPHONE
Shin-Etsu MicroSi, Inc. Chemtrec 24 hrs: (800) 424-9300
10028 South 51st Street Information: (480) 893-8898
Phoenix, AZ 85044 Fax. (480) 893-8637
MANUFACTURER'S NAME: Shin-Etsu Chemical Co. Ltd.
ADDRESS: 6-1, 2-Chrome, Ohtemachi, Chiyodaku, Tokyo, Japan
TELEPHONE NUMBER: 03-3246-5345 Tokyo, Japan
DATE PREPARED: 11/06/1998 DATE REVIEWED: 07/17/2002
G-751
PRODUCT NAMES:
CHEMICAL NAME: Silicone Fluid Compound
CHEMICAL FAMILY: Organopolysiloxane Mixture
FORMULA: Mixture
Section 2: Composition, Information on Ingredients
PRODUCT wt. ACGIH OSHA UNITS CAS NO.
COMPOSITION % TLV PEL
Silicone Fluid Compound 100 Not Established Not Established Not Applicable Mixture
Some items on this MSDS may be designated as trade secrets. Bonafide requests for disclosure of trade secret information to medical personnel
must be made in accordance with the provisions contained in 29 CFR 1910.1200 I 1-13.
HAZARDOUS COMPONENTS: No hazardous materials present.
Section 3: Hazards Identification
HAZARD CLASSIFICATION: Not classified as hazardous based on IMO and DOT.
FIRE AND EXPLOSION:
Not considered flammable or combustible, but this substance will burn if involved in a fire. Emits
toxic fumes when burned.
This product (preparation) has been determined to be non dangerous according to the European Community
Directives 67/548/EEC and 1999/45/EC and subsequent amendments.
Danger Symbol: n/a
Risk Phrase: n/a
Safety Phrase: n/a
POTENTIAL HEALTH EFFECTS
SKIN CONTACT: May cause slight skin irritation.
EYE CONTACT: May cause slight eye irritation.
INGESTION: No information is available.
INHALATION: Not applicable.
Copyright Shin-Etsu Chemical Co. Ltd.
MSDS Page 2 of 5
Shin-Etsu MicroSi, Inc.
Part No. 182759-004.doc
Doc. No.
Section 4: First Aid Measures
SKIN CONTACT:
Remove product from skin with dry cloth or towel and wash exposed area with soap and water.
EYE CONTACT:
Immediately flush eyes with plenty of water for at least 15 minutes. Consult a Physician
INGESTION:
If swallowed, wash out mouth with water. Never give anything by mouth to an unconscious
person. Consult a Physician.
INHALATION:
Not applicable. Be aware, if decomposition products are inhaled, remove to fresh air. If victim is
not breathing give artificial respiration, preferably mouth-to-mouth. Consult a Physician.
Section 5: Fire-fighting Measures
FLASH POINT: Not Applicable
FLAMMABLE LIMITS IN AIR (% by vol.): Lower: Not Measured, Upper: Not Measured
EXTINGUISHING MEDIA: Foam, Dry Chemical, or CO2 or water spray.
SPECIAL FIREFIGHTING PROCEDURES:
Wear appropriate protective equipment, including NIOSH璦pproved respirator. Work from the
upwind side of the fire. Use suitable extinguishing agents. If possible, move the container to a safe
area. If it cannot be removed from fire danger, protect it from destruction then cool container and
vicinity by spraying with water. If ignited and it cannot be extinguished easily, evacuate the area
and call your emergency responders.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Emits toxic fumes when burned. Do not inhale decomposition products. Disperse harmful
atmospheres by ventilating with air.
Section 6: Accidental Release Measures
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED:
Wear proper protective equipment and warn unnecessary people away. Eliminate all sources of
ignition and ventilate area. Contain or dike the spill or leak. Take up spilled material with rag or
cardboard. Place in a chemical waste container for later disposal. Avoid contacting spilled
material with acids, bases, or oxidizing materials to prevent generation of hydrogen gas. Prevent
spills from entering sewers or watercourses.
DISPOSAL METHOD:
Disposal should be made in accordance with Federal, State and local regulations. Incineration is
recommended.
Section 7: Handling and Storage
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Store upright in a cool, dry place. Keep container closed when not in use.
Keep away from heat, sparks, flame, direct sunlight and other possible sources of ignition.
Wear proper protective equipment and avoid contact with skin, eyes or clothing.
Wash hands and face after handling this material. Keep out of reach of children.
Do not smoke cigarettes which have come in contact with this material.
Follow all regulations in pertaining to this material in your country.
INFORMATION ON EMPTIED CONTAINER
Do not reuse this container. Do not puncture, cut or weld on or near this container.
Keep empty container away from heat, sparks, flame, and other possible sources of ignition.
Dispose of this container according to local, state, and federal laws in your country.
Copyright Shin-Etsu Chemical Co. Ltd.
MSDS Page 3 of 5
Shin-Etsu MicroSi, Inc.
Part No. 182759-004.doc
Doc. No.
Section 8: Exposure Controls/Personal Protection
EXPOSURE GUIDELINES
ACGIH TLV-TWA: Not Established
ACGIH STEL: Not Established
OSHA PEL: Not Established
VENTILATION:
Good general, mechanical, room ventilation is recommended but not required.
SPECIAL VENTILATION CONTROLS: Not required.
RESPIRATORY PROTECTION:
Use only NIOSH approved respirator suitable for concentrations and type of air contaminants
encountered if required by your process.
PROTECTIVE GLOVES: Plastic Film or Rubber Gloves
EYE PROTECTION: Goggles, Safety Glasses, Faceshield
PROTECTIVE CLOTHING:
Wear suitable protective clothing to prevent skin contact.
OTHER EQUIPMENT:
Make safety shower, eyewash stations and handwashing equipment available in the work area.
WORK/HYGIENE PRACTICES:
Avoid contact with eyes and prolonged, repeated skin contact. Wash hands and face after handling.
Section 9: Physical and Chemical Properties
BOILING POINT: Not Applicable
VAPOR PRESSURE(@25 oC): Negligible
VAPOR DENSITY(AIR=1): Not Applicable
SPECIFIC GRAVITY(@25 oC): 2.4 to 2.8
MELTING POINT: Not Applicable
EVAPORATION RATE(BUTYL ACETATE = 1): Negligible
SOLUBILITY IN WATER: Not Soluble
APPEARANCE - COLOR: Gray
PHYSICAL STATE: Grease or Paste
ODOR: Slight Odor
Section 10: Stability and Reactivity
STABILITY: Stable.
CONDITIONS TO AVOID: None.
INCOMPATIBILITY (MATERIALS TO AVOID): None.
HAZARDOUS DECOMPOSITION PRODUCTS: Emits toxic fumes when burned.
HAZARDOUS POLYMERIZATION: Will not occur.
Section 11: Toxicological Information
SKIN IRRITATION: No Data is Available
EYE IRRITATION: No Data is Available
ACUTE TOXICITY (LD50): No Data is Available
ACUTE TOXICITY (LC50): No Data is Available
CHRONIC TOXICITY: No Data is Available
CARCINOGENICITY
NTP: Not listed
IARC: Not Listed
OSHA REGULATED: Not listed
OTHER INFORMATION: 1999/45/EC Annex II No Toxicological hazards
Copyright Shin-Etsu Chemical Co. Ltd.
MSDS Page 4 of 5
Shin-Etsu MicroSi, Inc.
Part No. 182759-004.doc
Doc. No.
Section 12: Ecological Information
BIODEGRADATION: No information is available.
BIOACCUMULATION: No information is available.
AQUATIC TOXICITY: No information is available.
1999/45/EC Annex III No Environmental hazards
OTHER INFORMATION: None
Section 13: Disposal Considerations
Can be burned in a chemical incinerator equipped with an afterburner and scrubber. Do not dispose
of the emptied container unlawfully. Observe all federal, state, and local laws in your country.
Section 14: Transport Information (per 49 CFR 172.101)
UN N0.: Not Regulated
IMO CLASSIFICATION AND CLASS,
and DOT HAZARD CLASS: Not Regulated
DOT LABELS: None
PLACARD: None
PACKAGING GROUP: Not Regulated
DOT PROPER SHIPPING NAME,
and EXPORT SHIPPING NAME: None
TECHNICAL SHIPPING NAME: None
MARINE POLLUTANT: Not Regulated
DOT REPORTABLE QUANTITY (49 CFR 172.101, APP.) and CERCLA REPORTABLE QUANTITY
(40 CFR PART 302, TABLE 302.4) HAZARDOUS SUBSTANCE(S) NAME / (CAS NO.), CONTENT(S)
AND RQ: None.
Section 15: Regulatory Information
TOXIC SUBSTANCES CONTROL ACT (TSCA) STATUS:
This product should be used in compliance with low volume exemptions (LVE) under TSCA.
Under the LVE rules, this product is in compliance with rules, regulations and/or orders of TSCA.
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III
SECTION 313 SUPPLIER NOTIFICATION:
This regulation requires submission of annual reports of toxic chemical(s) that appear in section
313 of the Emergency Planning and Community Right To Know Act of 1986 and 40 CFR 372.
This information must be included in all MSDS's that are copied and distributed for the material.
The toxic chemicals contained in this product are: Zinc Oxide, CAS No. 1314-13-2, ca. 20%.
CALIFORNIA PROPOSITION 65:
This regulation requires a warning for California Proposition 65 chemical(s) under the statute.
The California Proposition 65 Chemical(s) contained in this product are: None.
This product has been reviewed for compliance with the following European Community Directives:
Directive 67/548/EEC, Directive 2001/59/EC, Directive 1999/45/EC, Directive 91/155/EC, and Directive
2001/58/EC.
COMPONENT EINEC/ELINC EINEC/ELINC CMR DANGER RISK SAFETY WGK
NUMBER STATUS CLASSIFICATION SYMBOL PHRASE PHRASE
NUMBER NUMBER
Mixture N/A Not listed Not Classified N/A Not Safe 0
Hazardous
Copyright Shin-Etsu Chemical Co. Ltd.
MSDS Page 5 of 5
Shin-Etsu MicroSi, Inc.
Part No. 182759-004.doc
Doc. No.
EINECS: European Inventory of Existing Commercial Chemical Products.
ELINCS: European List of Notified Chemical Substances
Section 16: Other Information
FOR INDUSTRIAL USE ONLY:
This material safety data sheet is offered solely for your information, consideration and
investigation. The data described in this MSDS consist of data on literature, our acquisitional data,
and analogical inference by data of similar chemical substances or products. Shin-Etsu Chemical
Co. Ltd. provides no warranties, either expressed or implied, and assumes no responsibility for the
accuracy or completeness of the data contained herein. Final determination of the suitability of any
material is the sole responsibility of the user.
ADDITIONAL INFORMATION:
The information contained within this MSDS is released in good faith and believed to be accurate.
No agent of Shin-Etsu Chemical Co., Ltd's, and its subsidiaries, are authorized vary any MSDS
data, and its agents disclaim all liability for any action taken or foregone on reliance upon such
data. Conditions of use are beyond Shin-Etsu Chemical Co., Ltd's, and its subsidiaries control and
therefor the users are responsible to verify this data under their own particular purposes and they
alone assume all risks of their use, handling, disposal and reliance upon the information provided
herein. This information applies only to the product designated above and does not necessarily
apply to its use in combination with other materials, products, chemical compounds, structures or
processes.
Copyright Shin-Etsu Chemical Co. Ltd.
|