Welcome to
Hastings Plastics
Material Safety Data Sheets
PHENOSET MICROBALLOONS 15-1-B (BJO-0930)
HOLLO MICROSOHERES 15-1-GM
RESIN TALC 15-1-TC
*Click on link to inquire more information on these items
PRODUCT DATA
HASTINGS MSDS 15-1-B
PLASTICS (BJO-
0930)Microballoons
COMPANY REVISED 08/29/03
1704 Colorado Ave. Santa Monica, CA 90404 310-829-3449 FAX 310-828-6820
REPLACES 03/30/01
15-1-B (BJO-0930)PHENOSET MICROBALLOONS
Back to Index
SECTION I - PRODUCT IDENTIFICATION
MANUFACTURER'S NAME - ASIA PACIFIC MICROSPHERES SDN. BHD.
DISTRIBUTOR'S NAME - HASTINGS PLASTICS COMPANY
PRODUCT INFO/SALES - (310) 829-3449
EMERGENCY PHONE NUMBER - 24 HOUR (800) 424-9300
PRODUCT NAME - Microballoons
CHEMICAL FAMILY - Phenolic Resin
PRODUCT CODE NUMBER - 15-1-B (BJO-0930) Microballoons
CHEMICAL NAME - Phenol form aldehyde resin
SYNONYMS - None
SECTION II - HAZARDOUS INGREDIENTS
COM PONENTS CAS # CONCENTRATION BY W EIGHT %
1)PHENOLIC RESIN 9003-35-4 100
(Phenol, polym er with form aldehyde)
PERMISSIBLE EXPOSURE LIMIT - None Established
HMIS CODE H=0 F=0 R=0 P=O NFPA CODE H=0 F=0 R=0 P=0
SECTION III - PHYSICAL DATA
APPEARANCE AND ODOR - Red brown powder, odorless
BOILING POINT ( 0F) - Does not boil
VAPOR PRESSURE (m m HG) - N/A.
VAPOR DENSITY (Air=1) - N/A. Heavier than air
SOLUBILITY IN W ATER - Not soluble
SELF-IGNITION TEMPERATURE - 500C ( ASTM D1929 )
MOLECULAR W EIGHT - >10,000
FREEZING POINT - N/A
MELTING POINT - Does not m elt
PERCENTAGE VOLATILE - (m axim um ) 4-- > water
RELATIVE DENSITY - 0.20 TO 0.80
SECTION IV - FIRE AND HAZARD EXPLOSION DATA
AUTOIGNITION TEMPERATURE - 160+/-5C (ASTM D 1929)
FLAMMABLE LIMITS - N/D
EXTINGUISHING MEDIA - Alcohol type or all purpose foam s for large fires. Carbon Dioxide or dry
chem ical m edia for sm aller fires.
EXTINGUISHING MEDIA TO AVOID - None
SPECIAL FIREFIGHTING PROCEDURES:
Do not direct a solid stream of water or foam into burning m olten m aterials; this m ay cause a splattering and
spread of fire. Use a self contained breathing apparatus and protective clothing.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
W ARNING! Avoid dispersion of dust to reduce potential dust ignition/explosion
15-1-B (BJO-0930) MICROBALLOONS MSDS PAGE 2 OF 5
Static charges can accum ulate during shipping, unloading, pouring and conveying. Avoid dispersion of dust in air. Avoid
spark and flam e under dust conditions. Keep containers closed. Use with adequate ventilation. Electrically bond and
ground all containers, equipm ent and personnel before transfer of use. W ear antistatic footwear. Avoid dispersion of dust
in air to reduce potential of dust ignition / explosions.
Form aldehyde and Phenol vapors m ay form under fire conditions.
SECTION V - HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE:
EYES: May cause irritation. Sym ptom s m ay include stinging with excess blinking and tear production.
SKIN: No evidence of harm ful effects from available inform ation.
INGESTION: No evidence of harm ful effects from available inform ation.
INHALATION: Short term harm ful effects are not expected from vapor generated at am bient tem perature.
EFFECTS OF REPEATED EXPOSURE:
This m aterial m ay contain trace am ounts (<0.001%) of free form aldehyde, which is listed by IARC, NTP and
OSHA as a carcinogen. There should be m inim al risk when adequate ventilation is used due to the very low
form aldehyde concentration.
MEDICAL CONDITIONS AGGRAVATED BY OVEREXPOSURE:
A knowledge of the available toxicology inform ation and of the physical and chem ical properties of the m aterial
suggest that overexposure is unlikely to aggravate existing m edical conditions.
ADDITIONAL TOXICITY INFORMATION:
Form aldehyde has been shown to cause cancer in laboratory anim als and m utations in a variety of in vitro test
system s, the significance of which to hum ans is unknown. Form aldehyde is listed by IARC, NTP, and OSHA as a
carcinogen.
OTHER HEALTH HAZARDS:
None currently known.
NOTES TO PHYSICIAN:
There is no specific antidote. Treatm ent of overexposure should be directed at the control of sym ptom s and the
clinical condition of the patient.
SECTION VI EM ERGENCY AND FIRST AID PROCEDURES
EYE CONTACT:
Im m ediately flush eyes with water and continue washing for several m inutes. Obtain m edical attention if irritation
persists.
SKIN CONTACT:
Rem ove contam inated clothing. W ash skin with soap and water. Obtain m edical attention if irritation
persists. W ash contam inated clothing before reuse.
INHALATION:
No em ergency care anticipated.
INGESTION:
No em ergency care anticipated.
SECTION VII - PERSONAL PROTECTION INFORM ATION
EYE PROTECTION:
W ear safety glasses or chem ical goggles to prevent eye contact.
15-1-B (BJO-0930) MICROBALLOONS MSDS PAGE 3 OF 5
HAND PROTECTION:
General working gloves are acceptable.
RESPIRATORY PROTECTION:
Dust respirator if dusting condition exists.
OTHER PROTECTIVE EQUIPMENT:
Eye bath and safety shower.
SECTION VIII - REACTIVITY DATA
STABILITY - Stable.
HAZARDOUS POLYMERIZATION: - W ill not occur.
CONDITIONS TO AVOID: - None known
INCOMPATIBILITY: - Strong oxidizing agents
- Strong acids
- Halogens
- Strong alkalies
- Acyl halides.
CONDITIONS TO AVOID: - None known
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS:
Burning or therm al decom position can produce the following com bustion or decom position products: Carbon
m onoxide and / or carbon dioxide, form aldehyde and phenol. Carbon m onoxide is highly toxic if inhaled; carbon
dioxide in sufficient concentrations can act as an asphyxiant.
SECTION IX - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Collect for disposal. W ear suitable protective equipm ent.
W ASTE DISPOSAL METHOD:
Landfill where perm itted under appropriate Federal, State, and Local regulations.
SECTION X - SPECIAL PRECAUTIONS AND STORAGE DATA
GENERAL PRECAUTIONS:
CAUTION! May undergo spontaneous sm ouldering if stored or heated in bulk above 35?C under conditions
allowing air ingress to the product. Store package m aterial in a cool well ventilated area. Do not store in sun. Do
not dry in package.
Microballoons will undergo oxidation at elevated tem peratures. Due to the m icroballoons' excellent insulating
characteristics, the internal tem perature of the m ass can increase to the point where spontaneous ignition and
sm ouldering can occur. The tem perature at which this occurs is a function of the geom etry and the am ount of
m aterial being heated. Com bustion appears as a soft glow sim ilar to burning charcoal.
STORAGE:
Keep containers closed. Store m aterial in single rows with an air gap between. Do not stack m aterial m ore than
two high.
VENTILATION:
Special, local ventilation is recom m ended in areas where containers are opened and their contents are discharged
or in any other areas where dusting conditions m ay develop.
DRYING INSTRUCTIONS:
To reduce the m oisture content of this product to less than 4%. Dry a two inch layer or less of the product at a
m axim um tem perature of 75?C for 24 hours. To prevent oven or product contam ination, the m etal drying tray
should be covered with a cloth that will allow the product m oisture to evaporate. W hile handling the Microballoons,
precaution should be taken to prevent dispensing of the m aterial in air to form dust. Any finely divided organic
m aterial dispersed in air can be ignited and under som e conditions develop into dust explosion.
15-1-B (BJO-0930) MICROBALLOONS MSDS PAGE 4 OF 5
SECTION XI - REGULATORY INFORM ATION
TRANSPORTATION
UN NUM BER ADR/RID : NOT RESTRICTED FOR TRANSPORTATION
IM C/ICAO :NOT RESTRICTED FOR TRANSPORTATION
M ONT-BLANC : NOT RESTRICTED FOR TRANSPORTATION
STATUS ON SUBSTANCE LIST:
The concentrations shown are m axim um of ceiling levels (weight%) to be used for calculations for regulations.
FEDERAL EPA:
COM PREHENSIVE ENVIRONM ENTAL RESPONSE COM PENSATION, and LIABILITY ACT of 1980 (CERCLA)
requires notification of the National Response Center of release of quantities of HAZARDOUS Substances equal
to or greater than the reportable quantities (RQ's) in 40 CFR 302.4.
Com ponents present in this product at a level which could require reporting under the statute are: NONE
SUPERFUND AM ENDM ENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III Requires em ergency
planning based on Threshold Planning Quantities (TPG's) and release reporting based on Reportable Quantities
(RQ's) in 40 CFR 355 (used for SARA 02,304,311 and 312).
Com ponents present in this product at a level which could require reporting under the statute are: NONE
SUPERFUND AM ENDM ENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III Requires subm ission
of annual reports of release of toxic chem icals that appear in 40 CFR 372 (for SARA 31 3). This inform ation m ust
be included in all MSDSs that are copied and distributed for this m aterial.
Com ponents in this product at a level which could require a reporting under the statute are: NONE
TOXIC SUBSTANCES CONTROL ACT (TSCA) STATUS:
The ingredients of this product are on the TSCA inventory.
SECTION XII - STATE RIGHT TO KNOW
CALIFORNIA PROPOSITION 65
This product contains trace quantities of form aldehyde, which the State of California has found to cause cancer.
MASSACHUSETTS RIGHT-TO-KNOW , SUBSTANCE LIST (MSL)
HAZARDOUS Substances and Extraordinarily HAZARDOUS Substances on the MSL m ust be identified when
present in products.
Com ponents present in this product at a level which could require reporting under the statute are:
EXTRAORDINARILY HAZARDOUS SUBSTANCES (=>0.0001% )
UPPER BOUND
CHEMICAL CAS NUMBER CONCENTRATION%
Phenol 108-95-2 0.01
Form aldehyde 50-00-0 0.001
PENNSYLVANIA RIGHT-TO-KNOW , HAZARDOUS SUBSTANCE LIST
HAZARDOUS Substances and Special HAZARDOUS Substances on the List m ust be identified when present in
products.
Com ponents present in this product at a level which could require reporting under the statute are:
SPECIAL HAZARDOUS SUBSTANCES (=>0.01% )
UPPER BOUND
CHEMICAL CAS NUMBER CONCENTRATION%
Phenol 108-95-2 0.01
CALIFORNIA SCAQMD RULE 443.1 VOC'S: NONE
OTHER REGULATORY INFORMATION: NONE
15-1-B (BJO-0930) MICROBALLOONS MSDS PAGE 5 OF 5
DISCLAIMER OF LIABILITY
As the conditions or m ethods of use are beyond our control, we do not assum e any
responsibility and expressly disclaim liability for any use of this m aterial.
Inform ation contained herein is believed to be true and accurate but all statem ents
are m ade without warranty, express or im plied, regarding the accuracy of the
inform ation, the hazards connected with the use of the m aterial or the results to be
obtained from the use thereof. It is the user's obligation to determ ine the
conditions of safe use and the suitability of the m aterial for the user's purpose.
Prepared By: Erik Ricci
Form # 170-21A Revised 01/05/01
PRODUCT DATA
HASTINGS MSDS 15-1-GM
PLASTICS GLASS MICROSPHERES
REVISED 03/05/02
COMPANY REPLACES 12/29/92
1704 Colorado Ave. Santa Monica, CA 90404 310-829-3449 FAX 310-828-6820
15-1-GM HOLLOW MICROSPHERES
Back to Index
SECTION I - PRODUCT IDENTIFICATION
MANUFACTURER'S NAME - PQ CORPORATION
PRODUCT INFO/SALES - (310) 829-3449
EMERGENCY PHONE NUMBER - 24 HOUR (800) 424-9300
PRODUCT NAME - 15-1-GM Glass Microspheres, Hollow Microspheres
CHEMICAL NAME - Silicic acid, sodium salt, boric acid, am orphous silicon dioxide.
TSCA CAS REGISTRY NUMBERS - This product is a m ixture under TSCA. CAS Nos. for identification
purposes: 1344-09-8; 7775-19-1; 7631-86-9
DOT HAZARD CLASS - NA
DOT SHIPPING NAME - NA
SECTION II - HAZARDOUS INGREDIENTS
COM PONENTS % OSHA PEL ACGIH TLV
1)Boron Oxide (B2O3) 15% 15 m g/m 3 10 m g/m 3
NOTE: This product is a sodium borosilicate which contains no free boron oxide per se. Toxicological test data and
industrial experience are consistent with the conclusion that it is appropriate to treat this m aterial as an inert or nuisance
dust.
SECTION III - PHYSICAL DATA
APPEARANCE AND ODOR - Dry, white, oderless powder.
SPECIFIC GRAVITY (H 20=1) - NA
SOLUBILITY IN W ATER - Negligible
BULK DENSITY - 0.12 g/cc
pH - NA
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT (癋) - Noncom bustible
STABILITY - Stable
INCOMPATIBILITY - None Known
CONDITIONS TO AVOID - None Known
HAZARDOUS DECOMPOSITION PRODUCTS - None
SPECIAL FIRE FIGHTING PROCEDURES:
None
SECTION V - HEALTH HAZARD DATA
EFFECTS OF OVEREXPOSURE:
EYES: Causes irritation.
SKIN: May cause dehydration and irritation.
INHALATION: Causes irritation to respiratory tract.
15-1-GM HOLLOW M ICROSPHERES M ATERIAL SAFETY DATA SHEET PAGE 2 OF 3
INGESTION: No known hazard.
CHRONIC HAZARDS: No known chronic hazards. Not listed by OSHA, NTP or IARC as a carcinogen.
SIGNS AND SYMPTOMS OF EXPOSURE:
Sneezing and dryness of m ucous m em branes (inhalation). Redness and tearing (eye exposure). Dryness, itching
or burning (skin exposure).
MEDICAL CONDITIONS AGGREVATED BY EXPOSURE:
Asthm a and lung diseases.
OTHER HEALTH HAZARDS:
None currently known.
SECTION VI - EM ERGENCY AND FIRST AID PROCEDURES
EYE CONTACT:
Flush thoroughly with water for 10 to 15 m inutes. Contact physician if irritation persists.
INHALATION:
If breathing difficulty develops, rem ove to fresh air. If breathing difficulty persists, contact physician.
SECTION VII - PERSONAL PROTECTION INFORM ATION
EYE PROTECTION:
W ear tight fitting goggles if high dust concentration exists. NIOSH recom m ends that contact lenses not be worn
when working with crystalline silica.
RESPIRATORY PROTECTION:
Use NIOSH-certified dust respirator where dust occurs. Observe OSHA regulations for respirator use
(29 CFR 1910.134).
GLOVES:
Cotton gloves are usually sufficient to protect hands from irritation arising from handling this product. If irritation
occurs, use rubber gloves.
OTHER:
Safety shower and eyewash fountain should be within direct access.
PERSONAL HYGIENE:
Avoid breathing dust. W ash thoroughly after handling.
ENGINEERING CONTROL:
Use with adequate ventilation.
SECTION VIII - REACTIVITY DATA
STABILITY - Feldspar is stable under ordinary conditions. W hen exposed to high
tem peratures, free quartz can change crystal structure to form tridym ite
(above 870癈) or crystobalite (1470癈) which have greater health hazards
than quartz.
HAZARDOUS POLYMERIZATION: - N/A
CONDITIONS TO AVOID: - None
INCOMPATIBILITY: - None
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS:
W ill not occur.
15-1-GM HOLLOW M ICROSPHERES M ATERIAL SAFETY DATA SHEET PAGE 3 OF 3
SECTION IX - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Clean up and collect, m inim izing dust. Do not exceed recom m ended PEL or TLV. Avoid breathing dust. W ear
approved respirator.
W ASTE DISPOSAL METHOD:
Follow Federal, State and Local regulations for solid waste disposal. Under RCRA (40 CFR Part 261) Feldspar is
not a hazardous waste.
SECTION X - SPECIAL PRECAUTIONS AND STORAGE DATA
None
SECTION XI - REGULATORY INFORM ATION
COMMUNITY RIGHT TO KNOW :
California's Proposition 65 lists crystalline silica as a carcinogen.
NPCA / CPMA: Health Flam m ability Reactivity Personal Protection
HMIS Ratings: 2 0 0 E
DISCLAIMER OF LIABILITY
As the conditions or m ethods of use are beyond our control, we do not assum e any
responsibility and expressly disclaim liability for any use of this m aterial.
Inform ation contained herein is believed to be true and accurate but all statem ents
are m ade without warranty, express or im plied, regarding the accuracy of the
inform ation, the hazards connected with the use of the m aterial or the results to be
obtained from the use thereof. It is the user's obligation to determ ine the
conditions of safe use and the suitability of the m aterial for the user's purpose.
Prepared By: Erik Ricci
Form # 170-21A Revised 03/05/02
PRODUCT DATA
HASTINGS MSDS 15-1-TC
PLASTICS RESIN TALC
REVISED 09/11/01
COMPANY REPLACES 08/10/87
1704 Colorado Ave. Santa Monica, CA 90404 310-829-3449 FAX 310-828-6820
15-1-TC RESIN TALC
Back to Index
SECTION I - PRODUCT IDENTIFICATION
MANUFACTURER'S NAME - K-T FELDSPAR CORPORATION
PRODUCT INFO/SALES - (310) 829-3449
EMERGENCY PHONE NUMBER - 24 HOUR (800) 424-9300
PRODUCT NAME - 15-1-TC Resin Talc
CHEMICAL FAMILY - Igneous Tectosilicate Rock, a Sodium Potassium Alum inum Silicate
CHEMICAL NAME - Feldspar
FORMULA - (Na,K,Ca)1-2 O-AI2O3 2-6SiO2; SiO2
CAS# - 68476-25-5
SECTION II - HAZARDOUS INGREDIENTS
COM PONENTS CAS # CONCENTRATION BY W EIGHT %
1)Free Silica (Quartz)* 14808-60-7 Typically 7-13%
* Feldspar, is an anhydrous, inorganic, naturally occuring igneous m ineral rock (sodium , potassium , calcium , alum inum
silicate) devoid of any asbestos m inerals or acicular particles. These products contain crystalline silica, as quartz up to
13% dry weight. It is non-flam m able and non-toxic and does not begin to fuse until 1950癋 (1066癈)
SECTION III - PHYSICAL DATA
APPEARANCE AND ODOR - Earthy odor when wet.
Raw Color: white to off-white granules and/or powder
BOILING POINT ( 0F) - N/A
VAPOR PRESSURE (m m HG) - N/A
VAPOR DENSITY (Air=1) - N/A
SPECIFIC GRAVITY (H 20=1) - 2.60 - 2.65
SOLUBILITY IN W ATER - Negligable
EVAPORATION RATE - N/A
MOLECULAR W EIGHT - N/A
FREEZING POINT - N/A
MELTING POINT - N/A
PERCENTAGE VOLATILE - Not Applicable
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Non-Flam m able
SECTION V - HEALTH HAZARD DATA
OSHA PEL: Respirable Crystalline Quartz (TW A-TLV) = 0.1 m g/m 3
ACGIH TLV: Respirable Crystalline Quartz (TW A-TLV) = 0.1 m g/m 3
Crystobalite & Tridym ite (TW A-TLV) = 0.05 m g/m 3
NIOSH TW A: Respirable Crystalline Quartz = 0.05 m g/m 3
ROUTES OF ENTRY:
Inhalation
15-1-TC RESIN TALC M ATERIAL SAFETY DATA SHEET PAGE 2 OF 3
HEALTH HAZARDS:
W ARNING! These feldspar products contain crystalline silica which m ay cause delayed respiratory disease
(silicosis) if inhaled over a prolonged period of tim e. Avoid breathing dust. Use NIOSH/MSHA approved respirator
where TLV for crystalline silica m ay be exceeded.
IARC MONOGRAPH VOLUME 68, 1997 concludes that there is sufficient evidence that inhaled crystalline silica causes
cancer in hum ans. IARC Classification: Group I
THE NTP in the Sixth Annual Report on Carcinogens, 1991, has added crystalline silica to its list of substances that are
"reasonably anticipated to be carcinogens".
SECTION VI - EM ERGENCY AND FIRST AID PROCEDURES
EYE CONTACT:
Flush thoroughly with water for 10 to 15 m inutes. Contact physician if irritation persists.
INHALATION:
If breathing difficulty develops, rem ove to fresh air. If breathing difficulty persists, contact physician.
SECTION VII - PERSONAL PROTECTION INFORM ATION
EYE PROTECTION:
W ear tight fitting goggles if high dust concentration exists. NIOSH recom m ends that contact lenses not be worn
when working with crystalline silica.
RESPIRATORY PROTECTION:
If dust concentrations exceed recom m ended PEL or TLV for short tim e durations, use NIOSH/MSHA approved
dust respirators. If spraying wet coatings, use NIOSH/MSHA dust/m ist respirators.
OTHER:
Dust exposure levels in excess of appropriate PEL or TLV should be reduced by feasible engineering and/or
adm inistrative controls.
It is recom m ended that the em ployer obtain a copy of the ASTM 1132 inform ation package, "Standard Practice of
Health Requirem ents Relating to Occupational Exposure to Quartz Dust".
Govornm ent regulations require that exposed personnel receive appropriate training in safe work habits when
working with crystalline silica where the potential exists for exceeding the PEL or TLV.
SPECIAL PRECAUTIONS:
Minim ize dust generation and exposure. Do not breath dust. TW A should not exceed TLV or PEL. ACGIH
recom m ends periodic physical exam inations for those em ployees who are exposed to respirable crystalline silica
levels greater than 50% of the TLV or PEL.
Manufacturers who crush or grind ceram ic bodies fired to high tem peratures should recognize possible presence of
tridym ite and/or crystobalite which have greater health hazards than quartz.
Feldspar is not hazardous under DOT regulations.
SECTION VIII - REACTIVITY DATA
STABILITY - Feldspar is stable under ordinary conditions. W hen exposed to high
tem peratures, free quartz can change crystal structure to form tridym ite
(above 870癈) or crystobalite (1470癈) which have greater health hazards
than quartz.
HAZARDOUS POLYMERIZATION: - N/A
CONDITIONS TO AVOID: - None
INCOMPATIBILITY: - None
HAZARDOUS COMBUSTION OR DECOMPOSITION PRODUCTS:
W ill not occur.
15-1-TC RESIN TALC M ATERIAL SAFETY DATA SHEET PAGE 3 OF 3
SECTION IX - SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Clean up and collect, m inim izing dust. Do not exceed recom m ended PEL or TLV. Avoid breathing dust. W ear
approved respirator.
W ASTE DISPOSAL METHOD:
Follow Federal, State and Local regulations for solid waste disposal. Under RCRA (40 CFR Part 261) Feldspar is
not a hazardous waste.
SECTION X - SPECIAL PRECAUTIONS AND STORAGE DATA
None
SECTION XI - REGULATORY INFORM ATION
COMMUNITY RIGHT TO KNOW :
California's Proposition 65 lists crystalline silica as a carcinogen.
NPCA / CPMA: Health Flam m ability Reactivity Personal Protection
HMIS Ratings: 2 0 0 E
DISCLAIMER OF LIABILITY
As the conditions or m ethods of use are beyond our control, we do not assum e any
responsibility and expressly disclaim liability for any use of this m aterial.
Inform ation contained herein is believed to be true and accurate but all statem ents
are m ade without warranty, express or im plied, regarding the accuracy of the
inform ation, the hazards connected with the use of the m aterial or the results to be
obtained from the use thereof. It is the user's obligation to determ ine the
conditions of safe use and the suitability of the m aterial for the user's purpose.
Prepared By: Erik Ricci
Form # 170-21A Revised 09/18/01
|