ARMAKLEENTM Paint and Ink
Remover:
Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
ARMAKLEENTM Paint and Ink Remover: Part B
PRODUCT NAME:
SYNONYM(S): Not available.
PRODUCT PART
NUMBERS: Not available
PRODUCT USE: Water-based paint and ink remover that is one part of a two part coating
removal system. This is designed to remove paints or inks from aluminum
and steel. FOR COMMERCIAL USE ONLY.
24-HOUR EMERGENCY PHONE NUMBERS
These numbers are for MEDICAL: TRANSPORTATION (SPILL):
emergency use only. If
you desire non-emergency 1-800-752-7869 1-800-468-1760
product information,
please call a phone
number listed below.
MANUFACTURER: SUPPLIER:
The ArmaKleen Company Safety-Kleen Systems, Inc.
469 North Harrison Street 5400 Legacy Drive, Cluster II, Building 3
Princeton, NJ 08543 Plano, TX 75024
USA USA
(609) 683-5900 (800) 669-5740
TECHNICAL INFORMATION: 1-800-332-5424
SAFETY-KLEEN MSDS FORM NUMBER: 82977 ISSUE: January 1, 2008
THE ARMAKLEEN COMPANY MSDS NUMBER: 820
ORIGINAL ISSUE: January 1, 2008 SUPERSEDES: New
PREPARED BY: ArmaKleen MSDS Coordinator APPROVED BY: The ArmaKleen
Company
Issued 01/08; MSDS Form No. 82977 - Page 1 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
OSHA PEL ACGIH TLV?br>
WT% NAME SYNONYM CAS NO. TWA STEL TWA STEL
4-20 2-amino, 2-methyl NA 124-68-5 N. Av. N. Av. N. Av. N. Av.
propanol
1-2 1-octyl 2 pyrrolidone NA 2687-94-7 N. Av. N. Av. N. Av. N. Av.
0.1-1.0 Dodecyl Benzene NA 27176-87-0 N. Av. N. Av. N. Av. N. Av.
Sulfonic Acid
40 to 80 Water Water 7732-18-5 N. Av. N. Av. N. Av. N. Av.
N.Av. = Not Available
SECTION 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
APPEARANCE
Liquid, clear, light amber color, characteristic odor.
DANGER!
HEALTH HAZARDS
CORROSIVE TO THE EYES ANS SKIN.
LIQUID CAN CAUSE SEVERE BURNS TO THE EYES AND SKIN.
Vapors and mists may cause eye and respiratory tract irritation.
Harmful or fatal if swallowed.
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH HAZARDS
INHALATION High concentrations of vapor or mist may irritate the respiratory tract
(BREATHING): (nose, throat, and lungs).
EYES: Corrosive to the eyes. Causes severe burns to the eyes.
SKIN: Corrosive to the skin.
INGESTION
(SWALLOWING): Harmful or fatal if swallowed.
CARCINOGENICITY: None known
CHRONIC: None known.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None Known
Issued 01/08; MSDS Form No. 82977 - Page 2 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 4: FIRST AID MEASURES
EYES: Immediately flush eyes with a directed stream of water for at least 15 minutes, forcibly
holding eyelids apart to ensure complete irrigation of all eye and lid tissue. Remove
contact lenses, if present, after the first five minutes and continue rinsing the eye. Call a
physician or poison control center immediately.
SKIN: Immediately flush skin with plenty of water while removing contaminated clothing and
shoes. Wash clothing before reuse. If irritation occurs, get medical attention.
INHALATION: Move person to fresh air. If person is not breathing, call 911 or an ambulance,
and then give artificial respiration. If respiration stops have a trained person administer
artificial respiration. Call a physician or poison control center immediately.
INGESTION: Never give anything to an unconscious person. Call a physician or poison control
center immediately. Have person rinse mouth with water. If able to swallow, have the
person sip water if able to swallow. Do not induce vomiting.
NOTE TO PHYSICIAN: Possible mucosal damage may contraindicate the use of gastric
lavage.
For additional medical emergency information cal 1-800-468-1760.
SECTION 5: FIRE FIGHTING MEASURES
FLASH POINT: greater than 212篎 (100篊)
FLAMMABLE LIMITS IN AIR: Not applicable.
AUTOIGNITION
TEMPERATURE: Not applicable.
HAZARDOUS COMBUSTION Product itself does not burn, but may decompose upon
PRODUCTS: heating to produce carbon monoxide, carbon dioxide, sulfur
oxides, and nitrogen oxides.
CONDITIONS OF
FLAMMABILITY: Product will not burn.
EXTINGUISHING MEDIA: Not applicable.
FIRE FIGHTING Keep storage containers cool with water spray.
INSTRUCTIONS: A positive-pressure, self-contained breathing apparatus
(SCBA) and full-body protective equipment are required for
fire emergencies.
Issued 01/08; MSDS Form No. 82977 - Page 3 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
FIRE AND Heated containers may rupture. "Empty" containers may
EXPLOSION HAZARDS: retain residue and can be hazardous. Not sensitive to
mechanical impact or static discharge.
NFPA 704
HAZARD This information is intended solely for the use by individuals
IDENTIFICATION: trained in this system.
3
SECTION 6: ACCIDENTAL RELEASE MEASURES
May create slippery conditions when spilled. Contain spill and pump into marked containers for
disposal. Small spills may be soaked up with compatible adsorbent material and placed in
sealable containers for disposal. Make sure area is clean and slip-free before re-opening for
traffic.
Additionally, for large spills: Dike far ahead of liquid spill for collection and later disposal.
There may be additional regulatory reporting requirements associated with spills, leaks, or
releases of this product.
SECTION 7: HANDLING AND STORAGE
HANDLING: Use clean tools. Use only with adequate local exhaust ventilation. Avoid
generating vapors or mists. Do not breathe vapor or mist. Use in a well
ventilated area.
Avoid contact with eyes, skin, clothing, and shoes.
Wash thoroughly with soap and water after use.
Immediately remove any contaminated clothing, shoes, and protective
equipment. Wash before reuse.
Issued 01/08; MSDS Form No. 82977 - Page 4 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SHIPPING AND Keep container tightly closed when not in use and during transport.
STORING: Store containers in a cool, dry place. Do not store below 40癋Empty product
containers may retain product residue and can be hazardous.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING Provide general ventilation needed to maintain concentration of
CONTROLS: vapor or mist below applicable exposure limits. Where adequate general
ventilation is unavailable, use process enclosures, local exhaust ventilation, or
other engineering controls to control airborne levels.
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY A NIOSH approved respirator with an organic vapor cartridges and N95 filters
PROTECTION: may be permissible under certain circumstances where airborne
concentrations are expected to exceed exposure limits or when symptoms
have been observed that are indicative of overexposure.
EYE Use splash goggles and face shield when eye contact may occur.
PROTECTION:
SKIN Use chemical resistant apron, gloves, and other impervious clothing
PROTECTION: to avoid skin contact.
PERSONAL Use good personal hygiene. Wash thoroughly with soap and water after
HYGIENE: handling and before eating, drinking, or using tobacco products. Clean
affected clothing, shoes, and protective equipment before reuse. Discard
affected clothing, shoes, or protective equipment if they cannot be thoroughly
cleaned. Discard leather articles, such as shoes, saturated with the product.
OTHER Where spills and splashes are likely, facilities storing or using this product
PROTECTIVE should be equipped with an emergency eyewash and shower, both equipped
EQUIPMENT: with clean water, in the immediate work area.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE,
APPEARANCE, AND ODOR: Liquid, clear, light amber color, characteristic odor.
ODOR THRESHOLD: Not available.
MOLECULAR WEIGHT: Not applicable.
SPECIFIC GRAVITY: 1.020 (water = 1)
DENSITY: 8.50 LB/US gal (1020 g/L)
Issued 01/08; MSDS Form No. 82977 - Page 5 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
VAPOR DENSITY: less than 1 (air = 1)
VAPOR PRESSURE: 16.9 mm Hg at 68癋 (20癈)
VOC VAPOR PRESSURE: <0.1 mm Hg at 68癋 (20癈).
BOILING POINT: 214癋 (101癈)
FREEZING/MELTING POINT: 21癋 (-6癈)
pH: 12.4
EVAPORATION RATE: Less than 1 (butyl acetate = 1)
SOLUBILITY IN WATER: Complete.
FLASH POINT: Greater than 212癋 (100癈).
FLAMMABLE LIMITS IN AIR: Not applicable.
AUTOIGNITION TEMPERATURE: Not applicable.
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal temperatures and pressures.
INCOMPATIBILITY: Avoid acids, oxidizing agents, or reducing agents.
REACTIVITY: Polymerization is not known to occur under normal temperatures and
pressures. Not reactive with water.
HAZARDOUS
DECOMPOSITION None under normal temperatures and pressures. Combustion
PRODUCTS: may generate carbon oxides and other toxic gases.
SECTION 11: TOXICOLOGICAL INFORMATION
TOXICITY: No data available on formulated product.
Issued 01/08; MSDS Form No. 82977 - Page 6 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICITY: No data available.
OCTANOL/WATER
PARTITION COEFFICIENT: Not available.
VOLATILE ORGANIC
COMPOUNDS: 160g/l (1.33 lb. /gal).
SECTION 13: DISPOSAL CONSIDERATIONS
DISPOSAL: Dispose in accordance with federal, state, provincial, and local
regulations. Regulations may also apply to empty containers. The
responsibility for proper waste disposal lies with the owner of the
waste. Contact Safety-Kleen regarding recycling or proper disposal.
USEPA WASTE This product, if discarded, is not expected to be a characteristic or
CODE(S): listed hazardous waste. Processing, use, or contamination by the
user may change the waste code(s) applicable to the disposal of this
product.
SECTION 14: TRANSPORT INFORMATION
DOT: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains amines),
8, UN 3267, III.
TDG: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S. (contains amines),
8, UN 3267, III.
EMERGENCY RESPONSE Not applicable.
GUIDE NUMBER:
SECTION 15: REGULATORY INFORMATION
USA REGULATIONS
SARA SECTIONS No
302 AND 304:
SARA SECTIONS This product poses the following health hazards as defined in
Issued 01/08; MSDS Form No. 82977 - Page 7 of 8
ARMAKLEENTM Paint and Ink Remover: Part B
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
311 AND 312: 40 CFR Part 370 and is subject to the requirements of sections 311 and
312 of Title III of the Superfund Amendments and Reauthorization Act of
1986 (SARA):
Immediate (Acute) Health Hazard
SARA SECTION No
313:
CERCLA: YES Dodecylbenzenesulfonic acid ?1000 lb. RQ
TSCA: All the components of this product are listed on, are automatically
included as "naturally occurring substances" on, or are or exempted from
the requirement to be listed on, the TSCA Inventory.
CALIFORNIA No
PROP. 65:
STATE RIGHT TO KNOW:
2-Amino-2-methyl-1-propanol-MA, PA
Dodecylbenzenesulfonic acid-CA, MA, NJ, PA
CANADA WHMIS E
All the components of this product are listed on, or are automatically
included as "substances occurring in nature on", or are exempted from the
requirement to be listed on the Canadian Domestic Substances List
(DSL).
SECTION 16: OTHER INFORMATION
REVISION INFORMATION: New
LABEL/OTHER INFORMATION: Not available.
User assumes all risks incident to the use of this product. To the best of our knowledge, the information contained herein is accurate. However,
The ArmaKleen Company assumes no liability whatsoever for the accuracy or completeness of the information contained herein. No
representations or warranties, either express or implied, or merchantability, fitness for a particular purpose or of any other nature are made
hereunder with respect to information or the product to which information refers. The data contained on this sheet apply to the product as
supplied to the user.
?008 Printed in the USA.
Issued 01/08; MSDS Form No. 82977 - Page 8 of 8
|