MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: 4036 Page 1 of 5
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Blue Part B (Resin)
Manufactured by: RPM Technology, LLC
P.O. Box 33186
Reno, NV 89533
775-473-8706
Distributed by: Blueline Technologies, LLC
265 Burns Drive
Yuba City, CA 95991
530-671-5060
FOR CHEMICAL Spill, leak, fire, exposure, or accident, call CHEMTREC day or night
EMERGENCY Domestic North America 800.424.9300 International 703.527.3887
TSCA Inventory: All components of this product are included, or are exempt from inclusion, in the EPA Toxic
Substance Control Act (TSCA) Chemical Substance Inventory.
Canadian DSL: All components of this product are included, or are exempt from inclusion, in the Canadian
Domestic Substance List (DSL).
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components CAS# ACGIH TLV OSHA PEL % by Wgt
Polyoxyalkyleneamine 904-610-0 Not Determined Not Determined
N,N-Dialkyamino-diphenylmethane 528 5-60-9 Not Determined Not Determined
Propylene Carbonate 108-32-7 Not Determined Not Determined
Gamma-Glycidoxypropyltrimethylsiloxane 253 0-83-8 Not Determined Not Determined
Pigment Dispersion N/A Not Determined 10mg/m3
Alkali-aluminosilcate N/A 10mg/m3 6.0mg/m3
Castor Oil 8001-79-4 Not Determined Not Determined
3. HAZARDS IDENTIFICATION
Emergency Overview:
Routes of Entry: Route Entry Risk
Inhalation Possible
Ingestion Possible
Skin Contact Possible
Eye Contact Possible
Potential Health Effects: Inhalation May cause nausea and respiratory tract irritation. May cause
respiratory sensitization in susceptible individuals.
Ingestion Moderately toxic, cause abdominal cramps, nausea, swelling.
Skin Contact Product is a slight skin irritant. May Cause swelling and redness.
Eye Contact Mild eye irritant. Vapors slightly uncomfortable. Splashes irritating and
painful.
Acute Health Hazards: Acute ingestion causes burning of the mouth, throat, and stomach with abdominal pain. Acute
inhalation of vapors and mist can cause nasal discharge and pain in the eyes.
Chronic Health Hazards: If misted or at high concentrations, may cause pallor, nausea, anesthetic or narcotic effects.
Medical Conditions Skin and eye sensitization. Depending on individual skin sensitivity, chronic or
Generally Aggravated by prolonged exposure may result in irritation, blistering, burning and peeling of skin
Exposure: layers.
Carcinogenicity: OSHA: No data ACGIH: No data NTP: No data IARC: No data
Other:
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 2 of 5
4. FIRST AID MEASURES
Eye Contact: Immediately flush with plenty of water for at least 15 minutes. If redness, itching, or a burning
sensation develops, seek medical attention.
Skin Contact: Remove from skin immediately. Rinse with clean water for 20-30 minutes. Use soapy water if
needed. If redness, itching, or a burning sensation develops, seek medical attention.
Ingestion: Do NOT induce vomiting! Dilute with water and seek medical attention immediately.
Inhalation: Move victim to fresh air immediately. Give oxygen and seek medical attention.
5. FIRE FIGHTING MEASURES
Flammable Limits: Class IIIB
Flash Point, (Method Used): >200?Fahrenheit (Pensky-Marten Closed)
Auto Ignition Temperature: No Data
NFPA Hazard Rating: Health: 2 Hazard Scale Protective Equipment
Flammability: 1 0=LEAST A=SAFETY GLASSES
Reactivity: 0 1 =SLIGHT B=SAFETY GLASSES, GLOVES
Other: B 2= MODERATE C=SAFETY GLASSES, GLOVES AND APRON
3=HIGH
4=EXTREME
HMIS Hazard Rating: Health: 3
Flammability: 1
Reactivity: 0
Protection: B
Extinguishing Media: Foam/Carbon dioxide/Dry chemical/Water fog
Special Fire Fighting Remove all ignition sources. Wear self-contained breathing apparatus and complete personal
Procedures: protective equipment when entering confined areas where potential for exposure to vapors or
products exist.
Unusual Fire and Closed containers may rupture due to build-up of pressure when exposed to extreme heat.
Explosion Hazards:
Hazardous Decomposition
Products: Carbon dioxide, carbon monoxide, nitrogen oxides.
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Standard hydrocarbon spill procedures apply to this product
7. HANDLING AND STORAGE
Handling & Storage Prevent all skin and eye contact. Avoid breathing vapors. Re-seal partially used
Precautions: containers. Wash with soap and water before eating or drinking. Protect from moisture
contamination. Exothermic generation of carbon dioxide may cause dangerous pressure.
Keep away from all ignitable sources as well as extreme heat.
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 3 of 5
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation: Adequate ventilation required. Local exhaust may be required in some areas. Special
exhausting generally not
required. Mechanical exhaust usually adequate.
Respiratory Protection: Respiratory masks should be worn at all times when adequate ventilation does not
exist. A NIOSH/MSHA
respirator is acceptable.
Eye Protection: Chemical tight goggles; full face shield if splashing is possible.
Skin Protection: Coveralls and impervious foot covering is recommended.
Other Protective Clothing
or Equipment: Use impervious gloves, neoprene or rubber
Work/ Hygienic Practices: Good air flow in working area. Eyewash station and safety shower should be
available. Gloves and respiratory equipment should be worn at all times
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Gray or color of pigment additive
Odor: Slight ammonia odor
Physical State: Liquid
ph As Supplied: No Data
ph (Other): No Data
Boiling Point: 395?Fahrenheit
Melting Point: No data
Freezing Point: No Data
Vapor Pressure (mmHg) : No data
Vapor Density (Air=1): No data
Specific Gravity (Water=1): 1.05
Evaporation Rate (Butyl
Acetate=1): Slower than
Solubility in Water: 1 - 10%
Percent Solids by Weight: 100%
Percent Volatile
(grams/liter): By Weight: 0% By Volume: 0%
Volatile Organic Compounds
(VOC) (grams/liter): With Water: 0% Without Water: 0%
Viscosity: 450 CPS @ 77篎 (25篊)
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 4 of 5
10. STABILITY AND REACTIVITY
Stability: Stable
Conditions to
Avoid (Stability): Avoid excessive heat, open flam, sparks and strong oxidizing agents. Protect from
atmospheric moisture. Replace outage with inert dry nitrogen.
Incompatibility
(Materials to Avoid): Avoid strong oxidizers, acids.
Hazardous
Decomposition or
Byproducts: Carbon dioxide, carbon monoxide, nitrogen oxides.
Hazardous
Polymerization: Will not occur under normal circumstances.
Conditions to Avoid
(Polymerization): Avoid incompatible reactants, especially strong bases, water or temperatures over 160?br>
Centigrade.
11. TOXICOLOGICAL INFORMATION
Toxicological Information: No Data
12. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Use excess product in an alternate beneficial application. Dispose of according to current local,
state and federal regulations.
RCRA Hazard Class: Non-Regulate
13. TRANSPORT INFORMATION
U.S. Department of Transportation
Proper Shipping Name: Polyol Resin
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Water Transportation
Proper Shipping Name:
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Air Transportation
Proper Shipping Name:
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Other Agencies:
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 5 of 5
14. REGULATORY INFORMATION
U.S. Federal Regulations
TSCA (Toxic Substance Control Act): Section 12(b) Export Notification. This product contains the following
chemical substances subject to the reporting requirements of TSCA 12(b)
if exported from the United States: There are no TSCA 12(b) Chemicals in
this product.
CERCLA (Comprehensive Response CERCLA section 103(a) specifically requires the person in charge of a
Compensation and Liability Act): vessel or facility to report immediately to the National Response Center
(NRC) a release of a hazardous substance whose amount equals or
exceeds the assigned RQ. The following hazardous substances are
contained in this product: Chemical Name- See Section 2
SARA Title III (Comprehensive This product has been reviewed according to the EPA `Hazard Categories'
Response Compensation and Liability promulgated under Sections 311 and 312 of the Superfund Amendments
ACT: and Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
311/312 Hazard Categories: Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard: See
Section 3
313 Reportable Ingredients: This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372: Chemical Name- See
Section 2
State Regulations: California Proposition 65. The chemicals(s) noted below and contained in
this product are known to the state of California to cause cancer, birth
defects or other reproductive harm. Unless otherwise specified in Section 2
of this MSDS, these chemicals are present at <0.1%: There are no
proposition 65 chemicals known to exist in this product.
International Regulations:
15. DOCUMENTARY INFORMATION
Ecological Information: No Data
16. DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: 4036 Page 1 of 5
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: Blue Fill Part A (Activator)
Manufactured by: RPM Technology, LLC
P.O. Box 33186
Reno, NV 89533
775-473-8706
Distributed by: Blueline Technologies, LLC
265 Burns Drive
Yuba City, CA 95991
530-671-5060
FOR CHEMICAL Spill, leak, fire, exposure, or accident, call CHEMTREC day or night
EMERGENCY Domestic North America 800-424-9300 International 703-527-3887
TSCA Inventory: All components of this product are included, or are exempt from inclusion, in the EPA Toxic
Substance Control Act (TSCA) Chemical Substance Inventory.
Canadian DSL: All components of this product are included, or are exempt from inclusion, in the Canadian
Domestic Substance List (DSL).
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Components CAS# ACGIH TLV OSHA PEL % by Wgt
Diphenylmethane Diisocyanate 101-68-8 Not Determined 02 ppm Cei
Propylene Carbonate 108-32-7 Not Determined Not Established
3. HAZARDS IDENTIFICATION
Emergency Overview:
Routes of Entry: Route Entry Risk
Inhalation Possible
Ingestion Possible
Skin Contact Possible
Eye Contact Possible
Potential Health Effects: Inhalation May cause nausea and respiratory tract irritation. May cause
respiratory sensitization in susceptible individuals.
Ingestion Moderately toxic, cause abdominal cramps, nausea, swelling.
Skin Contact Product is a slight skin irritant. May Cause swelling and redness.
Eye Contact Mild eye irritant. Vapors slightly uncomfortable. Splashes irritating and
painful.
Acute Health Hazards: Acute ingestion causes burning of the mouth, throat, and stomach with abdominal pain. Acute
inhalation of vapors and mist can cause nasal discharge and pain in the eyes.
Chronic Health Hazards: If misted or at high concentrations, may cause pallor, nausea, anesthetic or narcotic effects.
Medical Conditions Skin and eye sensitization. Depending on individual skin sensitivity, chronic or
Generally Aggravated by prolonged exposure may result in irritation, blistering, burning and peeling of skin
Exposure: layers.
Carcinogenicity: OSHA: No data ACGIH: No data NTP: No data IARC: No data
Other:
4. FIRST AID MEASURES
Eye Contact: Immediately flush with plenty of water for at least 15 minutes. If redness, itching, or a burning
sensation develops, seek medical attention.
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 2 of 5
Skin Contact: Remove from skin immediately. Rinse with clean water for 20-30 minutes. Use soapy water if
needed. If redness, itching, or a burning sensation develops, seek medical attention.
Ingestion: Do NOT induce vomiting! Dilute with water and seek medical attention immediately.
Inhalation: Move victim to fresh air immediately. Give oxygen and seek medical attention.
5. FIRE FIGHTING MEASURES
Flammable Limits: Class IIIB
Flash Point, (Method Used): >200?Fahrenheit (Pensky-Marten Closed)
Auto Ignition Temperature: No Data
NFPA Hazard Rating: Health: 2 Hazard Scale Protective Equipment
Flammability: 1 0=LEAST A=SAFETY GLASSES
Reactivity: 1 1 =SLIGHT B=SAFETY GLASSES, GLOVES
Other: B 2= MODERATE C=SAFETY GLASSES, GLOVES AND APRON
3=HIGH
4=EXTREME
HMIS Hazard Rating: Health: 2
Flammability: 1
Reactivity: 1
Protection: B
Extinguishing Media: Foam/Carbon dioxide/Dry chemical/Water fog
Special Fire Fighting Remove all ignition sources. Wear self-contained breathing apparatus and complete personal
Procedures: protective equipment when entering confined areas where potential for exposure to vapors or
products exist.
Unusual Fire and Closed containers may rupture due to build-up of pressure when exposed to extreme heat.
Explosion Hazards:
Hazardous Decomposition
Products:
6. ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Avoid contact with material. Persons not wearing appropriate protective equipment should be
excluded until the spill is cleaned up. Stop spill at source, pump liquid to salvage container.
Remaining liquid may be taken up on clay, diatomaceous earth, or other absorbent.
Treat with 3-8% concentration of ammonium hydroxide or 5-10% sodium carbonate. Add
10 parts neutralizing solution/part isocyanate. Let stand 48 hours.
7. HANDLING AND STORAGE
Handling & Storage Prevent all skin and eye contact. Avoid breathing vapors. Re-seal partially used
Precautions: containers. Wash with soap and water before eating or drinking. Protect from moisture
contamination. Exothermic generation of carbon dioxide may cause dangerous pressure.
Keep away from all ignitable sources as well as extreme heat.
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 3 of 5
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation: Adequate ventilation required. Local exhaust may be required in some areas. Special
exhausting generally not
required. Mechanical exhaust usually adequate.
Respiratory Protection: Respiratory masks should be worn at all times when adequate ventilation does not
exist. A NIOSH/MSHA respirator is acceptable.
Eye Protection: Chemical tight goggles; full face shield if splashing is possible.
Skin Protection: Coveralls and impervious foot covering is recommended.
Other Protective Clothing Use impervious gloves, neoprene or rubber
or Equipment:
Work/ Hygienic Practices: Good air flow in working area. Eyewash station and safety shower should be
available. Gloves and respiratory equipment should be worn at all times
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Pale yellow to amber
Odor: Faint odor
Physical State: Liquid
ph As Supplied: No Data
ph (Other): No Data
Boiling Point: No Data
Melting Point: No data
Freezing Point: No Data
Vapor Pressure (mmHg) : No data
Vapor Density (Air=1): No data
Specific Gravity (Water=1): 1.15
Evaporation Rate (Butyl
Acetate=1): Slower than
Solubility in Water: Insoluble
Percent Solids by Weight: 100%
Percent Volatile
(grams/liter): By Weight: 0% By Volume: 0%
Volatile Organic Compounds
(VOC) (grams/liter): With Water: 0% Without Water: 0%
Viscosity: No Data
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 4 of 5
10. STABILITY AND REACTIVITY
Stability: Stable
Conditions to
Avoid (Stability): Avoid excessive heat, open flam, sparks and strong oxidizing agents. Protect from
atmospheric moisture. Replace outage with inert dry nitrogen.
Incompatibility
(Materials to Avoid): Avoid strong oxidizers, acids.
Hazardous
Decomposition or
Byproducts: Isocyanine vapors or mist, carbon dioxide, carbon monoxide, nitrogen oxides.
Hazardous
Polymerization: Will not occur under normal circumstances.
Conditions to Avoid
(Polymerization): Avoid incompatible reactants, especially strong bases, water or temperatures over 320癋(160癈).
11. TOXICOLOGICAL INFORMATION
Toxicological Information: No Data
12. DISPOSAL CONSIDERATIONS
Waste Disposal Method: Use excess product in an alternate beneficial application. Dispose of according to current local,
state and federal regulations.
RCRA Hazard Class: Non-Regulate
13. TRANSPORT INFORMATION
U.S. Department of Transportation
Proper Shipping Name: Polyisocyanate
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Water Transportation
Proper Shipping Name:
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Air Transportation
Proper Shipping Name:
Hazard Class: Non-Regulated, NOI
ID Number:
Packing Group:
Label Statement:
Other Agencies:
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
MATERIAL SAFETY DATA SHEET
Product Name: Blue Fill
Product Code: Page 5 of 5
14. REGULATORY INFORMATION
U.S. Federal Regulations
TSCA (Toxic Substance Control Act): Section 12(b) Export Notification. This product contains the following
chemical substances subject to the reporting requirements of TSCA 12(b)
if exported from the United States: There are no TSCA 12(b) Chemicals in
this product.
CERCLA (Comprehensive Response CERCLA section 103(a) specifically requires the person in charge of a
Compensation and Liability Act): vessel or facility to report immediately to the National Response Center
(NRC) a release of a hazardous substance whose amount equals or
exceeds the assigned RQ. The following hazardous substances are
contained in this product: Chemical Name- See Section 2
SARA Title III (Comprehensive This product has been reviewed according to the EPA `Hazard Categories'
Response Compensation and Liability promulgated under Sections 311 and 312 of the Superfund Amendments
ACT: and Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
311/312 Hazard Categories: Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard: See
Section 3
313 Reportable Ingredients: This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372: Chemical Name- See
Section 2
State Regulations: California Proposition 65. The chemicals(s) noted below and contained in
this product are known to the state of California to cause cancer, birth
defects or other reproductive harm. Unless otherwise specified in Section 2
of this MSDS, these chemicals are present at <0.1%: There are no
proposition 65 chemicals known to exist in this product.
International Regulations:
15. DOCUMENTARY INFORMATION
Ecological Information: No Data
16. DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES
Issue Date: 04/28/2007 Status: Final Revised
Revised Sections:
|