Page 1
MATERIAL SAFETY DATA SHEET Forms published by WindowChem (707)864-0845
Section 1. Chemical Product and Company Identification
Product Code
CW32 CW128
Product Name
Soluble Cutting Oil
Manufacturer's Name Emergency Telephone Number
Mark V Laboratory, Inc. CHEMTREC 800-424-9300
Address (Number, Street, City, State, and ZIP Code) Telephone Number For Information
18 Kripes Road (860) 653-7201
Date Prepared
Post Office Box 540 March 24, 2008
Signature of Preparer (optional)
East Granby, Connecticut 06026
Section 2. Composition / Information on Ingredients
Exposure Limits
CAS Registry # LD50 LC50
N/A
4719-04-4 Oral
Hexadydro 1,3,5-Tris (2-Hydroxyethyl S-Triazine
LD50=8.0gm
/kg
Triethanolamine 102-71-6 Oral LD50- N/A
8.0 Gm/kg
(rats)
Section 3. Hazards Identification
EMERGENCY OVERVIEW
POTENTIAL HEALTH EFFECTS:
EYE CONTACT :
Concentrate may cause eye irritation.
INHALATION :
TLV for product not established. Refer to Hazardous Materials List for ingredient TLV's
SKIN CONTACT :
Concentrate may cause skin irritation. No acute effects expected.
INGESTION :
Concentrate is not expected to be toxic. LD (Rat) is greater than 5.0 g/kg.
CHRONIC EFFECTS / CARCINOGENICITY:
A review of the literature does not show obvious long-term hazard. Threshold Limit Value
not established for this product. No known carcinogens.
TERATOLOGY (BIRTH DEFECT) INFORMATION :
REPRODUCTION INFORMATION :
Page 2
Product: Soluble Oil
Section 4. First Aid Measures
INHALATION :
If respiratory discomfort or irritation occurs, move to fresh air. See a physician if
discomfort or irritation continues.
EYE CONTACT :
Immediately flush eyes with plenty of water. Get medical attention if irritation
persists.
SKIN CONTACT :
Wash skin with soap and water. If irritation occurs, get medical attention. Wash
clothing before reuse.
INGESTION :
Call a physician immediately. Only induce vomiting at the instructions of a physician.
Never give anything by mouth to an unconscious person.
NOTE TO PHYSICIAN :
Section 5. Fire Fighting Measures
FLAMMABLE PROPERTIES:
FLASH POINT : METHOD USED :
N/A N/A
FLAMMABLE LIMITS
LFL : UFL:
N/A N/A
EXTINGUISHING MEDIA :
Water, Fog, Dry Chemical, Foam, or CO2
FIRE & EXPLOSION HAZARDS :
None
FIRE FIGHTING INSTRUCTIONS :
Wear self-contained breathing apparatus when in a confined space. Cool fire-exposed
containers with water spray to prevent rupture.
FIRE FIGHTING EQUIPMENT :
Section 6. Accidental Release Measures
Sweep into container and remove. Flush spill area with water.
Section 7. Handling and Storage
DO NOT ADD NITRATES TO THIS FLUID. Avoid contact with eyes. Avoid breathing mists. Do
not take internally. Keep container closed when not in use. Bring product to room
temperature before use. DO NOT CUT OR WELD EMPTY DRUMS UNLESS THOROUGHLY CLEANED!
Section 8. Exposure Controls / Personal Protection
ENGINEERING CONTROLS :
Good industrial hygiene practices recommend that engineering controls be used to reduce
environmental concentrations to the threshold limit value (TLV). If associated TLV is
exceeded, provide NIOSH approved respiratory protection.
RESPIRATORY PROTECTION :
SKIN PROTECTION :
Impervious gloves such as rubber should be used when handling this product.
Appropriate clothing to avoid skin contact.
EYE PROTECTION :
Safety glasses with side shield or chemical goggles. Eyewash facility.
EXPOSURE GUIDELINE (S) :
Page 3
Product: Soluble Oil
Section 9. Physical and chemical Properties
Mild Pleasant blue Liquid
APPEARANCE : PHYSICAL STATE :
100(212) Readily Emulsifies
BOILING POINT : SOLUBILITY IN WATER :
Equal to water 1.0
EVAPORATION RATE : SPECIFIC GRAVITY :
0 (32) N/A
FREEZING POINT : VAPOR DENSITY :
N/A N/A
MELTING POINT : VAPOR PRESSURE :
MOLECULAR WEIGHT : VISCOSITY :
Mild pleasant N/A
ODOR : % VOLATILE :
10.0 ?10.4
pH :
Section 10. Stability and Reactivity
CHEMICAL STABILITY :
Stable under normal conditions.
INCOMPATIBILITY :
Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS :
Carbon and Nitrogen Oxides.
HAZARDOUS POLYMERIZATION :
Will not occur.
Section 11. Toxicological Information
EYE :
SKIN :
INGESTION :
INHALATION :
SUBCHRONIC :
CHRONIC / CARCINOGENICITY :
TERATOLOGY :
REPRODUCTION :
MUTAGENICITY :
SENSITIZATION :
Section 12. Ecological Information
ECOTOXICOLOGICAL INFORMATION :
DISTRIBUTION :
CHEMICAL FATE INFORMATION :
Alkanolamine....................................In all metalworking fluids containing amines, there is a
potential for forming nitrosamines which are animal carcinogens. Therefore, no
Nitrites or related nitrosating agents should be added to such compositions.
Page 4
Product: Soluble Oil
Section 13. Disposal Considerations
Dispose of in accordance with local, state, and federal regulations. Disposal of this
material may be banned by federal law (40 CFR 268). This product does not fall under
current EPA RCRA definitions of hazardous waste.
Section 14. Transport Information (Not meant to be all inclusive)
Metal cutting, drawing, or drilling compound
D.O.T. SHIPPING NAME :
TECHNICAL SHIPPING NAME :
N/A
D.O.T. HAZARD CLASS :
N/A
U.N. / N.A. NUMBER :
PRODUCT RQ (LBS) :
D.O.T. LABEL :
D.O.T. PLACARD :
FREIGHT CLASS BULK :
FREIGHT CLASS PACKAGE :
PRODUCT LABEL :
Section 15. Regulatory Information (Not meant to be all inclusive - selected regulation represented)
OSHA STATUS :
CFR 1910.1200 Hazardous Chemical: NO
A mixture, is NOT listed in TSCA inventory. Ingredients are listed.
TSCA STATUS :
CERCLA REPORTABLE QUANTITY :
SARA TITLE III:
NO
SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES :
NO
SECTION 311/312 HAZARDOUS CATEGORIES :
NO
SECTION 313 TOXIC CHEMICALS :
RCRA STATUS :
CALIFORNIA PROPOSITION 65 :
Section 16. Other Information
MSDS STATUS:
Information presented herein has been compiled from information provided to us by our
suppliers and other sources considered to be dependable and is accurate and reliable to
the best of our knowledge and belief but is not guaranteed to be so. Nothing herein is
to be construed as recommending any practice or the use of any product in violation of
any patent or in violation of any law or regulation. It is the users' responsibility
to determine the suitability of any material for a specific purpose and to adopt such
safety precautions as may be necessary. We make no warranty as to the results to be
obtained in using any material and since conditions of use are not under our control,
we must necessarily disclaim all liability with respect to the use of any material
supplied by us.
|