MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL XL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 1 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
SECTION I - PRODUCT AND COMPANY INFORMATION
Product Name: RONDA-COOL XL
CAS Number MIXTURE
Hazard Rating: Health: 1 Fire: 1 Reactivity: 0 PPI: E
EPA Registration NA
Company Identification: Michael Weinig, Inc.
124 Crosslake Park Drive
P.O. Box 3158
Mooresville, NC 28117
Contact: CUSTOMER SERVICE
Telephone/Fax: (704) 799-0100 / (704) 799-7400
Emergency Phone (24 Hour): INFOTRAK - (800) 535-5053.
Product Class WATERBASE LUBRICANT
Trade Name CARBIDE GRINDING FLUID
Product Code PTW.700050
SECTION II - INGREDIENT AND HAZARD INFORMATION
Hazardous Ingredients
CAS Number % TSCA Health Fire React PP
PROPRIETARY ALKYLALKANOLAMINE MIXTURE
Not available 10 - 30 Y 3 1 0 H
SODIUM BORATE
1330-43-4 1-5 Y 1 0 0 E
TRIAZINE
4719-04-4 1-5 Y 2 1 1 B
*** ALL Ingredients in this product are listed in the T.S.C.A. Inventory
SECTION III - HAZARDS IDENTIFICATION
PRIMARY ROUTES OF ENTRY:
Inhalation, and/or skin contact. Inhalation and skin contact are expected to be the primary routes of
occupational exposure to ALKYLALKANOLAMINES. This material is considered, on the basis of
single exposure animal tests, to be slightly to moderately toxic after skin contact and corrosive to the
eyes. Vapors may be irritating to the eyes and respiratory tract.
------------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL XL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 2 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
CARCINOGENICITY:
This product does not contain any substance(s) listed as a carcinogen by NTP, IARC, or OSHA.
ACUTE (SHORT TERM) FOR PRODUCT:
EYES: Causes severe irritation and possible burns.
SKIN: Causes skin irritation.
INHALATION: Inhalation of vapors or mists may cause pulmonary irritation, dizziness and nausea.
INGESTION: May be harmful if swallowed.
CHRONIC (LONG TERM) FOR PRODUCT OR COMPONENTS:
Prolonged or repeated breathing of sprays, mists, or dusts in excess of the suggested TLV may
cause nasal and respiratory irritations.
SECTION IV - FIRST AID MEASURES
IF IN EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician promptly if
irritation persists.
IF ON SKIN: Remove contaminated clothing and wash affected skin area with soap and water.
IF SWALLOWED: Call a physician promptly. INDUCE VOMITING at the direction of a physician or medical
personnel. Give large quantities of water. Never give anything orally to an unconscious or
convulsing person.
IF INHALED: Remove person to fresh air. If not breathing, apply artificial respiration. If breathing is difficult
give oxygen. Contact a physician promptly.
SECTION V - FIRE-FIGHTING MEASURES
Flammability Class IIIB
Flash Range: >210 F
Explosive Range: Not Applicable
EXTINGUISHING MEDIA:
Water spray, carbon dioxide, dry chemical, alcohol foam, or foam.
SPECIAL FIREFIGHTING PROCEDURES:
Fire fighters and others who may be exposed to products of combustion should wear full fire fighting
turn out gear and self contained breathing apparatus (pressure demand NIOSH approved or
equivalent). Fire equipment should be thoroughly decontaminated after use. Use water spray to
cool containers exposed to fire. DO NOT permit water to enter containers. Material may spatter or
foam if contacted with water. Use water spray to dilute vapors and wash them from air.
UNUSUAL FIRE & EXPLOSION HAZARDS:
When burned, hazardous products of combustion including oxides of nitrogen, carbon monoxide,
and carbon dioxide can occur. Heated material can form flammable and explosives with air. Avoid
breathing fumes from fire and exposed material. Never use welding or cutting torch on or near drum,
even empty, because product or residue can ignite explosively.
------------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL XL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 3 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
SECTION VI - ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
SMALL SPILLS: Use an inert material to absorb spilled product. Flush spill area with plenty of
water.
LARGE SPILLS: Over 50 gallons, use caution; spilled material may be extremely slippery. Contain
spilled material immediately and prevent from entering sewer or storm water systems. Use
an inert material to immobilize and absorb spilled material.
SECTION VII - HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Containers of this material may be hazardous when emptied. Since emptied containers retain
product residues (vapor, liquid, and/or solid), all hazard precautions given in this data sheet should
be observed.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
PROPRIETARY ALKYLALKANOLAMINE
N/est N/est N/est N/est N/est
SODIUM BORATE
1.00 mg/M3 5.00 mg/M3
N/est 6.00 ppm N/est
TRIAZINE
N/est N/est N/est N/est N/est
RESPIRATORY PROTECTION:
None normally required. However, if exposure to airborne concentrations exceeds occupational
exposure limits listed in SECTION II, use an appropriate NIOSH-approved respirator for organic
vapors and/or particulates in accordance with 29 CFR 1910.134. If exposures cannot be kept at a
minimum with engineering controls, consult respirator manufacturer to determine appropriate type of
respiratory equipment for given application.
VENTILATION:
Use adequate ventilation to keep airborne concentrations below the exposure standards listed in
SECTION II.
PROTECTIVE GLOVES:
Neoprene rubber gloves are recommended.
EYE PROTECTION:
Wear approved splashproof chemical goggles.
OTHER PROTECTIVE EQUIPMENT: None normally required.
------------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL XL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 4 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES
Form: LIQUID
Appearance/Color: BRIGHT GREEN
Odor: MILD
Solubility (in water): MISCIBLE
pH Value: 9.5 ?10.5
Boiling Range: (WATER) 212.F (100.C)
Vapor Pressure (mmHg): (WATER) 17.@ 68.F (20.C)
Vapor Density: Non Volatile
Specific Gravity: 1.043
VOC 17.8% by weight
Molecular Weight: MIXTURE
SECTION X - STABILITY AND REACTIVITY
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATABILITY:
Acids, strong oxidizing agents.
CONDITIONS TO AVOID:
Acids, strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Carbon monoxide, carbon dioxide, and oxides of nitrogen can be liberated at high temperatures.
SECTION XI - TOXICOLOGICAL INFORMATION
Lethal Dose Information (ppm)
PROPRIETARY ALKYLALKANOLAMINE
Eyes Rabbit, adult TDLo 0.
TDLo 0.856 mg/M3
Inhalation Rat, adult
Oral Rat, adult LD50 900. ppm
Skin Rabbit, adult LD50 1756. mg/kg
SODIUM BORATE
Oral Unknown LD50 3400. ppm
Skin Unknown LD50 2000. ppm
TRIAZINE
Oral Rat, adult LD50 1250. ppm
Skin Rat, adult LD50 2000. ppm
------------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 5 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
ADDITIONAL TOXICOLOGICAL DATA FOR PRODUCT AND/OR INGREDIENTS:
NONE KNOWN FOR PRODUCT
SECTION XII - ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION FOR PRODUCT AND/OR INGREDIENTS:
Aquatic toxicity data not available.
SECTION XIII - DISPOSAL CONSIDERATIONS
EPA Hazardous Waste Number NONE
WASTE DISPOSAL METHOD:
Waste product must be disposed of properly under Federal, State and Local regulations for
industrial waste. Incineration is the recommended method for disposal observing all Local, State
and Federal regulations. This product when spilled or disposed of is a non-hazardous waste as
defined in 40 CFR Part 261 of the RCRA regulations.
SECTION XIV - TRANSPORT INFORMATION
UN Number NONE
UN Pack Group NA
UN Class NA
ICAO/IATA Class NONE
DOT Hazard Class NOT HAZARDOUS
CANADIAN TDG/WHMIS INFORMATION:
PIN NUMBER: None
TDG: NA
TDG ACT CLASS: NA
WHMIS: D2B
OTHER NAMES: None
SECTION XV - REGULATORY INFORMATION
EEC Classification Irritant
This product is not regulated as a hazardous substance.
------------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: RONDA-COOL XL
MSDS Number: PTW.700050
Version Number 0009
MSDS Date: 01/23/07
Page Number: 6 of 6
------------------------------------------------------------------------------------------------------------------------------------------------
SECTION XVI - OTHER INFORMATION
ADDITIONAL PRECAUTIONS AND NOTES:
Do not dilute or mix with other materials unless advised by supplier.
PLEASE NOTE! This product contains alkanolamines. DO NOT ADD solutions containing NITRITES or
related NITROSATING agents to this material. Potential carcinogenic NITROSAMINES may be formed.
------------------------------------------------------------------------------------------------------------------------------------------------
Last Page
|