Material Safety Data Sheet For Mist Coolant
(MC128, MC640)
Coilhose Pneumatics Inc.
19 Kimberly Road
East Brunswick, NJ 08816
Phone: 732-390-8480
REVISION DATE DATE ISSUED
05-06-98 01-01-05
IDENTIFICATION AND EMERGENCY INFORMATION
PRODUCT NAME: PRODUCT #:
Mist Coolant MC128, MC640
CHEMICAL NAME: CAS #'S:
N/A ?Mixture Mixture
PRODUCT APPEARANCE AND ODOR: CHEMICAL FAMILY:
Blue liquid, slight chemical odor --
SYNONYMS: EMERGENCY TELEPHONE:
Synthetic Coolant 1-908-862-9300
COMPONENTS AND HAZARD INFORMATION
COMPONENTS: W/W HAZARD DATA (TLV, LD50, LC50, ETC.):
Water n/e
CAS #: 7732-18-5
Triethanolamine TWA 5mg/meter cubed ACGIH
CAS #: 102-71-6
Organic Acid Phosphate n/e
CAS #: 68511-19-3
Carboxylic Acid Derivatives n/e
CAS #: n/e
Hexahydro-1,3,5-Tris n/e
(2-Hydroxyethyl) 璼璗riazine
CAS #: 4719-04-4
HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS):
Health Flammability Reactivity
1 0 0
TRANSPORTATION INFORMATION
TRANSPORTATION INCIDENT INFORMATION:
DOT: Not regulated.
Coilhose Pneumatics ?19 Kimberly Road, East Brunswick, NJ 08816 ?Phone 732-390-8480
1 of 1
Form #: MSDS-MC
EMERGENCY FIRST AID
EYE CONTACT: If splashed into the eyes, flush with clear water for 15 minutes or until irritation
subsides. If irritation persists, call a physician.
SKIN CONTACT: In case of skin contact, remove contaminated clothing and wash skin thoroughly with
soap and water.
INHALATION: For effects produced by overexposure, remove to fresh air. If effects persist, obtain
medical advice.
INGESTION: If ingested, call a physician immediately. Possible aspiration hazard.
FIRE AND EXPLOSION HAZARD INFORMATION
FLASH POINT (MINIMUM): AUTOIGNITION TEMPERATURE:
N/A N/A
NATIONAL FIRE PROTECTION ASSOCIATIOIN (NFPA) ?HAZARD IDENTIFICATION
Health Flammability Reactivity
1 0 0
FLAMMABLE OR EXPLOSIVE LIMITS (approximate percent by volume in air):
Estimated values: N/A
EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES:
Foam, water spray (fog), dry chemical, carbon dioxide extinguishing agents may all be suitable for
extinguishing fires involving this type product, depending on size or potential size of fire and
circumstances related to the situation. Plan fire protection and response strategy through consulation with
local fire protection authorities or appropriate specialists. Wear self contained breathing apparatus and full
turn out gear. Cool fire exposed containers with water spray. Dried material can burn.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
n/a
"EMPTY" CONTAINER WARNING:
Empty containers retain residue (liquid or vapor) and can be dangerous. DO NOT PRESSURIZE, WELD,
CUT, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME,
SPARKS, OR OTHER SOURCES OF IGNITION; THEY MAY EXPLODE AND CAUSE INJURY OR
DEATH. Do not attempt to clean since residue is difficult to remove. "Empty" drums should be
completely drained, properly bunged, and returned to a drum reconditioner. All other containers should be
disposed of in an environmentally safe manner and in accordance with government regulations.
HEALTH AND HAZARD INFORMATION
EXPOSURE LIMIT FOR TOTAL PRODUCT:
N/A
VARIABILITY AMONG INDIVIDUALS:
Health studies have shown that many petroleum hydrocarbons and synthetic lubricants pose potential
human health risks, which vary from person to person. As a precaution, exposure to liquids, vapors, mists,
or fumes should be minimized.
Coilhose Pneumatics ?19 Kimberly Road, East Brunswick, NJ 08816 ?Phone 732-390-8480
2 of 2
Form #: MSDS-MC
HEALTH AND HAZARD INFORMATION (continued)
EFFECTS OF OVEREXPOSURE (Signs and symptoms of exposure):
Prolonged or repeated skin contact with this product tends to remove skin oils possibly leading to irritation
and dermatitis. Product contacting the eye may cause irritation, prolonged contact may cause eye damage.
Under misting conditions, irritation of the nasal and respiratory tracts may occur. Product may be harmful
if ingested. DO NOT induce vomiting. Get immediate medical attention.
PHYSICAL DATA
The following data are approximate or typical values and should not be used for precise design purposes.
BOILING RANGE: VAPOR PRESSURE:
Wide range n/e
SPECIFIC GRAVITY (25癈 / 25癈): VAPOR DENSITY (AIR = 1):
(WATER = 1) n/e
> 1.0
MOLECULAR WEIGHT: PERCENT VOLATILE BY VOLUME:
Wide range > 50%
EVAPORATION RATE @ 1 ATM AND 25癈 SOLUBILITY IN WATER @ 1 ATM AND 25癈
(77?F) (n-BUTYL ACETATE = 1): (77癋):
> 1.0 Soluble
POUR, CONGEALING OR MELTING POINT: FREEZING POINT:
n/e n/e
REACTIVITY
This product is stable and will NOT react violently with water. Hazardous polymerization will not occur.
Avoid contact with strong oxidants such as liquid chlorine, concentrated oxygen, sodium hypochlorite or
calcium hypochlorite. Do NOT mix with nitrites due to the possible formation of nitrosamines.
DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS:
Fumes, smoke, carbon monoxide, and other decomposition products, in case of incomplete combustion.
CONDITIONS TO AVOID:
Open Flames.
TOXICITY
Medical Conditions Aggravated by Exposure: Unknown
This product does NOT contain any ingredients identified as carcinogenic by IARC, NTP, or OSHA.
SARA Section 313 Status: This material is not known to contain any
chemicals on the SARA Section 313 list at a
concentration greater than 1.0 percent or
carcinogenic chemical on that list at a
concentration greater that 0.1 percent.
Coilhose Pneumatics ?19 Kimberly Road, East Brunswick, NJ 08816 ?Phone 732-390-8480
3 of 3
Form #: MSDS-MC
SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Keep product out of sewers and watercourses by diking or impounding. Absorb with sand or inert
material. Sweep or scoop up and remove. Prevent spread of spill. Advise authorities if product has
entered or may enter sewers, watercourses or extensive land areas. Assure conformity with local
regulations.
WASTE DISPOSAL METHODS:
(Consult federal, state, or local authorities for proper disposal procedures.) Assure conformity with
applicable disposal regulations. Dispose of absorbed material at an approved waste site or facility.
PROTECTIONS AND PRECAUTIONS
VENTILATION:
(Always maintain below permissible exposure limits.) Use local exhaust to capture vapor, mist or fumes, if
necessary.
RESPIRATORY PROTECTION:
(Use only NIOSH approved equipment.) Normally not needed at ambient temperatures.
PROTECTIVE GLOVES:
Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin contact.
EYE PROTECTION:
Use splash goggles or face shield when eye contact may occur.
OTHER PROTECTIVE EQUIPMENT:
Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular
clothing, which could result in prolonged or repeated skin contact.
WORK PRACTICES/ENGINEERING CONTROLS:
Keep containers closed when not in use. Do not handle near heat, sparks, flame, or strong oxidants. DO
NOT MIX WITH NITRITES OR PRODUCTS WHICH CONTAIN NITRITES.
PERSONAL HYGIENE:
Minimize breathing vapor, mist, or fumes. Avoid prolonged or repeated contact with skin. Remove
contaminated clothing; launder or dry-clean before reuse. Remove contaminated shoes and thoroughly
clean before reuse. Cleanse skin thoroughly after contact, before breaks and meals, and at end of work
period. Product is readily removed from skin by waterless hand cleaners, followed by washing thoroughly
with soap and water.
PREPARED BY:
Total Fina Elf Lubricants USA, Inc.
5 North Stiles Street
Linden, NJ 07036
THE ABOVE INFORMATION IS ACCURATE TO THE BEST OF OUR KNOWLEDGE. HOWEVER,
SINCE DATA, SAFETY STANDARDS, AND GOVERNMENT REGULATIONS ARE SUBJECT TO
CHANGE AND THE CONDITIONS OF HANDLING AND USE, OR MISUSE BEYOND OUR CON-
TROL, SELLER MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO
THE COMPLETENESS OR CONTINUING ACCURACY OF THE INFORMATION CONTAINED
HEREIN AND DISCLAIMS ALL LIABILITY FOR RELIANCE THEREON. USER SHOULD SATISFY
HIMSELF THAT HE HAS ALL CURRENT DATA RELEVANT TO HIS PARTICULAR USE.
Coilhose Pneumatics ?19 Kimberly Road, East Brunswick, NJ 08816 ?Phone 732-390-8480
4 of 4
Form #: MSDS-MC
|