MATERIAL SAFETY DATA SHEET
LaMOTTE COMPANY
PO BOX 329 - CHESTERTOWN - MARYLAND - 21620
TELEPHONE # FOR INFORMATION 410-778-3100
24 Hour Emergency Number (CHEM-TEL) 800-255-3924
1. PRODUCT IDENTIFICATION
Aluminum Test Solution Code Nr. 5101
2. HAZARDOUS INGREDIENTS
NAME CAS # TSCA # % PEL TLV
^ Isopropanol 67-63-0 >99 400 ppm 400 ppm
3. NON-HAZARDOUS INGREDIENTS EXCEPT WATER (7732-18-5)
NAME CAS # %
Hematein 475-25-2 0.1
4. PHYSICAL DATA
Appearance: Clear Red Liquid
Solubility in Water: Soluble Odor: Alcohol 82 deg C N/A
Boiling Point: Melt. Point:
Vapor Pressure: 33mm Hg@ 20degC Vapor Density: 2 (Air=1) pH: N/A
5. FIRE AND EXPLOSION DATA
Flash Point (method used) 17 deg C-closed cup 2% UEL: 12%
Flammable Limit: LEL:
Extinguishing Media: Dry chemical, CO2, or water spray
HMIS Hazard: Health - 1 Flammability - 3 0
Reactivity - Scale: 4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Least
Special Fire Fighting Procedures:
Firefighters wear self-contained breathing apparatus
Unusual Fire & Explosion Hazard:
Vapors may travel to ignition source and flash back.
6. REACTIVITY DATA
Conditions to avoid: Heat, sources of ignition
Stability:
Incompatibility (Materials to avoid):
Stable
Contact with nitric acid or other strong oxidizers
Unstable
Hazardous Decomposition Products: COx
7. HEALTH HAZARD DATA
Toxicity: orl rat LD50: 5840 mg/kg for isopropanol; orl hmn LDLo: 3570 mg/kg
Primary Route of Entry: Skin Carcinogenicity:
Inhalation None NTP
Ingestion N/ A OSHA IARC
Other Health Related Comments:
Target Organs: Eyes, Lungs, Skin, Central Nervous System
Signs and symptoms of exposure:
Vapor and liquid harmful. Irritating to eyes, nose and skin. Inhalation causes dizziness, headache, drowsiness, difficult breathing.
Medical Condition Aggravated by Exposure: N/A
8. EMERGENCY FIRST AID PROCEDURES
Eye Contact: Immediately flush with water for 15 minutes. Consult physician.
Ingestion: Do not induce vomiting. Drink plenty of water. Call a doctor immediately.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen.
Skin Contact:
Flush skin with water. Wash with soap and water.
9. SPILL AND DISPOSAL PROCEDURES
Spill and Leak:
Eliminate all sources of ignition. Absorb on paper. Evaporate on iron pan in hood.
Disposal:
Small quantity: Flush down drain with excess water. Large quantity: Atomize into incinerator. Dispose according to federal, state and local regulations.
10. PRECAUTIONARY MEASURES
In Handling: Gloves Eye Protection N/A Other: Lab Coat
Ventilation Normal Mechanical Respiratory Protection
Work/Hygienic Practices: Use with adequate ventilation and avoid contact with skin and eyes.
11. SPECIAL PRECAUTIONS
Do not use near heat or flame
DATE: 4/11/2000 The above information is believed to be correct but does not claim to be all inclusive and should be used only as a guide.
^ This is a toxic chemical subject to reporting requirements of section 313 of EPCRA and 40CFR372.