3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
Material Safety Data Sheet
Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use)
MANUFACTURER: 3M
DIVISION: Commercial Care Division
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/20/2005
Supercedes Date: 08/10/2005
Document Group: 18-9289-2
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
WATER 7732-18-5 > 99
POLYETHOXYLATED ALCOHOL - NJTSN #027586004-8002 Trade Secret <1
2-AMINOISOBUTANOL 124-68-5 < 0.5
ETHYLENE GLYCOL ETHYLHEXYL ETHER 1559-35-9 < 0.1
TRIMETHYL OCTADECYL AMMONIUM CHLORIDE 112-03-8 < 0.05
D-LIMONENE 5989-27-5 < 0.01
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Liquid
Odor, Color, Grade: Clear, pink with mild clean and fresh fragrance.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
_________________________________________________________________________________________________
Page 1 of 6
3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Skin Contact:
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
3.3 POTENTIAL ENVIRONMENTAL EFFECTS
A 3M Product Environmental Data Sheet (PED) is available.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give
anything by mouth to an unconscious person. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Not Applicable
Flash Point
Not Applicable
OSHA Flammability Classification:
5.2 EXTINGUISHING MEDIA
Material will not burn.
_________________________________________________________________________________________________
Page 2 of 6
3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Nonflammable.
Unusual Fire and Explosion Hazards: Not applicable. Material will not burn.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. Contain spill. For larger spills, cover drains and build dikes to
prevent entry into sewer systems or bodies of water. Dilute in a large excess of water. Carefully, and with stirring, add appropriate
dilute acid such as sulfamic acid or vinegar. Confirm neutrality. Working from around the edges of the spill inward, cover with
bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.
Collect as much of the spilled material as possible. Clean up residue with water. Place in a closed container approved for
transportation by appropriate authorities. Cover, but do not seal for 48 hours. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Keep out of the reach of children. Avoid breathing of vapors, mists or spray. Avoid eye contact with vapors, mists, or spray. Do not
eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. NOTE: The above precautionary
information presumes that this ready-to-use product has been diluted and dispensed from a TWIST 'n FILL(TM) Chemical Dispenser.
7.2 STORAGE
Store under normal warehouse conditions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use in a well-ventilated area.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields.
8.2.2 Skin Protection
Avoid prolonged or repeated skin contact. Gloves not normally required.
If prolonged or repeated skin contact is expected, select and use gloves and/or protective clothing to prevent skin contact based
on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate
compatible materials. Gloves made from the following material(s) are recommended: Butyl Rubber, Neoprene, Nitrile Rubber.
_________________________________________________________________________________________________
Page 3 of 6
3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray. Under normal use conditions, airborne exposures are not expected to be significant enough
to require respiratory protection.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Specific Physical Form:
Clear, pink with mild clean and fresh fragrance.
Odor, Color, Grade:
Liquid
General Physical Form:
Not Applicable
Flash Point
> 200 篎
Boiling point
<=27 [Ref Std: AIR=1]
Vapor Pressure
Approximately 1 [Ref Std: WATER=1]
Specific Gravity
Approximately 11
pH
Complete
Solubility in Water
< 0.1 % [Test Method: calculated per CARB title 2]
Volatile Organic Compounds
> 90 %
Percent volatile
Approximately < 250 g/l [Test Method: calculated per CARB title
VOC Less H2O & Exempt Solvents
2]
< 100 centipoise
Viscosity
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: None known
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous
decomposition products may occur as a result of oxidation, heating, or reaction with another material.
SECTION 11: TOXICOLOGICAL INFORMATION
_________________________________________________________________________________________________
Page 4 of 6
3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
A 3M Product Environmental Data Sheet (PED) is available.
Not determined.
CHEMICAL FATE INFORMATION
A 3M Product Environmental Data Sheet (PED) is available.
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Discharge spent solutions and small quantities of less than 5 gallons (20 liters) to a municipal or industrial
wastewater treatment system. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
STATE REGULATIONS
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.
The components of this product are listed on the Canadian Domestic Substances List.
INTERNATIONAL REGULATIONS
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
_________________________________________________________________________________________________
Page 5 of 6
3M MATERIAL SAFETY DATA SHEET 3M(TM) DOSE 'n FILL CLEANING SYSTEM, ALL PURPOSE CLEANER &
DEGREASER (Ready-to-Use) 10/20/2005
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 0 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Health: 2 Flammability: 0 Reactivity: 0 Protection: X - See PPE section.
Hazardous Material Identification System (HMIS? hazard ratings are designed to inform employees of chemical hazards in the workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency
situations. HMIS?ratings are to be used with a fully implemented HMIS?program. HMIS?is a registered mark of the National Paint and Coatings
Association (NPCA).
Revision Changes:
Section 3: Carcinogenicity heading was deleted.
Section 3: Carcinogenicity table was deleted.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
_________________________________________________________________________________________________
Page 6 of 6
|