MATERIAL SAFETY DATA SHEET
EVERLUBE PRODUCTS
100 COOPER CIRCLE
PEACHTREE CITY, GA 30269, USA
(770)261-4800 (DURING WORKING HOURS)
CHEMTREC 1/800-424-9300
SECTION I
Everlube 620C
IDENTITY (AS USED ON LABEL): (PEV620C)
CHEMICAL NAMES AND SYNONYMS: Bonded Solid Film Lubricant
AS5272, Ty 1
Mil-L-46010, Ty 1
CHEMICAL FAMILY: Not applicable (10-004)
FORMULA: Complex mixture
DATE PREPARED: June 2, 2003
INFORMATION OR EMERGENCY PHONE NO.: 770-261-4800
PREPARED BY: CHEMICAL COMMUNICATIONS COORDINATOR
EVERLUBE PRODUCTS, 100 COOPER CIRCLE, PEACHTREE CITY, GA 30269
_____________________________________________________________________________
HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS)
HEALTH: 2
FLAMMABILITY: 3
REACTIVITY: 0
SPECIAL NOTICE: -
SECTION II - HAZARDOUS COMPONENTS CONCENTRATIONS
Molybdenum Disulfide (CAS #1317-33-5)
10 mg/m3 as Mo
ACGIH TLV:
10 mg/m3 as Mo (total dust as Mo)
OSHA PEL: 10-15%
Inorganic Antimony Compound (CAS #1309-64-4)*
0.5 mg/m3 as Sb
ACGIH TLV:
0.5 mg/m3 as Sb
OSHA PEL: 5-10%
Methyl Ethyl Ketone (CAS #78-93-3)*
ACGIH TLV: 200 ppm
OSHA PEL: 200 ppm
ACGIH STEL: 300 ppm 25-35%
Ethanol (CAS #64-17-5)
ACGIH TLV: 1000 ppm
OSHA PEL: 1000 ppm 25-35%
Residual Formaldehyde (CAS #50-00-0)
ACGIH TLV: 0.3 ppm (ceiling)
OSHA PEL: 0.75 ppm
OSHA STEL: 2.0 ppm <1%
Everlube 620C
Residual Phenol (CAS #108-95-2)
ACGIH TLV: 5 ppm (skin)
OSHA PEL: 5 ppm (skin) <1%
*This chemical is subject to the reporting requirements of Section 313
of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40CFR Part 372.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: Not available
Density (lb/gal): 9.1
Vapor Pressure (mm Hg.): Not available
Melting Point: Not available
Vapor Density (AIR=l): Not available
Evaporation Rate: Not available
(Butyl Acetate = l)
Solubility in Water: Slight
Appearance and Odor: Gray/black liquid, organic solvent odor
Volatile Organic Compound -
VOC (grams/liter): 632
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 24癋 (T.C.C.)
Flammable Limits:
LEL - Not determined for product
UEL - Not determined for product
Extinguishing Media: CO2, Foam, Dry Chemical or Halon
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus. Do not extinguish
with water.
Unusual Fire and Explosion Hazards:
This product is classified as an OSHA 1B flammable liquid.
SECTION V - REACTIVITY DATA
Stability: Stable
Conditions to Avoid: Open flame
Incompatibility (Materials to Avoid):
Strong oxidizing agents
Hazardous Decomposition Products:
Irritating and/or toxic fumes including Carbon, Sulfur and
Antimony Compounds may be released.
Hazardous Polymerization: None
Conditions to Avoid: None
Everlube 620C
SECTION VI - HEALTH HAZARD DATA
THRESHOLD LIMIT VALUE: Not determined for product, see Section II.
Route(s) of Entry:
Inhalation? Yes
Skin? Yes
Ingestion? Yes
TOXICITY (ACUTE AND CHRONIC):
Molybdenum compounds may cause temporary irritation to eyes and skin
CARCINOGENICITY: NTP-NO IARC-NO OSHA-NO
Antimony compounds in tests with lab animals has been reported to cause benign
and malignant lung tumors upon inhalation above the TLV.
CARCINOGENICITY: NTP-NO IARC-NO OSHA-NO
Methyl Ethyl Ketone (CAS# 78-93-3) may cause eye and skin irritation and
central nervous system effects.
CARCINOGENICITY: NTP-NO IARC-NO OSHA-NO
Ethanol (CAS #64-17-5) may cause severe eye irritation. Ethanol may cause
teratogenic effects, CNS depression, and gastrointestinal distress from oral
consumption by humans.
CARCINOGENICITY: NPT-NO IARC-NO OSHA-NO
Formaldehyde (CAS #50-00-0) may be highly irritating to skin, eyes, mucous
membranes, and may cause hypersensitivity leading to contact dermatitis.
CARCINOGENICITY: NTP-YES(R) IARC-YES (Group 2A) OSHA-YES
The oral LD50 of phenol (CAS #108-95-2) is 414 mg/kg and its inhalation LC50
(rat) is 316 mg/m3. Phenol is considered toxic when ingested. It is a severe
skin and eye irritant in rabbits.
CARCINOGENICITY: NTP-NO IARC-NO OSHA-NO
HEALTH HAZARDS:
Eyes - may cause irritation, redness, blurred vision.
Skin - prolonged contact may cause irritation, dermatitis.
Inhalation - may cause irritation, dizziness, nausea, fatigue, headache and
unconsciousness or asphyxiation.
Ingestion - may cause gastrointestinal irritation, nausea, vomiting, and
diarrhea.
EMERGENCY AND FIRST AID:
Eyes - Flush with large amounts of water for at least 15 minutes, get medical
attention.
Skin - Wash with soap and water.
Inhalation - Remove to fresh air. If breathing is impaired, get medical
attention.
Ingestion - Do not induce vomiting, keep warm, get medical attention
Everlube 620C
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To Be Taken in Case Material is Released or Spilled:
Clean spill with absorbent material
Eliminate ignition sources
Wear gloves, goggles, and NIOSH-approved respiratory protection equipment if
PEL(s) or TLV(s) are exceeded.
Waste Disposal Method:
Dispose of waste in accordance with current local, state, and federal laws
and regulations.
Precautions to be Taken in Handling and Storing:
Protect from physical damage. Store in a cool, dry,
ventilated area away from acids, alkalis and open flames.
Other Precautions:
None
SECTION VIII - CONTROL MEASURES
Respiratory Protection:
Use NIOSH-approved organic respirator if airborne concentrations exceed
assigned PEL(s) or TLV(s).
Ventilation:
Local Exhaust - Use to maintain levels below assigned PEL(S)
and TLV(S).
Mechanical - Use explosion-proof equipment.
Special: None
Other: None
Protective Gloves: Chemical resistant gloves
Eye Protection: Wear safety glasses or goggles
Other Protective Equipment or Practices:
None
DISCLAIMER
REASONABLE CARE HAS BEEN TAKEN IN THE PREPARATION OF THE INFORMATION
CONTAINED IN THIS MATERIAL SAFETY DATA SHEET AND THE INFORMATION PROVIDED
IS GIVEN IN GOOD FAITH. HOWEVER, EVERLUBE PRODUCTS ASSUMES NO
RESPONSIBILITY AS TO THE ACCURACY OR SUITABILITY OF SUCH INFORMATION AND
NO WARRANTY, EXPRESSED OR IMPLIED, IS MADE.
|