Page 1/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
1 Identification of substance:
?Product details:
?Trade name: DURLUX SATIN GLOSS WHITE PART A
?Article number: 384-001
?Application of the substance / the preparation .
?Manufacturer/Supplier: TAMBOUR LTD.
?Further information obtainable from: Health & Safety
2 Composition/Data on components:
?Chemical characterization
?Description: Mixture of substances listed below with nonhazardous additions.
?Dangerous components:
CAS: 108-65-6 2-methoxy-1-methylethyl acetate Xi; R 10-36 10-25%
EINECS: 203-603-9
CAS: 123-86-4 n-butyl acetate R 10-66-67 10-25%
EINECS: 204-658-1
CAS: 1330-20-7 xylene (mix) Xn; R 10-20/21-38 2.5-10%
EINECS: 215-535-7
CAS: 108-10-1 4-methylpentan-2-one Xn, F; R 11-20-36/37-66 2.5-10%
EINECS: 203-550-1
?Additional information For the wording of the listed risk phrases refer to section 16.
* 3 Hazard identification
?Hazard description:
F Highly flammable
?Information concerning to particular hazards to man and environment
The product has to be labelled due to the calculation procedure of the "General Classification guideline for
preparations of the EU" in the latest valid version.
R 11 Highly flammable.
Contains isocyanates. See information supplied by the manufacturer
?Classification system
The classification is according to the latest editions of the EU-lists, and extended by company and literature
data.
4 First aid measures
?After inhalation Supply fresh air; consult doctor in case of complaints.
?After skin contact Generally the product does not irritate the skin.
?After eye contact Rinse opened eye for several minutes under running water.
(Contd. on page 2)
GB
DR
Page 2/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
Trade name: DURLUX SATIN GLOSS WHITE PART A
(Contd. of page 1)
?After swallowing If symptoms persist consult doctor.
5 Fire fighting measures
?Suitable extinguishing agents CO2, sand, extinguishing powder. Do not use water.
?For safety reasons unsuitable extinguishing agents
Water.
Water with full jet.
?Protective equipment: No special measures required.
6 Accidental release measures
?Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
?Measures for environmental protection:
Prevent seepage into sewage system, workpits and cellars.
Do not allow to enter sewers/ surface or ground water.
?Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
* 7 Handling and storage
?Handling
?Information for safe handling: /
?Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
?Storage
?Requirements to be met by storerooms and receptacles: Store in a cool location.
?Information about storage in one common storage facility: Not required.
?Further information about storage conditions:
Keep receptacle tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
* 8 Exposure controls and personal protection gear
?Additional information about design of technical facilities: No further data; see item 7.
?Ingredients with limit values that require monitoring at the workplace:
108-65-6 2-methoxy-1-methylethyl acetate
OES Short-term value: 548 mg/m? 100 ppm
Long-term value: 274 mg/m? 50 ppm
New, IOELV, Sk
123-86-4 n-butyl acetate
OES Short-term value: 966 mg/m? 200 ppm
Long-term value: 724 mg/m? 150 ppm
1330-20-7 xylene (mix)
OES Short-term value: 662 mg/m? 150 ppm
Long-term value: 441 mg/m? 100 ppm
Sk
(Contd. on page 3)
GB
DR
Page 3/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
Trade name: DURLUX SATIN GLOSS WHITE PART A
(Contd. of page 2)
108-10-1 4-methylpentan-2-one
OES Short-term value: 416 mg/m? 100 ppm
Long-term value: 208 mg/m? 50 ppm
IOELV, Sk, Bmgv
?Additional information: The lists valid during the making were used as basis.
?Personal protective equipment
?General protective and hygienic measures Wash hands before breaks and at the end of work.
?Respiratory protection: Not required.
?Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
?Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
?Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
?Eye protection:
Tightly sealed goggles.
9 Physical and chemical properties:
?General Information
Fluid
Form:
According to product specification
Colour:
Characteristic
Odour:
?Change in condition
Melting point/Melting range: undetermined
Boiling point/Boiling range: 114癈
21癈
?Flash point:
315.0癈
?Ignition temperature:
Product is not selfigniting.
?Self-igniting:
Product is not explosive. However, formation of explosive air/vapour
?Danger of explosion:
mixtures are possible.
?Explosion limits:
1.5 Vol %
Lower:
10.8 Vol %
Upper:
10.7 hPa
?Vapour pressure at 20癈:
Not determined
?Density:
?Solubility in / Miscibility with
Not miscible or difficult to mix
Water:
?Solvent content:
39.4 %
Organic solvents:
(Contd. on page 4)
GB
DR
Page 4/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
10 Stability and reactivity
?Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
?Dangerous reactions No dangerous reactions known
?Dangerous decomposition products: No dangerous decomposition products known
11 Toxicological information
?Acute toxicity:
?Primary irritant effect:
?on the skin: No irritant effect.
?on the eye: No irritating effect.
?Sensitization: No sensitizing effects known.
* 12 Ecological information:
?General notes:
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
13 Disposal considerations
?Product:
?Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
?Uncleaned packaging:
?Recommendation: Disposal must be made according to official regulations.
* 14 Transport information
?Land transport ADR/RID (cross-border)
3 Flammable liquids.
?ADR/RID class:
?Danger code (Kemler): 33
1263
?UN-Number:
II
?Packaging group:
3
?Hazard label
?Description of goods: 1263 PAINT (vapor pressure at 50癈 at most 110 kPa)
(Contd. on page 5)
GB
DR
Page 5/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
Trade name: DURLUX SATIN GLOSS WHITE PART A
(Contd. of page 4)
?Maritime transport IMDG:
3
?IMDG Class:
1263
?UN Number:
3
?Label
II
?Packaging group:
F-E,S-E
?EMS Number:
No
?Marine pollutant:
?Proper shipping name: PAINT
?Air transport ICAO-TI and IATA-DGR:
* 15 Regulations
?Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials
?Code letter and hazard designation of product:
F Highly flammable
?Risk phrases:
11 Highly flammable.
?Safety phrases:
9 Keep container in a well-ventilated place.
16 Keep away from sources of ignition - No smoking.
25 Avoid contact with eyes.
33 Take precautionary measures against static discharges.
51 Use only in well-ventilated areas.
60 This material and its container must be disposed of as hazardous waste.
?Special labelling of certain preparations:
Contains isocyanates. See information supplied by the manufacturer
Contains 4-isocyanatosulphonyltoluene. May produce an allergic reaction.
?National regulations
?Technical instructions (air):
Class Share in %
I 0.5
NK 39.4
?Waterhazard class: Water hazard class 2 (Self-assessment): hazardous for water.
16 Other information:
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
?Relevant R-phrases
10 Flammable.
(Contd. on page 6)
GB
DR
Page 6/6
Material Safety Data Sheet
According to 91/155 EEC
Printing date 09.01.2005 Reviewed on 09.01.2005
Trade name: DURLUX SATIN GLOSS WHITE PART A
(Contd. of page 5)
11 Highly flammable.
20 Harmful by inhalation.
20/21 Harmful by inhalation and in contact with skin.
36 Irritating to eyes.
36/37 Irritating to eyes and respiratory system.
38 Irritating to skin.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
?Department issuing MSDS: Tambour Ltd.- Health & Safety Department.
?Contact:
Haim Yahav
Phone: +972(4)987-7483
Fax: +972(4)985-3540
e-mail: h.yahav@tambour.co.il
?* Data compared to the previous version altered.
GB