MATERIAL SAFETY DATA SHEET PAGE 1 OF 5
VALVTECT A DIVISION OF EMERGENCIES
KOP-COAT, INC. HEALTH/SPILLS......: 800-548-0489
3400 DUNDEE ROAD CHEMTREC ASSISTANCE: 800-424-9300
NORTHBROOK CHEMTREC OUTSIDE US: 703-527-3887
IL 60062 CANUTEC............: 613-996-6666
VALVTECT A DIVISION OF
PRODUCT INFORMATION: 847-272-2278
OUTSIDE USA........: 847-272-2278
--------------------------------------------------------------------------------
1 PRODUCT IDENTIFICATION
--------------------------------------------------------------------------------
PRODUCT NAME: Marine Motor DeCarb
PRODUCT USE.: Fuel additive
APPEARANCE..: Clear liquid which may contain a colorant
CAS NUMBER..: Mixture
SYNONYMS....: None REVISION...: 1
DATE.......: 3/30/05
MSDS NUMBER: MMTS13
HMIS HEALTH RATING....: 2 NFPA HEALTH RATING....: 2
HMIS FLAMMABLE RATING.: 2 NFPA FLAMMABLE RATING.: 2
HMIS REACTIVITY RATING: 0 NFPA REACTIVITY RATING: 0
HMIS PERSONAL PROTECT.: B
--------------------------------------------------------------------------------
2 HAZARDOUS INGREDIENTS
--------------------------------------------------------------------------------
HAZARDOUS COMPONENT REG AGENCY PPM NOTES MG/M3 NOTES
Methyl isobutyl carbinol ACGIH STEL 40 167
(skin) ACGIH-TWA 25 104
CAS NUMBER:108-11-2 NIOSH 25 100
PERCENT BY WGT: 1 TO 5 NIOSH STEL 40 165
OSHA STEL 40 165
OSHA TWA 25 100
Ethylene glycol monobutyl ACGIH-TWA 25 121
ether (skin) NIOSH 25 120
CAS NUMBER:111-76-2 OSHA TWA 25 120
PERCENT BY WGT: 5 TO 10
Oleic acid (None established.)
CAS NUMBER:112-80-1
PERCENT BY WGT: 5 TO 10
Ammonium hydroxide (None established.)
CAS NUMBER:1336-21-6
PRODUCT NAME: Marine Motor DeCarb PAGE 2 OF 5
--------------------------------------------------------------------------------
2 HAZARDOUS INGREDIENTS
--------------------------------------------------------------------------------
HAZARDOUS COMPONENT REG AGENCY PPM NOTES MG/M3 NOTES
PERCENT BY WGT: 1 TO 5
Petroleum Distillates OSHA PEL 100 -
CAS NUMBER:64742-94-5
PERCENT BY WGT: 15 TO 20
Petroleum distillates OSHA-PEL 100 -
CAS NUMBER:64742-95-6
PERCENT BY WGT: 25 TO 30
--------------------------------------------------------------------------------
3 HAZARDS IDENTIFICATION
--------------------------------------------------------------------------------
EMERGENCY OVERVIEW: Combustible liquid and vapor. Harmful or fatal if
swallowed, can enter lungs and cause damage.
EYES: May cause moderate to severe eye irritation. Not expected to cause
permanent damage if promptly rinsed from eyes.
SKIN: May cause skin irritation. Prolonged and/or repeated contact with the
skin may cause irritation characterized by redness, cracking and blistering.
May be absorbed in toxic amounts through the skin and cause systemic effects.
INHALATION: Inhalation of high concentrations of vapors may cause respiratory
tract irritation and central nervous system depression. Symtoms include
headache, weakness, dizziness, nausea and loss of coordination. Continued
inhalation may result in unconsciousness or death. Reports have associated
repeated and prolonged overexposure to solvents with permanent brain, nervous
system, liver and kidney damage or may cause cardiac arrhythmia.
INGESTION: Swallowing small amounts during normal handling is not likely to
cause adverse effects. Swallowing larger amounts may cause gastrointestinal
disturbances such as nausea, vomiting, and diarrhea. Aspiration of this product
into the lungs may cause chemical pneumonitis, which can be fatal.
Individuals with pre-existing disease in or a history of ailments involving the
skin, eyes, respiratory tract, liver, kidney, or central nervous system are at a
greater than normal risk of developing adverse effects when exposed to this
material.
Animal studies conducted with 2-butoxyethanol indicate that exposure may cause
red blood cell damage, and damage to the kidneys and liver. These effects have
not been observed in humans.
--------------------------------------------------------------------------------
4 FIRST AID MEASURES
--------------------------------------------------------------------------------
PRODUCT NAME: Marine Motor DeCarb PAGE 3 OF 5
--------------------------------------------------------------------------------
4 FIRST AID MEASURES
--------------------------------------------------------------------------------
EYE CONTACT: Immediately flush the eyes with lukewarm, gently flowing water for
at least 20 minutes, while holding the eyelids open. Take care not to rinse
contaminated water into the unaffected eye or face. Remove contact lenses,
if present, after the first five minutes, then continue rinsing eye. Call a
poison control center or doctor for treatment advice.
SKIN CONTACT: Wash affected areas immediately with non-abrasive soap and
lukewarm water for 15-20 minutes. Under running water, remove contaminated
clothing, shoes, and leather goods (i.e. watchbands, belts). Call a poison
control center or doctor for treatment advice. Completely decontaminate
clothing, shoes and leather goods before reuse or discard.
INHALATION: Remove source of contamination or move victim to fresh air. If
breathing is difficult, oxygen may be beneficial if administered by trained
personnel, preferably on a doctor's advice. DO NOT allow victim to move about
unnecessarily. Symptoms of pulmonary edema may be delayed up to 48 hours after
exposure. Call a poison control center or doctor for treatment advice.
INGESTION: Call a poison control center or doctor immediately for treatment
advice. Have person rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.
Have person drink 8-10 oz (240-300 mL) of water to dilute material in stomach.
If milk is available, it may be administered AFTER the water has been given.
If vomiting occurs naturally, have victim lean forward to reduce risk of
aspiration. Repeat administration of water. Quickly transport person to
emergency care facility.
NOTE TO PHYSICIAN: Pulmonary aspiration hazard if swallowed. Treat
symptomatically.
--------------------------------------------------------------------------------
5 FIRE FIGHTING MEASURES
--------------------------------------------------------------------------------
FLASH POINT: 135 F/ 58 C
AUTOIGNITION TEMPERATURE: Not determined.
FLAMMABLE LIMITS (% by volume/air)
Lower Limit: Not determined.
Upper Limit: Not determined.
EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide, or foam.
FIRE FIGHTING PROCEDURES: As in any fire, wear complete fire service protective
equipment, including full-face MSHA/NIOSH approved or equivalent self-contained
breathing apparatus. Use water to cool fire-exposed container/structure/protect
personnel. Do not put in contact with oxidizing or caustic materials.
FIRE AND EXPLOSION HAZARDS: None known.
--------------------------------------------------------------------------------
6 SPILL AND LEAK PROCEDURES
--------------------------------------------------------------------------------
PRODUCT NAME: Marine Motor DeCarb PAGE 4 OF 5
--------------------------------------------------------------------------------
6 SPILL AND LEAK PROCEDURES
--------------------------------------------------------------------------------
SMALL SPILL: Stop the flow of material. Absorb with non-flammable suitable
absorbent such as sand or earth. Scoop/shovel absorbed material into container.
LARGE SPILL: Dike and contain spill. Pump to storage or salvage vessels.
Contain run-off from fire control and dilution water. Prevent run-off to
sewers, streams or other bodies of water. If run-off occurs, notify proper
authorities that a spill has occurred. Eliminate ALL sources of ignition.
Ventilate area.
--------------------------------------------------------------------------------
7 HANDLING AND STORAGE
--------------------------------------------------------------------------------
Handling Procedures: Avoid prolonged or repeated skin contact with this
material. Avoid eye contact with this material. Avoid prolonged or repeated
breathing of this material. Observe good personal hygiene practices and
recommended procedures. Wash thoroughly after handling. Use this product with
adequate ventilation.
Storage Procedures: Do not store near heat, sparks, open flame or strong
oxidizing agents. Do not store this material in open, unlabeled containers.
Keep in a closed, labeled container within a cool (well-shaded), dry, ventilated
area. Protect from physical damage. Empty containers retain product residue
(liquid or vapor) and can be dangerous. Do not pressurize, cut, weld, braze,
solder, drill, grind or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition; they may explode. Follow appropriate
grounding procedures, as applicable.
--------------------------------------------------------------------------------
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------------
ENGINEERING CONTROLS: Provide sufficient general / local exhaust ventilation in
pattern/volume to control inhalation exposures below current exposure limits and
below flammable vapor concentrations. Ventilation rates should be matched to
use conditions. Supplementary local exhaust ventilation may be needed in poorly
ventilated spaces, during spraying, heating or other non-routine activities.
PERSONAL PROTECTIVE EQUIPMENT:
EYE PROTECTION: Industrial safety glasses, side shields, and as neccesary,
faceshield.
HAND/SKIN PROTECTION: As required, chemical resistant, flexible-type gloves
(neoprene, nitrile or equal) to prevent contact. Gloves should be rinsed and
removed immediately after use. Wash hands after removing gloves. Wear chemical
resistant garments if contact is unavoidable.
RESPIRATORY PROTECTION: Respiratory protection may be necessary under certain
use conditions. A NIOSH-approved respirator should be selected on the basis of
PRODUCT NAME: Marine Motor DeCarb PAGE 5 OF 5
--------------------------------------------------------------------------------
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------------
the form and concentration of the contaminant.
OTHER: Facilities utilizing this material should be equipped with an eyewash
station and safety shower. Thoroughly clean shoes and wash contaminated clothes
before reuse.
--------------------------------------------------------------------------------
9 PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------------
Weight Per Gallon (lbs): 7.673 % VOL by Weight.: Not determined
Vapor Density.: >1 (Air=1) Boiling Point...: 212 F
Vapor Pressure: Not determined Evaporation Rate: Not determined
pH............: Not determined Specific Gravity: 0.92
Solubility In Water: Insoluble Viscosity.......: Not determined
VOC Content................: Not determined
--------------------------------------------------------------------------------
10 STABILITY AND REACTIVITY DATA
--------------------------------------------------------------------------------
STABILITY: Stable
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.
INCOMPATIBILITY: Strong oxidizers and reducers.
HAZARDOUS DECOMPOSITION PRODUCT(S): Carbon dioxide, carbon monoxide, oxides of
nitrogen, and other toxic organic compounds.
--------------------------------------------------------------------------------
11 TOXICOLOGICAL INFORMATION
--------------------------------------------------------------------------------
No data available on the product as a whole.
Repeated or prolonged overexposure to naphtha (solvent) has been reported to
cause nervous system damage.
--------------------------------------------------------------------------------
12 ECOLOGICAL INFORMATION
--------------------------------------------------------------------------------
Product has not been tested for ecotoxicity.
--------------------------------------------------------------------------------
13 DISPOSAL CONSIDERATIONS
--------------------------------------------------------------------------------
Dispose of in accordance with local, state and federal regulations.
--------------------------------------------------------------------------------
14 TRANSPORTATION INFORMATION
--------------------------------------------------------------------------------
PRODUCT NAME: Marine Motor DeCarb PAGE 6 OF 5
--------------------------------------------------------------------------------
14 TRANSPORTATION INFORMATION
--------------------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION REPORTABLE QUANTITIES
REPORTABLE QTY (LBS) HAZARDOUS SUBSTANCE
1000 Ammonium hydroxide
DOT SHIPPING INFORMATION FOR GROUND TRANSPORTATION ONLY:
DOT PROPER SHIPPING NAME: Combustible liquid, n.o.s. (contains petroleum
distillates)
DOT HAZARD CLASS: 3
PACKING GROUP III
DOT IDENTIFICATION NUMBER: UN1993
DOT SHIPPING INFORMATION FOR AIR TRANSPORTATION (IATA):
DOT PROPER SHIPPING NAME: Flammable liquid, n.o.s. (contains petroleum
distillates)
DOT HAZARD CLASS: 3
PACKING GROUP: III
DOT IDENTIFICATION NUMBER: UN1993
--------------------------------------------------------------------------------
15 REGULATORY INFORMATION
--------------------------------------------------------------------------------
SARA TITLE III SECTION 313 CHEMICALS
Ethylene glycol monobutyl ether (skin)
No additional information available.
--------------------------------------------------------------------------------
16 OTHER INFORMATION
--------------------------------------------------------------------------------
NOTICE: This document is generated for the purpose of distributing health,
safety and environmental data. The information on this MSDS was obtained from
sources which we believe are reliable. However, the information is provided
without any warranty, expressed or Implied, regarding correctness. Some
information presented and conclusions drawn herein are from sources other than
direct test data on the substance itself. Kop-Coat makes no warranty with
respect thereto and disclaims all liability from reliance thereon.
PREPARED BY: Manager of Health, Safety and Environmental Affairs.
|